Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48
- Outer Diameter [mm]: 272
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 10
- Tootja: KAMOKA
- Kogus pakendis: 2
- Lisainfo: 103171
-
PR-numbri jaoks: 1ZE,
1ZJ - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
-
PR-numbri jaoks: 1ZA,
1ZK - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
-
PR-numbri jaoks: 1LD,
1LJ - Fitting Position: Front Axle
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 255
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
-
PR-numbri jaoks: 1KE,
2EJ - Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Miinimumjämedus (mm): 8
- Piduriketta liik: täis
-
Ava läbimõõt [mm]: 15,
3 -
Pidurikettajämedus [mm]: 9,
7 - Ava Ø (mm): 112
- Aukude arv: 9
-
Siseläbimõõt [mm]: 174,
5 -
Kõrgus (mm): 48,
2 - Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 272
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- PR-numbri jaoks: 1KE
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.3
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 8
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Brake Disc Thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 272
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Weight [kg]: 4.11
- for OE number: 5Q0 615 601 D
- Observe service information:
- Tootja: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Brake Disc Thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 272
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Weight [kg]: 4.11
- for OE number: 5Q0 615 601 D
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- kombineeritud PR-numbrile: 1KE+2EC
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 48.3
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Outer Diameter [mm]: 272
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 272
- Hub Diameter [mm]: 150
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48.4
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Replace in pairs only:
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- PR-numbri jaoks: 1KE
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.3
- Centering Diameter [mm]: 65
- Surface: Painted
- Minimum thickness [mm]: 8
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Brake Disc Type: solid
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0250/ 1401 - Surface: Coated
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 48.3
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG4324C
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Välisläbimõõt [mm]: 272
-
Kõrgus (mm): 48,
3 - Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Pealispind: värvitud
-
Kaal (kg): 8,
4 - Miinimumjämedus (mm): 8
- Tootja: TOMEX BRAKES
- Installatsiooni pool: Tagasild
- Pidurisuurus: 15"
- Kogus pakendis: 2
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 253
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 8
- Weight [kg]: 3.54
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Välisläbimõõt [mm]: 272
-
Kaal (kg): 3,
924 -
Kõrgus (mm): 48,
3 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 8
-
Ava läbimõõt kuni [mm]: 15,
35 - Nimetus: ALT 127954FCAL
- Tootja: ALTE AUTOMOTIVE
- PR-numbri jaoks: 1KE
- Tunnussuurus: DP1010.11.0318
- Kogus pakendis: 2
- Veljeaukude hulk: 5
- Installatsiooni pool: Tagasild
-
Kõrgus (mm): 48,
3 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
-
Välisläbimõõt [mm]: 271,
8 - Aukude arv: 4
- Tsentri läbimõõt (mm): 65
- Aukudearv 1: 1
- Tootja: DRIVE
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Number of Holes: 9
- Rim Hole Number: 5
-
Thread Size: 15,
3 - Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.3
- Centering Diameter [mm]: 65
- Colour: black
- Surface: Painted
-
Test Mark: E190R-
02C0190/ 0261 - Tootja: TRW
- Kvaliteediklass: Q
- Nimetus: Brake discs
SVHC: No information available, please contact the manufacturer!
