• Mootorivarustus: kahemassilise hoorataga mootorite jaoks
• Tootja piirang: Sachs
• Supplementary Article/Info 2: without clutch slave cylinder
• Friction Lining Outer Diameter [mm]: 240
• Number of Teeth: 23
• Weight [kg]: 6.9
• Multi-piece: two-piece

Lisainfo: Audi A3 00->03, Ford Galaxy 95->06, Seat Alhambra 96->10, Cordoba 02->09, Ibiza 02->09, Leon 00->06, Toledo 00->06, Skoda Fabia 03->08, Octavia 02->04, VW Bora 00->05, Golf 00->06, Sharan 95->10 6 poldi kinnitus Sachs hoorattale sees Valeo ketas ja korv

• General Information: Clutch kit
• Tootja: VIKA

• Ehitusaasta kuni: 04.2007
• Mootorikood: ASZ
• Kastitüüp: FJW,HDS
• Käigukasti liik: Käigukast 6 käiku
• Number of Teeth: 23
• Hub Profile: 24,3 x 21,8
• Supplementary Article/Info 2: with clutch disc
• Extention Force [N]: 6,700
• Outer Diameter [mm]: 240
• Nimetus: Clutch kit
• Kvaliteediklass: PJ

Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate Lisainfo: "Tootja: SRL
SEAT ALHAMBRA
(kvaliteediklass: PJ)"

• hoorattatootjale: LUK
• Supplementary Article/Info 2: with clutch disc
• Diameter [mm]: 240
• Nimetus: Clutch kit
• Kvaliteediklass: PJ

Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"

• hoorattatootjale: LUK
• Diameter [mm]: 240
• Number of Teeth: 23
• Supplementary Article/Info 2: without clutch release bearing
• Lisainfo: Clutch Kit

• Outer Diameter [mm]: 241
• Number of Teeth: 23
• Multi-piece: two-piece
• Supplementary Article/Supplementary Info: with synthetic grease
• Weight [kg]: 5.672
• Observe service information:
• Tootja: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Multi-piece: two-piece
• Number of Teeth: 23
• Hub Profile: 21.8x24.3
• Supplementary Article/Supplementary Info: without central slave cylinder
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Nimetus: SIDURIKOMPLEKT
• Tootja: RMC

• Outer Diameter [mm]: 241
• Number of Teeth: 23
• Multi-piece: two-piece
• Supplementary Article/Supplementary Info: with synthetic grease
• Weight [kg]: 6.142
• Observe service information:
• Tootja: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1253762
• Number of Teeth: 23
• Supplementary Article/Supplementary Info: with clutch pressure plate
• Engine Features/Arrangement: for engines with dual-mass flywheel
• Friction Lining Outer Diameter [mm]: 240
• Tootja: KAMOKA SPRZÊG£A

Supplementary Article/Info 2: without clutch release bearing, with flywheel, with clutch disc, with screw set

• hoorattatootjale: Sachs
• Diameter [mm]: 240
• Supplementary Article/Supplementary Info: with central slave cylinder
• Engine Features/Arrangement: for engines with dual-mass flywheel
• Supplementary Article/Info 2: Check and replace dual-mass flywheel if necessary.
• Lisainfo: Clutch Kit

• siduritootjate jaoks: Sachs
• for flywheel manufacturer: Sachs
• Outer Diameter [mm]: 241
• Number of Teeth: 23
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with central slave cylinder, with synthetic grease
• Weight [kg]: 5.865
• Observe service information:
• Tootja: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 04.2007
• Mootorikood: ASZ, BLT
• Kastitüüp: FJW,HDS, HDS
• Käigukasti liik: Käigukast 6 käiku
• hoorattatootjale: LUK
• Plokieraldus:
• Ehitusaasta alates: 10.2005
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Number of Teeth: 23
• Hub Profile: 24,3 x 21,8
• Supplementary Article/Supplementary Info: without central slave cylinder
• Clutch: for vehicles with push type clutch
• Weight [kg]: 5.35
• Tootja: VALEO
• Nimetus: VA 826747

General Information: Valeo Clutch Kit with hydraulic bearing also available

• Diameter [mm]: 240
• Number of Teeth: 23
• Supplementary Article/Info 2: without clutch release bearing
• Observe service information:
• Nimetus: SIDURIKOMPLEKT
• Tootja: SAC

SVHC: No information available, please contact the manufacturer!

