• Fitting Position: Front Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fabrication Number: ZTT-PL-007B

Fitting Position: Rear Axle, inner, Left, Right, Lower, Front, Front Axle, behind the axle, Upper

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Material: Rubber/Metal
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36, 43
• Manufacturer: MERTZ

• Fitting Position: Lower Front Axle, Lower
• Block Separation:
• Manufacturer: GSP

• Fitting Position: Front Axle, both sides, Lower, Front
• Manufacturer: DELPHI
• Name: DE TD332W

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
OPEL ASTRA II/ZAFIRA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL ASTRA II/ZAFIRA
(kvaliteediklass: PJ)"

• Fitting Position: Front, Lower, Front Axle Right, Front Axle Left
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Name: Puks - K„„ndmik OPEL P. ASTRA G
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
OPEL ASCONA C
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL ASCONA C
(kvaliteediklass: PJ)"

• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36, 43
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.132
• Name: Puks - K„„ndmik OPEL P. ASTRA G
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 35.7
• Length [mm]: 60
• paired article number: 270225
• Weight [kg]: 0.15
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Front Axle, both sides, Front, Lower
• Manufacturer: TRW
• Additional information: JBU137 TRW
• Lisainfo: JBU137 TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Upper, Rear Axle Lower
• Manufacturer: GSP

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Height [mm]: 60
• Name: ALT 82223AL
• Manufacturer: ALTE AUTOMOTIVE

• Width [mm]: 60
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36.5, 43
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.178
• Manufacturer: SWAG
• Name: SW 40 60 0018

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, Lower, Front Axle Right, Front Axle Left
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Name: Puks - K„„ndmik OPEL P. ASTRA G
• Manufacturer: MAX

• Fitting Position: Rear Axle, inner, Upper, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 35
• Thickness 1 [mm]: 89
• Manufacturer: DELPHI
• Name: DE TD663W

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35.5
• Width [mm]: 60
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Rear
• Overall Length [mm]: 89
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35
• Control/Trailing Arm Type: Trailing Arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: both sides, Lower Front Axle, Front
• Required quantity: 2
• Name: Puks - K„„ndmik OPEL P. ASTRA G
• Manufacturer: TED

• Fitting Position: Rear Axle, Upper, both sides
• Outer Diameter [mm]: 35
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik OPEL T. VECTRA
• Manufacturer: MAX

• Fitting Position: Rear Axle, Upper
• Manufacturer: GSP

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik OPEL P. ASTRA G/ZA
• Manufacturer: MEY

• Fitting Position: Front Axle, Front, both sides
• Mounting Type: Rubber Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: FAST

• Fitting Position: Front Axle, both sides, Front, Lower
• Name:
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear
• Width [mm]: 52
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Manufacturer: MERTZ

• Fitting Position: Rear Axle, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35
• Width [mm]: 89
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829005910

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear
• Manufacturer: JP GROUP
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Fitting Position: Rear Axle, Lower, both sides, Upper
• Width [mm]: 52
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Outer Diameter 1 [mm]: 35
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 89
• Manufacturer: BGA

• Width [mm]: 52
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Fitting Position: Rear Axle, Rear
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle, Lower, in front of axle
• Construction Year from: 01.2000
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 55
• Manufacturer: DELPHI
• Name: DE TD527W

• Fitting Position: Rear Axle, Upper, both sides
• Outer Diameter [mm]: 35.35
• Inner Diameter [mm]: 12.15
• Length [mm]: 42.5
• Name: Puks - K„„ndmik OPEL T. VECTRA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.32
• Name: DY 29-24061
• Manufacturer: DYS

• Fitting Position: Rear Axle, outer, both sides, Lower, Upper
• Manufacturer: DELPHI
• Name: DE TD328W

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle, Front
• Mounting Type: Rubber-Metal Mount
• Axle alignment required after fitting:
• Weight [kg]: 0.334
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2010
• Fitting Position: both sides, Rear
• Quality: OE Performance
• Colour: silver
• Weight [g]: 303
• Manufacturer: GATES PASKI PRZEWODY

• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60
• Length [mm]: 55.5
• paired article number: 271107
• Weight [kg]: 0.29
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, outer

• Width [mm]: 52
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Fitting Position: Rear Axle, Rear
• Weight [kg]: 0.297
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 52
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Fitting Position: Rear Axle, Rear
• Weight [kg]: 0.297
• Name: Puks - K„„ndmik OPEL T. WAHLIWA
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 12
• Axle alignment required after fitting:
• Length [mm]: 52
• Outer Diameter [mm]: 45.2
• Weight [kg]: 0.314
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 22
• Height [mm]: 52
• Name: ALT 81544AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 52
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik OPEL T. WAHLIWA
• Manufacturer: MEY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
OPEL VECTRA 96-/99-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL VECTRA 96-/99-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Quantity per axle: 4
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear
• Inner Diameter [mm]: 19
• Name: Puks
• Manufacturer: MAX

• Fitting Position: Front Axle
• Control/Trailing Arm Type: for control arm
• Weight [g]: 954
• Name: IM 1839
• Manufacturer: ORIGINAL IMPERIUM

• Construction Year from: 08.2002
• Inner Diameter [mm]: 19.2
• Outer Diameter [mm]: 78
• Length [mm]: 66.6
• Mounting Type: Hydro Mount
• paired article number: 270788
• Weight [kg]: 0.82
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Construction Year to: 07.2002
• Inner Diameter [mm]: 19.2
• Outer Diameter [mm]: 78
• Length [mm]: 100
• Mounting Type: Hydro Mount
• paired article number: 270787
• Weight [kg]: 0.94
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Right, Front Axle Left, Lower

• Construction Year from: 01.2002
• Length [mm]: 100
• Width [mm]: 49
• Thickness [mm]: 67
• Inner Diameter [mm]: 20
• Outer Diameter [mm]: 77
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 0.957
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik SAAB P. 9-5 02-10 LE/PR TYLNA HYDRAULICZNA