- PR-numbri jaoks: 1ZE
- Installatsiooni pool: Esisild
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 288
- Bolt Hole Circle Ø [mm]: 112
- Tootja: DELLO AUTOMEGA
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48.3
- Minimum thickness [mm]: 8
- Surface: Coated
- Inner Diameter [mm]: 149
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 3.9
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355116971
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- PR-numbri jaoks: 1ZK
- Installatsiooni pool: Esisild
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Tootja: DELLO AUTOMEGA
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Miinimumjämedus (mm): 22
- Piduriketta liik: õhutusega
-
Ava läbimõõt [mm]: 15,
3 - Pidurikettajämedus [mm]: 25
- Ava Ø (mm): 112
- Aukudearv 2: 9
- Aukude arv: 5
- Siseläbimõõt [mm]: 144
-
Kõrgus (mm): 49,
9 - Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 288
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Height [mm]: 48.3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: solid
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Surface: Coated
-
Supplementary Article/Info 2: with bolts/
screws -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.3
- Nimetus: PIDURIKETAS
- Tootja: BOS
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
0N4, 1KE, 2EJ - Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Brake Disc Type: solid
- Minimum thickness [mm]: 8
- Height [mm]: 48.3
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Lisainfo: QD4597
- PR-numbri jaoks: 1ZE
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.5
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Nimetus: PIDURIKETAS
- Tootja: MAX
- PR-numbri jaoks: 1KE
- Fitting Position: Rear Axle
-
Brake Disc Type: solid,
slotted/ perforated - Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.3
- Centering Diameter [mm]: 65
- Surface: Painted
- Minimum thickness [mm]: 8
- Nimetus: PIDURIKETAS
- Tootja: MAX
- PR-numbri jaoks: 1ZE
- Brake Disc Thickness [mm]: 25
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 49.7
- Outer Diameter [mm]: 288
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 7.56
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- PR-numbri jaoks: 1ZE
- Brake Disc Thickness [mm]: 25
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 50
- Outer Diameter [mm]: 288
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 7.56
- Observe service information:
- Tootja: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- PR-numbri jaoks: 1KE
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 272
- Height [mm]: 48.3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Surface: Zink flake coated
-
Supplementary Article/Info 2: with bolts/
screws - Quality: PREMIUM
- Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 272
- Surface: Coated
- Minimum thickness [mm]: 8
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.B413.11
- Kvaliteediklass: Q
-
Installatsiooni pool: Esisild,
esisild paremal, esisild vasakul - Pidurikettajämedus [mm]: 25
- Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 288
- Piduriketta liik: õhutusega
-
Keermemõõt: 15,
5 -
Kõrgus (mm): 49,
5 -
Tootja: AUTO-
GH
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- tootekoodile: LP3663
- valikuliselt:
- Kogus pakendis: 2
- Brake Disc Type: Vented
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0277/ 1358 - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49.6
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG3833C
- Lisainfo: BG3833C DELPHI
- Installatsiooni pool: Tagasild
- kombineeritud PR-numbrile: 1KS+0N4
-
PR-numbri jaoks: 1KE,
2EJ - Kogus pakendis: 2
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 8
- Weight [kg]: 3.9
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- PR-numbri jaoks: 1ZE
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.5
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Minimum thickness [mm]: 22
- Nimetus: PIDURIKETAS
- Tootja: MAX
- PR-numbri jaoks: 1ZK
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Test Mark: ECE R90
-
Article number of recommended accessories: 131-
07- 139, 131- 07- 140 - Replace in pairs only:
- Required quantity: 2
-
Tootja: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49.5
- Number of Holes: 9
-
Thread Size: 15,
5 - Bolt Hole Circle Ø [mm]: 112
-
Machining: High-
carbon - Colour: black
- Surface: Painted
-
Test Mark: E190R-
02C0176/ 0490 - Nimetus: PIDURIKETAS
- Tootja: TRW
- Kvaliteediklass: Q
SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 2EJ
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Brake Disc Type: solid
- Minimum thickness [mm]: 8
- Height [mm]: 58.2
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
-
Installatsiooni pool: Esisild,
esisild paremal, esisild vasakul - Pidurikettajämedus [mm]: 25
- Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 312
- Piduriketta liik: õhutusega
-
Keermemõõt: 15,
4 -
Kõrgus (mm): 49,
9 -
Tootja: AUTO-
GH
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Outer Diameter [mm]: 272
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Surface: Coated
- Brake System: BOSCH
-
Hole Arrangement/Number: 5/
10 - Tootja: OPTIMAL ZAWIESZENIE
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48.3
- Minimum thickness [mm]: 8
- Surface: Coated
- Inner Diameter [mm]: 149
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 30.8
- Packaging width [cm]: 30.8
- Packaging height [cm]: 12.7
- Weight [kg]: 3.9
- Nimetus: PIDURIKETAS
- Tootja: TEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
- Kontrolltähistus: R90 Homologated
- Kõrgus (mm): 48
-
Kaal (kg): 6,
2 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 9
- Puurpilt/auguarv: 5+4+1
- Välisläbimõõt [mm]: 272
- Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Väändejõud [Nm]: 120
