• Length [mm]: 50
• Housing Colour: blue
• Spanner Size: 19
• Manufacturer: KAMOKA

• Number of pins: 2
• Socket colour: light blue
• Connector Shape: rectangular
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Thread Size: M12x1,5
• Length [mm]: 51
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0124
• Additional information: 21-0124

• Cable Length [mm]: 22
• Number of pins: 1
• Connecting thread: 1/8'' x 27 NPT
• Manufacturer: ERA

• Engine Code: B202S
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

Manufacturer: FAE

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Construction Year from: 08.1991
• Thread Size: 1/8x27 NPTF
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: B202S
• Cable Length [mm]: 970
• Sensor Type: Passive sensor
• for OE number: 93232413
• Manufacturer: KAMOKA

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: B202S
• Sensor Type: NTC Sensor
• Thread Size: 1/8"X27 NPTF
• Number of pins: 1
• Thread Type: with tapered thread
• Manufacturer: MEYLE

• Engine Code: B202S
• Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Length [mm]: 50.7
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Length [mm]: 50.7
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Lisainfo: 40 91 7695 SWA
• Additional information: 40 91 7695 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B202S
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 302
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: blue
• Manufacturer Restriction: Bosch
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M12x1,5
• Housing Colour: blue
• Manufacturer: FAE

• Engine Code: B202S
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: B202S
• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Engine Code: B202S
• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Manufacturer: ERA

• Thread Size: M12x1.5
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: B202S
• Material: Plastic
• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 2
• Alternative Repair Kit: 550301
• Manufacturer: ERA

• Engine Code: B202S
• Number of pins: 2
• Weight [kg]: 0.05
• Manufacturer: ERA

• Engine Code: B202S
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Construction Year from: 09.1991
• Construction Year to: 08.1993
• Manufacturer Restriction: Bosch
• Manufacturer: BOSCH
• Name: BS 0280130026

• Engine Code: B202S
• Length [mm]: 1,015
• Weight [kg]: 0.106
• Required quantity: 1
• Supplementary Article/Info 2: for crankshaft, with seal ring, with cable
• Resistor [Ohm]: 550
• Colour: black
• Operating Mode: Electric
• Cable Length [mm]: 940
• Sensor Type: Passive sensor, Inductive Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Connector Shape: rectangular
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B202S
• Cable Length [mm]: 970
• Number of pins: 3
• Weight [kg]: 0.1
• Resistor [Ohm]: 550
• Operating Mode: Electric
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: B202S
• Number of connectors: 2
• Weight [kg]: 0.054
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Construction Year to: 06.1993
• Engine Code: B202S
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.12
• Manufacturer: VALEO
• Name: VA 254028

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Construction Year from: 09.1991
• Construction Year to: 08.1993
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 1,270
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 09.1991
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Manufacturer Restriction: Bosch
• Cable Length [mm]: 1
• Manufacturer: DELPHI

• Length [mm]: 1,215
• Number of circuits: 3
• Resistor [Ohm]: 4.5
• Conductor Number: 3
• Cable Length [mm]: 1,215
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM078

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 1,250
• Number of circuits: 3
• Manufacturer: ERA

• Number of circuits: 3
• Overall Length [mm]: 1,236
• Lambda Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Regulating Probe
• Construction Year from: 09.1991
• Construction Year to: 08.1993
• Voltage [V]: 12
• Length [mm]: 1,215
• Number of circuits: 3
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV066
• Manufacturer: ESEN SKV

• Construction Year from: 09.1991
• Construction Year to: 08.1993
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV546

• Construction Year from: 09.1991
• Construction Year to: 08.1993
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Manufacturer Restriction: Bosch
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.1991
• Construction Year to: 08.1993
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Manufacturer Restriction: Bosch
• Number of circuits: 3
• Overall Length [mm]: 1,236
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 100,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• for OE number: 75 01 612
• Weight [kg]: 0.025
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B202S
• Manufacturer Restriction: Bosch
• Distributor Number: 8857617
• Name: ANDUR,SššTEIMPULSS
• Manufacturer: EPS