• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Tootja: VERNET
• Lisainfo: OS3561 VERNET

• Mootorikood: B 200 FT
• Pressure [bar]: 1
• Thread Size: M14x1,5
• Spanner Size: 24
• Nimetus: OLISURVELšLITUS
• Tootja: EPS

• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Tootja: SWAG
• Nimetus: SW 55 91 5076

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Passive sensor
• for OE number: 9118368
• Tootja: KAMOKA

• Pistikkontaktide arv: 1
• Lülitusrõhk alates [bar]: 0,39
• Lülitusrõhk kuni [bar]: 0,58
• Keermemõõt: M 14 x 1,5
• Värv: must
• Piirangutega toode/piirangu info: koos tihenditega
• Tootja: METZGER

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor, Active sensor
• Tootja: KAMOKA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195051110100
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Thread Size: M12x1.5
• Tootja: VERNET

• Mootorikood: B 200 FT
• Väliskeere [mm]: M12x1,5
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.149, 1.880.151
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Ehitusaasta kuni: 07.1997
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Flange Hole Diameter [mm]: 8
• for OE number: 5946 21, 004 153 90 28, 89615 05010
• Tootja: MEAT&DORIA

• Ehitusaasta kuni: 07.1997
• Tootja: BOSCH

• Mootorikood: B 200 FT
• Nimetus: DETONATSIOONIANDUR
• Tootja: EPS

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PG013114371

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Weight [kg]: 0.053
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Tootja: MAGNETI MARELLI

• Resistor [Ohm]: 170
• Cable Length [mm]: 500
• Sensor Type: Inductive Sensor, Passive sensor
• Supplementary Article/Info 2: for crankshaft
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 23.7
• Weight [kg]: 0.095
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 57
• External Thread Size: M16 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Surface: Zinc-coated
• Weight [kg]: 0.05
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: B 200 FT
• Number of connectors: 2
• Weight [kg]: 0.054
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: 5/8'' x 18 UNF
• Tootja: ERA

• Ehitusaasta alates: 05.1996
• Thread Size: 5/8x18 UNF
• Tootja: VERNET

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG013114361
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Tootja: KAMOKA

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Tootja: NTY
• Nimetus: NTY ESL-SK-000

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Tootja: FAE

• Mootorikood: B 200 FT
• Nimetus: ANDUR,DROSSELKLAPIASEND
• Tootja: EPS

• Number of pins: 3
• Connector Shape: rectangular
• Tootja: FAE

• Lambda andur: Sond, Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Nimetus: CE 09SKV903
• Tootja: ESEN SKV

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with connector parts
• Cable Length [mm]: 530
• Number of pins: 3
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: MEY

• Lambda andur: Sond, Bistabiilne andur
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• Pinge [V]: 12
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Nimetus: CE 09SKV913
• Tootja: ESEN SKV

• Ehitusaasta kuni: 07.1997
• Tootja: BOSCH

• Ehitusaasta alates: 07.1997
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Kaablipikkus (mm): 440
• Tootja: METZGER

• Lambda andur: Sond
• Ehitusaasta kuni: 08.1996
• Mootorikood: B 200 FT
• Pinge [V]: 12
• Pikkus (mm): 1 095
• Ülekandeliinide arv: 3
• Kaal (kg): 0,12
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV052

• Lambda andur: Sond
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• for OE number: UNIVERSAL fit
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Lambda Sensor: Heated, Finger probe, Lambda Sensor
• Tootja: DENSO
• Nimetus: DN DOX-0116
• Lisainfo: DOX-0116 DENSO

• Ehitusaasta kuni: 08.1996
• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 1 100
• Ülekandeliinide arv: 3
• Kaal (kg): 0,17
• Takistus [oom]: 4,5
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Tootja: SKV GERMANY

• Ehitusaasta kuni: 07.1997
• Kvaliteediklass: PJ
• Nimetus: Air flow sensor

• Ehitusaasta kuni: 07.1997
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Ehitusaasta kuni: 08.1996
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 995
• Connector Shape: angular
• Thread Size: M18x1,5
• Length [mm]: 1,100
• Overall Length [mm]: 915
• Number of pins: 3
• Weight [kg]: 0.156
• Lambda Sensor: Thread pre-greased
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 09.1996
• Ehitusaasta kuni: 07.1997
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 3
• Overall Length [mm]: 915
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Nimetus: LAMBDA ANDUR
• Tootja: BOS