• Multi-piece: three-piece
• Number of Teeth: 23
• Hub Profile: 21.8x24.3
• Supplementary Article/Supplementary Info: with central slave cylinder
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Nimetus: SIDURIKOMPLEKT
• Tootja: RMC

• hoorattatootjale: Sachs
• Diameter [mm]: 240
• SVHC: No SVHC present!
• Nimetus: SIDURIKOMPLEKT
• Tootja: LUK

• siduritootjate jaoks: LUK
• for flywheel manufacturer: LuK
• Outer Diameter [mm]: 239
• Number of Teeth: 23
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with central slave cylinder, with synthetic grease
• Weight [kg]: 6.1
• Observe service information:
• Tootja: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• hoorattatootjale: LuK
• Diameter [mm]: 240
• SVHC: No SVHC present!
• Nimetus: SIDURIKOMPLEKT
• Tootja: LUK

• Supplementary Article/Info 2: with clutch disc, with clutch release bearing
• Tootja: FAST

• Supplementary Article/Info 2: with flywheel
• Number of Teeth: 23
• Fabrication Number: NZS-VW-007
• Tootja: NTY
• Nimetus: NTY NZS-VW-007

• Diameter [mm]: 240
• Number of Teeth: 23
• Alternative Repair Kit: 3000 950 070
• Nimetus: SIDURIKOMPLEKT
• Tootja: SAC

SVHC: No information available, please contact the manufacturer!

• hoorattatootjale: LuK
• Diameter [mm]: 240
• Supplementary Article/Supplementary Info: with central slave cylinder
• SVHC: No SVHC present!
• Nimetus: SIDURIKOMPLEKT
• Tootja: LUK

• Ehitusaasta kuni: 04.2007
• Mootorikood: ASZ, BLT
• Kastitüüp: FJW,HDS, HDS
• Käigukasti liik: Käigukast 6 käiku
• hoorattatootjale: SACHS
• Plokieraldus:
• Ehitusaasta alates: 10.2005
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Number of Teeth: 23
• Hub Profile: 24,3 x 21,8
• Supplementary Article/Supplementary Info: with central slave cylinder
• Number of mounting bores at central slave cylinder: 3
• Bore Diameter [mm]: 31
• Material: Aluminium
• Supplementary Article/Info 2: without sensor
• Weight [kg]: 5.92
• Nimetus: SIDURIKOMPLEKT
• Tootja: VAL

• hoorattatootjale: Sachs
• Diameter [mm]: 240
• Supplementary Article/Supplementary Info: with central slave cylinder
• SVHC: No SVHC present!
• Nimetus: SIDURIKOMPLEKT
• Tootja: LUK

• Kerenumber (VIN) kuni: 7B453805, 74136626
• hoorattatootjale: LUK
• Plokieraldus:
• Hub Profile: 21,8x24,2-23N
• Friction Lining Outer Diameter [mm]: 240
• Supplementary Article/Supplementary Info: with central slave cylinder
• Nimetus: SIDURIKOMPLEKT
• Tootja: MAX

• Multi-piece: three-piece
• Number of Teeth: 23
• Hub Profile: 21.9x24.2
• Supplementary Article/Supplementary Info: without central slave cylinder
• Supplementary Article/Info 2: with flywheel, with screw set
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Nimetus: SIDURIKOMPLEKT
• Tootja: RMC

Clutch: Conversion from dual-mass flywheel to single-mass flywheel

• Multi-piece: four-piece
• Number of Teeth: 23
• Hub Profile: 21.9x24.2
• Supplementary Article/Supplementary Info: with central slave cylinder
• Supplementary Article/Info 2: with flywheel, with screw set
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Nimetus: SIDURIKOMPLEKT
• Tootja: RMC

Clutch: Conversion from dual-mass flywheel to single-mass flywheel

• Ehitusaasta kuni: 04.2007
• Mootorikood: ASZ, BLT
• Kastitüüp: FJW,HDS, HDS
• Käigukasti liik: Käigukast 6 käiku
• hoorattatootjale: SACHS
• Plokieraldus:
• Ehitusaasta alates: 10.2005
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Number of Teeth: 23
• Hub Profile: 24,3 x 21,8
• Supplementary Article/Supplementary Info: without central slave cylinder
• Clutch: for vehicles with push type clutch
• Weight [kg]: 5.76
• Tootja: VALEO

General Information: Valeo Clutch Kit with hydraulic bearing also available

• Outer Diameter [mm]: 241
• Number of Teeth: 23
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with bolts/screws, with flywheel
• Weight [kg]: 16.865
• Observe service information:
• Tootja: BLUE PRINT SPRZEGLA

Clutch: Conversion from dual-mass flywheel to single-mass flywheel General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 04.2007
• Mootorikood: ASZ
• Kastitüüp: FJW,HDS
• Käigukasti liik: Käigukast 6 käiku
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8 mm
• Supplementary Article/Info 2: with flywheel, with clutch disc, with screw set
• Extention Force [N]: 7,200
• Outer Diameter [mm]: 240
• Nimetus: Clutch kit
• Kvaliteediklass: PJ

Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate Clutch: Conversion from dual-mass flywheel to single-mass flywheel Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"