- Pealispind: kaetud
- Pidurisüsteem: BOSCH
- Konteineri tüüp: Sahtel
- Hulgaühik: Komplekt
- Piirangutega toode/piirangu info 2: koos kruvidega
- Versioon: JC
-
pakendi pikkus [cm]: 30,
5 -
pakendi laius [cm]: 30,
5 -
pakendi kõrgus [cm]: 11,
5 - Tootja: JURID
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49.7
- Rim Hole Number: 5
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Hub Diameter [mm]: 154
- Weight [kg]: 7.3
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: A.B.S.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Height [mm]: 49.5
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Number of bores: 1
- Outer Diameter [mm]: 288
- Number of Holes: 9
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Nimetus: SK VKBD80005V2
- Tootja: SKF
- Pidurisüsteem: Ate
- kombineeritud PR-numbrile: 1ZE+1ZP
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 49.8
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 288
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Välisläbimõõt [mm]: 288
-
Kõrgus (mm): 49,
5 - Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Pealispind: värvitud
-
Kaal (kg): 14,
85 - Miinimumjämedus (mm): 22
- Tootja: TOMEX BRAKES
- PR-numbri jaoks: 1ZK
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Centering Diameter [mm]: 65
- Height [mm]: 49.9
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Fitting Position: Front Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Outer Diameter [mm]: 272
- Height [mm]: 48.3
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Surface: Coated
- Rim Hole Number: 9
- Nimetus: Piduriketas
- Tootja: QUARO
- Installatsiooni pool: Tagasild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 22
- Välisläbimõõt [mm]: 310
- Üldine informatsioon: brake disc; rear
- Tootja: VIKA
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZF,
1ZH - Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 24
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 21
- Height [mm]: 49.6
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Lisainfo: QD8161
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZA,
1ZK - Kogus pakendis: 2
- Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
-
Lisainfo: 100-
3300- 20
- PR-numbri jaoks: 1ZE
- Fitting Position: Front Axle
- Outer Diameter [mm]: 288
- Height [mm]: 49.8
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: Vented
- Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
- PR-numbri jaoks: 1KE
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 9.7
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 9
-
Supplementary Article/Info 2: with bolts/
screws - Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Bore Diameter [mm]: 15.3
- MAPP code available:
-
Test Mark: E1 90R-
02C0165/ 0523 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KY
- Outer Diameter [mm]: 310
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Height [mm]: 48.5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: Vented
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Surface: Coated
-
Machining: High-
carbon -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.3
- Nimetus: PIDURIKETAS
- Tootja: BOS
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZE,
1ZJ - Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Lisainfo: QD1754
- PR-numbri jaoks: 1ZK
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Välisläbimõõt [mm]: 312
-
Kõrgus (mm): 49,
9 - Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Pealispind: värvitud
-
Kaal (kg): 17,
7 - Miinimumjämedus (mm): 22
- Tootja: TOMEX BRAKES
- PR-numbri jaoks: 1ZE
- Tunnussuurus: DP1010.11.0853
- Kogus pakendis: 2
- Veljeaukude hulk: 5
- Installatsiooni pool: Esisild
-
Kõrgus (mm): 49,
7 - Piduriketta liik: õhutusega
-
Pidurikettajämedus [mm]: 24,
9 - Miinimumjämedus (mm): 22
-
Välisläbimõõt [mm]: 287,
8 - Aukude arv: 4
- Tsentri läbimõõt (mm): 65
- Aukudearv 1: 1
- Tootja: DRIVE
- Installatsiooni pool: Esisild
- kombineeritud PR-numbrile: 1LJ+1ZA+1ZD
- Pidurisüsteem: Trw
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 49.6
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Kogus pakendis: 2
- Brake Disc Type: Vented
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0277/ 1198 - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 24.9
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49.6
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG3953C
- Lisainfo: BG3953C DELPHI
- PR-numbri jaoks: 1ZK
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.9
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Minimum thickness [mm]: 22
- Nimetus: PIDURIKETAS
- Tootja: MAX
-
Lisainfo: 19-
1044MAX
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
-
Pidurikettajämedus [mm]: 25,
2 - Välisläbimõõt [mm]: 312
-
Kaal (kg): 8,
506 -
Kõrgus (mm): 49,
8 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 22
-
Ava läbimõõt kuni [mm]: 15,
5 - Nimetus: ALT 127945FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KJ,
1KY - Outer Diameter [mm]: 310
- Brake Disc Thickness [mm]: 22
- Brake Disc Type: Externally Vented
- Minimum thickness [mm]: 20
- Height [mm]: 48.5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.9145.11
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZE,
1ZJ - Kogus pakendis: 2
- Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 7.3
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355128001
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- PR-numbri jaoks: 1KY
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 310
- Hub Diameter [mm]: 150
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48.5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Replace in pairs only:
- Surface: Coated
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
-
Brake Disc Type: slotted,
solid - Brake Disc Thickness [mm]: 10
- Number of Holes: 9
