Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Mootorikood: AFH
- Switch point from [bar]: 0.15
- Switch point to [bar]: 0.35
- Colour Coding: blue
- Number of connectors: 1
- External Thread [mm]: M10x1
- Lisainfo: PAKENDIS 10 tk
- Mootorikood: AUB
- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- Colour Coding: green
- Number of connectors: 1
- External Thread [mm]: M10X1
- Lisainfo: PAKENDIS 10 tk
- Thread Size: M10x1
- Length [mm]: 46
- Spanner Size: 24
- Colour Coding: white
- Number of pins: 1
- Tootja: DELLO AUTOMEGA
- Thread Size: M10
- Colour Coding: brown
- Number of pins: 1
- Switch Pressure [bar]: 0.3
- Spanner Size: 24
- Supplementary Article/Supplementary Info: with seal
- for OE number: 056919081C
- Tootja: DELLO AUTOMEGA
- Plug Type: Blade Terminal
- Operating Mode: Hydraulic
- Colour Coding: brown
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Shifting Points [bar]: 0.3
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Switch point from [bar]: 1.6
- Switch point to [bar]: 2
- Lisainfo: PAKENDIS 10 tk
- Plug Type: Blade Terminal
- Operating Mode: Hydraulic
- Colour Coding: blue
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
15 - 0, 35 - Tootja: TOPRAN
- Lisainfo: 100 345 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Mootorikood: AFH
- Pressure [bar]: 0
- Thread Size: M10x1
- Spanner Size: 24
- Nimetus: EP 1.800.108
- Tootja: EPS
-
Lisainfo: 1-
800- 108
- Värvimarkeering: must
- Võtmekaugus: 13
- Keermemõõt: M10x1
- Pistikkontaktide arv: 1
- Pistikute teostus: Lamepistik
- Piirangutega toode/piirangu info: koos tihendiga
- OE-numbri jaoks: 7203359
- Tootja: DELLO AUTOMEGA
- Mootorikood: AFH
- Switch point from [bar]: 0.75
- Switch point to [bar]: 1.05
- External Thread [mm]: M10x1
- Number of connectors: 1
- Colour Coding: grey
- Lisainfo: PAKENDIS 10 tk
-
Kerenumber (VIN) alates: 6K-
X- 068401 - Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: blue
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
15 - 0, 35 - Supplementary Article/Info 2: with seal ring
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Mootorikood: AFH
- Length [mm]: 46
- Switch point from [bar]: 0.15
- Switch point to [bar]: 0.35
- Inner Diameter [mm]: 2.54
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Tootja: SWAG
- Nimetus: SW 30 23 0002
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mootorikood: AFH
- Switch point from [bar]: 0.15
- Length [mm]: 46
- Switch point to [bar]: 0.35
- Inner Diameter [mm]: 2.54
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Switch point from [bar]: 1.6
- Length [mm]: 46
- Switch point to [bar]: 2
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: white
-
Surface: Zinc-
coated - Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Tootja: SWAG
- Nimetus: SW 30 23 0001
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 46
- Switch point from [bar]: 1.6
- Switch point to [bar]: 2
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: white
-
Surface: Zinc-
coated - Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: grey
- Pressure [bar]: 0.9
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- vajaminev tükihulk: 1
- Colour: white
- Pressure [bar]: 1.8
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Colour: blue
- Shifting Points [bar]: 0.25
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thread Size: M 10x1
- Colour: brown
- Spanner Size: 24
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure [bar]: 0.25
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Supplementary Article/Supplementary Info: with seal
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Mootorikood: AFH
- Length [mm]: 46
- Switch point from [bar]: 0.75
- Switch point to [bar]: 1.05
- Inner Diameter [mm]: 2.48
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: grey
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Tootja: SWAG
- Nimetus: SW 30 23 0004
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mootorikood: AQQ
- Pressure [bar]: 1
- Thread Size: M10x1
- Spanner Size: 24
- Nimetus: EP 1.800.139
- Tootja: EPS
- Mootorikood: AFH
- Switch point from [bar]: 0.75
- Length [mm]: 46
- Switch point to [bar]: 1.05
- Inner Diameter [mm]: 2.48
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: grey
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mootorikood: AQQ
- Thread Size: M10x1
- Spanner Size: 13
- Corresponds to the original part in colour: white
- Nimetus: EP 1.830.154
- Tootja: EPS
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.15
- Pressure to [bar]: 0.35
- Number of pins: 1
- Plug Type: Blade Terminal
- Corresponds to the original part in colour: blue
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Tootja: HELLA
- General Information: oil pressure switch
- Tootja: BORSEHUNG
- Mootorikood: AUB
- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: green
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Nimetus: SW 30 91 9014
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mootorikood: AUB
- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: green
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: brown
-
Control Range [bar]: 0.55/
0.85BAR - General Information: oil pressure switch
- Tootja: BORSEHUNG
- Housing Type: Aluminium Housing
- Height [mm]: 82
- Supplementary Article/Supplementary Info: with seal
- Fitting Depth [mm]: 54
-
Fabrication Number: EPO-
AU- 000 -
Nimetus: NTY EPO-
AU- 000 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pistikkontaktide arv: 1
-
Kaal (kg): 0,
3 - pakendi pikkus [cm]: 12
- pakendi laius [cm]: 8
- pakendi kõrgus [cm]: 6
- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Kinnitusaukude hulk: 3
- Korpusetüüp: Alumiiniumkorpus
-
Korpuse materjal: Plastik,
Polyamid 6.6 - Korpusevärv: must
- Sõidukivarustus: Õlitaseme anduriga sõidukile
-
OE-numbri jaoks: 1 119 169,
1J0 907 660B - jälgida süsteemi mahutavust:
- Tootja: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Kerenumber (VIN) alates: 6K-
X- 400 000 -
Kerenumber (VIN) kuni: 6K-
X- 499 999 - Kasutuspinge [V]: 12
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 3
- Lisainfo: Oil level sensor
-
Mootorikood: AUB,
AQQ - Ühenduste arv: 3
-
Kaal (kg): 0,
1 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.