• Outer Diameter [mm]: 241
• Number of Teeth: 23
• Multi-piece: four-piece
• Supplementary Article/Supplementary Info: with central slave cylinder, with synthetic grease
• Supplementary Article/Info 2: with flywheel
• Weight [kg]: 17.995
• Observe service information:
• Nimetus: Sidurikomplekt
• Tootja: BLP

Clutch: Conversion from dual-mass flywheel to single-mass flywheel General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 038 105 266 CE
• Number of Teeth: 23
• Supplementary Article/Supplementary Info: with clutch pressure plate
• Engine Features/Arrangement: for engines with dual-mass flywheel
• Tootja: KAMOKA SPRZÊG£A

Supplementary Article/Info 2: without clutch release bearing, with flywheel, with clutch disc, with screw set

• Ehitusaasta kuni: 04.2007
• Käigukasti liik: Käigukast
• Mootorikood: ASZ, BLT
• Specification: SMF conversion, with bearing
• Supplementary Article/Supplementary Info: with clutch pressure plate
• Diameter [mm]: 240
• Number of Teeth: 23
• Tootja: AISIN

Supplementary Article/Info 2: with clutch disc, with flywheel, with clutch release bearing, Measurement differs from original

• Käigukasti liik: Käigukast
• Ehitusaasta kuni: 04.2007
• New Part:
• Tightening Torque [Nm]: 60
• Tightening angle [degrees]: 90
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Number of Teeth: 23
• Weight [kg]: 17.72
• Nimetus: SIDURIKOMPLEKT
• Tootja: VAL

Supplementary Article/Supplementary Info: with single-mass flywheel, with central slave cylinder Clutch: Conversion from dual-mass flywheel to single-mass flywheel

• Ehitusaasta kuni: 04.2007
• Mootorikood: ASZ, BLT
• Kastitüüp: FJW,HDS, HDS
• Käigukasti liik: Käigukast 6 käiku
• Plokieraldus:
• Ehitusaasta alates: 10.2005
• New Part:
• Tightening Torque [Nm]: 60
• Tightening angle [degrees]: 90
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8
• Weight [kg]: 17.59
• Nimetus: SIDURIKOMPLEKT
• Tootja: VAL

Supplementary Article/Supplementary Info: with single-mass flywheel, without central slave cylinder Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch Supplementary Article/Info 2: with screw set, Special tools for mounting not necessary

• Ehitusaasta kuni: 04.2007
• Mootorikood: ASZ, BLT
• Kastitüüp: FJW,HDS, HDS
• Käigukasti liik: Käigukast 6 käiku
• Plokieraldus:
• Ehitusaasta alates: 10.2005
• New Part:
• for flywheel manufacturer: LUK
• Number of mounting bores: 6
• Supplementary Article/Info 2: with screw set, with lock screw set
• Tightening Torque [Nm]: 60
• Tightening angle [degrees]: 90
• Clutch Pressure Plate Outer Diameter [mm]: 241
• Number of Teeth: 23
• Weight [kg]: 16.85
• Nimetus: SIDURIKOMPLEKT
• Tootja: VAL
• Lisainfo: VAL837304

Supplementary Article/Supplementary Info: with dual-mass flywheel, with central slave cylinder

• Multi-piece: four-piece
• Number of Teeth: 23
• Hub Profile: 21.9x24.2
• Adjustment: without automatic adjustment
• Supplementary Article/Info 2: with screw set
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Nimetus: Sidurikomplekt
• Tootja: RMC

Supplementary Article/Supplementary Info: with central slave cylinder, with dual-mass flywheel

• Diameter [mm]: 240
• Number of Teeth: 23
• for components see parts list:
• Mounting Type: not pre-mounted
• Supplementary Article/Info 2: without clutch release bearing, with clutch disc
• Nimetus: SIDURIKOMPLEKT
• Tootja: SAC

Supplementary Article/Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws SVHC: No information available, please contact the manufacturer!

• Diameter [mm]: 240
• Number of Teeth: 23
• for components see parts list:
• Mounting Type: not pre-mounted
• Supplementary Article/Info 2: with clutch disc
• Nimetus: SIDURIKOMPLEKT
• Tootja: SAC

Supplementary Article/Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws SVHC: No information available, please contact the manufacturer!

• Supplementary Article/Supplementary Info: with central slave cylinder
• Supplementary Article/Info 2: with flywheel, with screw set
• Number of mounting bores: 6
• SVHC: No SVHC present!
• Nimetus: SIDURIKOMPLEKT
• Tootja: LUK

• Outer Diameter [mm]: 240
• Number of Teeth: 23
• Multi-piece: four-piece
• Supplementary Article/Info 2: with flywheel
• Weight [kg]: 16.852
• Observe service information:
• Tootja: BLUE PRINT

Supplementary Article/Supplementary Info: with central slave cylinder, with synthetic grease, with flywheel screws, with pressure plate screws, with dual-mass flywheel General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.