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48.3
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 272
- Surface: Coated
- Minimum thickness [mm]: 8
- Nimetus: BR 08.B413.75
- Tootja: BREMBO
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZE,
1ZJ - Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZF,
1ZH - Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 24
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 21
- Height [mm]: 49.6
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
- Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 7.3
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355109581
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Kõrgus (mm): 50
- Välisläbimõõt [mm]: 312
- Tootja: FAST
- PR-numbri jaoks: 1ZK
- Fitting Position: Front Axle
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: Vented
- Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
- kombineeritud PR-numbrile: 1KJ+1KZ
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 48.3
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 310
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- PR-numbri jaoks: 1ZE
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Bore Diameter [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 0010 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- PR-numbri jaoks: 1ZK
- Tunnussuurus: DP1010.11.0433
- Veljeaukude hulk: 5
- Installatsiooni pool: Esisild
-
Kõrgus (mm): 49,
7 - Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Miinimumjämedus (mm): 22
- Välisläbimõõt [mm]: 312
- Aukude arv: 4
- Tsentri läbimõõt (mm): 65
- Aukudearv 1: 1
- Tootja: DRIVE
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Height [mm]: 49.7
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Number of bores: 5
- Outer Diameter [mm]: 312
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Nimetus: SK VKBD80006V1
- Tootja: SKF
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZF,
1ZH - Kogus pakendis: 2
- Brake Disc Type: Externally Vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 24
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 21
- Weight [kg]: 6.6
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- PR-numbri jaoks: 1ZE
- Fitting Position: Front Axle
-
Brake Disc Type: Vented,
slotted/ perforated - Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.5
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Minimum thickness [mm]: 22
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Kontrolltähistus: R90 Homologated
- Kõrgus (mm): 50
-
Kaal (kg): 15,
35 - Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Miinimumjämedus (mm): 22
- Välisläbimõõt [mm]: 288
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Väändejõud [Nm]: 120
- Ava Ø (mm): 112
- Pealispind: kaetud
- Pidurisüsteem: ATE
- Konteineri tüüp: Sahtel
- Hulgaühik: Komplekt
- Piirangutega toode/piirangu info 2: koos kruvidega
- Versioon: JC
- pakendi pikkus [cm]: 30
- pakendi laius [cm]: 30
- pakendi kõrgus [cm]: 12
- Tootja: JURID
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KY
- Brake Disc Type: Externally Vented
- Outer Diameter [mm]: 310
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48.5
- Minimum thickness [mm]: 20
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 169.4
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 7
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355128451
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- PR-numbri jaoks: 1ZE
- Fitting Position: Front Axle
- Outer Diameter [mm]: 288
- Height [mm]: 49.8
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: Vented
- Surface: Zink flake coated
-
Machining: High-
carbon -
Supplementary Article/Info 2: with bolts/
screws - Quality: PREMIUM
- Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 30.8
- Packaging width [cm]: 30.8
- Packaging height [cm]: 12.7
- Weight [kg]: 7.3
- Nimetus: PIDURIKETAS
- Tootja: TEX
- Lisainfo: 92120805
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Kogus pakendis: 2
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.9772.11
- Kvaliteediklass: Q
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KE
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Brake Disc Thickness [mm]: 10
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 272
- Surface: Coated
- Minimum thickness [mm]: 8.5
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 08.B413.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Number of Holes: 9
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 22
-
Thread Size: 15,
4 - Bolt Hole Circle Ø [mm]: 112
- Colour: black
- Surface: Painted
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E190R-
02 C0176/ 0613 - Nimetus: PIDURIKETAS
- Tootja: TRW
- Kogus pakendis: 2
SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KY
- Kogus pakendis: 2
- Brake Disc Type: Externally Vented
- Outer Diameter [mm]: 310
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48.5
- Minimum thickness [mm]: 20
- Surface: Coated
- Inner Diameter [mm]: 169.4
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 32.8
- Packaging width [cm]: 32.8
- Packaging height [cm]: 12.5
- Weight [kg]: 7
- Nimetus: PIDURIKETAS
- Tootja: TEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- PR-numbri jaoks: 1KE
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 9.7
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Bore Diameter [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- PR-numbri jaoks: 1ZK
- Fitting Position: Front Axle
-
Brake Disc Type: Vented,
slotted/ perforated - Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.9
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Minimum thickness [mm]: 22
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
-
Brake Disc Type: internally vented,
slotted - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.9145.75
