• Fabrication Number: ECP-AR-013
• Tootja: NTY

• Operating voltage [V]: 12
• Sensor Type: Slider
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Tootja: JP GROUP
• Lisainfo: Switch for throttle valve

• Number of pins: 3
• Colour: black
• Material: Plastic
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Chemical Properties: Paintable
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Voltage [V]: 12
• Weight [kg]: 0.04
• Operating Mode: Electric
• Number of pins: 3
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV005

• Number of pins: 3
• Operating Mode: Mechanical
• Tootja: DELPHI
• Nimetus: DE SS10992-12B1

• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Tootja: ERA

• vajaminev tükihulk: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: white
• Tootja: BREMI

• Number of connectors: 3
• Tootja: VERNET

• Mootorikood: B 6304 S
• Hulk: 2
• Nimetus: EP 1.957.010
• Tootja: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 110
• Socket colour: black
• Spanner Size: 19
• Thread Size: M10x1
• for OE number: 7439186486
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• Ehitusaasta kuni: 07.1995
• Tootja: BOSCH

• Mootorikood: B 6304 S
• Thread Size: M12x1,5
• Spanner Size: 19
• Nimetus: EP 1.830.109
• Tootja: EPS

Tootja: MAGNETI MARELLI

Tootja: MAGNETI MARELLI

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG013114371
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: B6304F,B6304G
• Resistor [Ohm]: 300
• Cable Length [mm]: 310
• Sensor Type: Inductive Sensor
• Colour: white
• Supplementary Article/Info 2: for crankshaft
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 32
• Housing Colour: black
• Weight [kg]: 0.087
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Tootja: MAGNETI MARELLI

Tootja: FAE

• Hulk: 4
• Installatsiooni pool: kahepoolne
• Fitting Position: Rear
• Number of pins: 3
• Colour: black

• Mootorikood: B 6304 S
• Hulk: 2
• Number of connectors: 2
• Weight [kg]: 0.054
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 08.1994
• for OE number: 9 186 486
• Thread Size: M10
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Switch point from [°C]: 80
• Switch point to [°C]: 25
• Weight [kg]: 0.032
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG013114361
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: B 6304 S
• Thread Size: M10x1
• Spanner Size: 19
• Nimetus: EP 1.830.110
• Tootja: EPS

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Tootja: KAMOKA

• Colour: black
• Cable Length [mm]: 285
• Number of pins: 2
• Weight [kg]: 0.04
• Resistor [Ohm]: 300
• Fitting Depth [mm]: 32
• Tootja: ERA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Tootja: NTY
• Nimetus: NTY ESL-SK-000

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Tootja: FAE

• Length [mm]: 150
• External Thread Size: M10 x 1
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.03
• Nimetus: SW 55 92 7206
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 143
• Number of pins: 2
• Connecting thread: M10 x 1
• Tootja: ERA

• Ehitusaasta kuni: 07.1995
• Tootja: BOSCH
• Nimetus: BS 0280122001

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Cable Length [mm]: 140
• Thread Size: M10x1 mm
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 74 39 186 486, 3545031, 9186486
• Tootja: MEAT&DORIA

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,200, 257
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M10x1
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Nimetus: HE 6PT009107281
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 215
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11148

• Mootorikood: B 6304 S
• Nimetus: EP 1.995.002
• Tootja: EPS

• Length [mm]: 160
• Number of pins: 3
• Weight [kg]: 0.09
• Tootja: ERA

• Mootorikood: B6304F,B6304G
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 330
• Weight [kg]: 0.06
• Nimetus: VA 254071
• Tootja: VALEO

• Mootorikood: B 6304 S
• Piirangutega toode/piirangu info 2: koos kaabliga
• Sensor Type: NTC Sensor
• Thread Size: M10x1
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Tootja: MEYLE

• Supplementary Article/Info 2: with potentiometer
• Tootja: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 1,460
• Number of pins: 2
• Fitting Depth [mm]: 57
• Tootja: ERA

• Voltage [V]: 12
• Resistor [Ohm]: 300
• Cable Length [mm]: 315
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU012680001
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Cable Length [mm]: 310
• Housing Colour: black
• Tootja: FAE

• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.138
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Tootja: MEAT&DORIA

for OE number: 46558971, 96 236 782 80, 1920 5W, 39360 22030, 0K01A 18911A, 4239216

• Ehitusaasta kuni: 08.1994
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV546

• Lambda andur: Sond
• Ehitusaasta kuni: 08.1994
• Mootorikood: B 6304 S
• Voltage [V]: 12
• Length [mm]: 1,665
• Number of circuits: 3
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV033

• Weight [kg]: 0.116
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: B 6304 S
• Installatsiooni pool: ees
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.193
• Lambda Sensor: Thread pre-greased
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 08.1994
• Installatsiooni pool: pärast katalüsaatorit
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Tootja: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 07.1995
• Lambda andur: Diagnoosisond, Sond
• Installatsiooni pool: pärast katalüsaatorit, katalüsaatori ees
• Plokieraldus:
• Ehitusaasta alates: 09.1994
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Tootja: BOSCH
• Nimetus: BS 0258986505

• Ehitusaasta kuni: 08.1994
• Lambda andur: Sond
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 1,700
• Thread Size: M18x1,5
• Cable Length [mm]: 1,530
• Conductor Number: 3
• Weight [kg]: 0.211
• Lambda Sensor: Thread pre-greased
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 08.1994
• Lambda andur: Sond
• Cable Length [mm]: 2
• Lambda Sensor: Finger probe, Heated
• Tootja: DELPHI
• Nimetus: DE ES10957-12B1

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.23
• Warranty: 3 years warranty
• Nimetus: CE 09SKV400
• Tootja: ESEN SKV

• Lambda Sensor: Regulating Probe
• Number of pins: 3
• Cable Length [mm]: 1,550
• for OE number: 60537650
• Tootja: MEAT&DORIA

• Ehitusaasta alates: 09.1995
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Weight [kg]: 0.4
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY

• Number of pins: 3
• Cable Length [mm]: 160
• Sensor Type: Hall Sensor
• Tootja: METZGER

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 6
• Weight [kg]: 0.57
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Length [mm]: 180
• Tootja: FAE

• Ehitusaasta alates: 09.1994
• Ehitusaasta kuni: 07.1995
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Tootja: BOSCH

• Ehitusaasta kuni: 07.1995
• Tootja: BOSCH