- Kvaliteediklass: Q
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Tagasild
- Pidurisuurus: 15"
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 253
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 8
- Weight [kg]: 3.5
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- PR-numbri jaoks: 1ZK
- Kogus pakendis: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Height [mm]: 49.7
-
Machining: High-
carbon - Centering Diameter [mm]: 65
- Surface: Coated
- Minimum thickness [mm]: 22
-
Hole Arrangement/Number: 5/
10 - Tootja: OPTIMAL ZAWIESZENIE
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- PR-numbri jaoks: 1ZK
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 146
- Bore Diameter [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 1001 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- PR-numbri jaoks: 1ZK
- Fitting Position: Front Axle
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: Vented
- Surface: Zink flake coated
-
Machining: High-
carbon -
Supplementary Article/Info 2: with bolts/
screws - Quality: PREMIUM
- Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Kogus pakendis: 2
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 32.8
- Packaging width [cm]: 32.8
- Packaging height [cm]: 12.5
- Weight [kg]: 8.6
- Nimetus: PIDURIKETAS
- Tootja: TEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Kontrolltähistus: R90 Homologated
- Kõrgus (mm): 50
-
Kaal (kg): 8,
94 - Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Miinimumjämedus (mm): 23
- Välisläbimõõt [mm]: 312
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Väändejõud [Nm]: 120
- Ava Ø (mm): 112
- Pealispind: kaetud
- Pidurisüsteem: ATE
- Konteineri tüüp: Sahtel
- Hulgaühik: Tükk
- Piirangutega toode/piirangu info 2: koos kruvidega
- Versioon: JC
- pakendi pikkus [cm]: 33
- pakendi laius [cm]: 33
-
pakendi kõrgus [cm]: 6,
7 - Tootja: JURID
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
-
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Surface: Coated
- Minimum thickness [mm]: 22.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 09.9145.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
-
Brake Disc Type: internally vented,
slotted - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.9772.75
- Kogus pakendis: 2
- Kvaliteediklass: Q
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LD,
1LJ - Kogus pakendis: 2
- Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 27
- Weight [kg]: 10.7
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZA
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 306
- Brake Disc Thickness [mm]: 26
- Height [mm]: 49.7
- Minimum thickness [mm]: 24
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 145
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.4
- Weight [kg]: 8.6
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355134611
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LD
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49.6
- Minimum thickness [mm]: 27
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 145
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 10.8
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355129241
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZA
- Kogus pakendis: 2
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 306
- Brake Disc Thickness [mm]: 26
- Height [mm]: 49.7
- Minimum thickness [mm]: 24
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 145
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.4
- Packaging length [cm]: 32.8
- Packaging width [cm]: 32.8
- Packaging height [cm]: 12.5
- Weight [kg]: 8.6
- Tootja: TEXTAR TARCZE HAMULCOWE
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LD
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: Vented
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Surface: Coated
-
Machining: High-
carbon -
Supplementary Article/Info 2: with bolts/
screws -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.3
- Nimetus: PIDURIKETAS
- Tootja: BOS
- Lisainfo: 0986479C90 BOSCH
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Kogus pakendis: 2
-
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 09.9772.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZA,
1ZK - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZE,
1ZJ - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
slotted -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LD
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49.6
- Minimum thickness [mm]: 27
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 145
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 35.8
- Packaging width [cm]: 35.8
- Packaging height [cm]: 8.5
- Weight [kg]: 10.8
- Nimetus: PIDURIKETAS
- Tootja: TEX
- Kogus pakendis: 2
- Kvaliteediklass: PJ
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LD,
1LJ - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 27
- Weight [kg]: 10.7
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZA,
1ZK - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
slotted -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: esisild paremal
-
PR-numbri jaoks: 1LD,
1LJ -
Brake Disc Type: internally vented,
slotted -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- paired article number: 600.3243.54
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 27
- Weight [kg]: 10.7
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LD,
1LJ -
Brake Disc Type: internally vented,
Perforated, two- part brake disc -
Quality: Alu-
Topf schwimmend, Alu hub floating -
Machining: Alloyed/
High- carbon - Surface: Coated
- Outer Diameter [mm]: 340
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 27
- Weight [kg]: 9.7
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
-
Lisainfo: 600-
3262- 70
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog