• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Fabrication Number: ECT-RE-006
• Manufacturer: NTY
• Name: NTY ECT-RE-006

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Pressure [bar]: 0.2
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Combi Switch Function: Normally Closed Contact
• Manufacturer: ERA

• Connector Shape: angular
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ECP-RE-003
• Manufacturer: NTY

• Switch Pressure [bar]: 0.2
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Thread Size: M14 x 1,5
• Switch Pressure [bar]: 0.5
• Spanner Size: 21
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for model code: Symbol
• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Pistiku värv: must
• OE-numbri jaoks: 226309418R
• Piirangutega toode/piirangu info 2: koos osadega
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Manufacturer: NISSENS
• Name: NI 207000

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Transmission Type: Automatic Transmission
• Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 9118368
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• for OE number: 51271207038
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Pressure [bar]: 0.15
• Thread Size: M14x1.5
• Spanner Size: 0
• Number of pins: 1
• Name: DE SW90041
• Manufacturer: DELPHI

• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Construction Year to: 03.2013
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Manufacturer: VERNET
• Additional information: AS0006 VERNET
• Lisainfo: AS0006 VERNET

• for model code: Thalia
• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 3
• Pistiku värv: must
• Võtmekaugus: 21
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 226306024R
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 250
• Manufacturer: VALEO
• Name: VA 254010

• alternatively:
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 250
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Number of mounting bores: 2
• Assy./disassy. by qualified personnel required!:
• Name: CZUJNIK POO½ENIA WAU KORB. RENAULT KANGOO 01-
• Manufacturer: HEL

• Construction Year to: 12.2012
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
MEGANE I (BA0/1/), 0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MEGANE I (BA0/1/), 0
(kvaliteediklass: PJ)"

• for model code: Black Plug
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV535
• Manufacturer: ESEN SKV

• Spanner Size: 21 mm
• Sensor Type: NTC Sensor
• Number of pins: 3
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Connector Shape: round
• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Voltage [V]: 12
• Thread Type: with metric thread
• Pressure [bar]: 0.2
• Combi Switch Function: Normally Closed Contact
• Supplementary Article/Supplementary Info: with gaskets/seals
• Thread Size: M14x1,5
• Colour: green
• Spanner Size: 21
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL009600051
• Manufacturer: HELLA

• Housing Colour: black
• Number of pins: 3
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Manufacturer: DELPHI

• Construction Year from: 10.2008
• Number of pins: 2
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Quality: OE EQUIVALENT
• for OE number: 064848160010
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Pressure [bar]: 0.5
• Combi Switch Function: Normally Closed Contact
• Thread Size: M14x1,5
• Colour: grey
• Spanner Size: 21
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL003259741
• Manufacturer: HELLA

• for model code: Black Plug
• alternatively:
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
MEGANE I (BA0/1/), 0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MEGANE I (BA0/1/), 0
(kvaliteediklass: PJ)"

• Supplementary Article/Info 2: with cable
• Length [mm]: 230
• Height [mm]: 24
• Resistor [Ohm]: 250
• Number of connectors: 2
• Manufacturer: VERNET

• Resistor [Ohm]: 250
• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Alternative Repair Kit: 550051
• Manufacturer: ERA

• Connector Shape: angular
• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: NRF

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 3
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S21
• Keermemõõt: M12*1,5
• Name: NI 207001
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Construction Year from: 10.2008
• Manufacturer: VALEO

• Voltage [V]: 12
• Resistor [Ohm]: 290
• for OE number: 82 00 647 554, 82 00 468 645
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable, without vehicle-specific adaptor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Height [mm]: 18
• Resistor [Ohm]: 200
• Number of connectors: 2
• Manufacturer: VERNET

• Construction Year from: 10.2008
• Resistor [Ohm]: 230
• Sensor Type: Inductive Sensor
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Housing Colour: blue
• Article number of recommended accessories: 663033
• Alternative Repair Kit: 550537
• Rated Voltage [V]: 12
• Manufacturer: ERA

• Number of mounting bores: 2
• Voltage [V]: 12
• Resistor [Ohm]: 290
• contains more articles than the OE kit (art. no.): 6PU 009 163-851
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PU009163861
• Manufacturer: HELLA

Supplementary Article/Info 2: with vehicle-specific adaptor, with technical documentation Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M12x1,5
• Spanner Size: 21
• Sensor Type: NTC Sensor
• Number of pins: 3
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107131

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Supplementary Info: with fastening/mounting material
• Number of pins: 4
• Mounting Type: Clamped
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309551
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Alternative Repair Kit: 550785
• Manufacturer: ERA

• Length [mm]: 445
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-RE-000
• Manufacturer: NTY
• Name: NTY ESL-RE-000

• Construction Year from: 10.2008
• Construction Year to: 12.2013
• Engine Code: K4M.6.70,K4M.6.74, K4M.6.77,K4M.7.44, K4M.7.45
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Name: Andur, v„ntvoll
• Manufacturer: VAL

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 12.2012
• Thread Size: M12 x 1,5
• Spanner Size: 21
• Number of pins: 3
• Colour Coding: black
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle type: Symbol, Thalia
• Block Separation:
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

Technical Information: The supplied plug with wires is only used for older models and can only be identified if needed when old sensor is removed

• Engine Code: K4M 743
• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 2206000Q0A
• Manufacturer: MEAT&DORIA

• Engine Code: K4M 670, K4M 674, K4M 730, K4M 744
• Number of pins: 2
• Colour: black
• Manufacturer: VDO

• Thread Size: M12x1.25
• Spanner Size: 24
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: FAST

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Engine Code: K4M 734
• Number of pins: 2
• Colour: black
• Manufacturer: VDO

• Construction Year from: 10.2008
• Number of pins: 2
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• for OE number: 2375000Q0H
• Manufacturer: MEAT & DORIA

• Construction Year to: 12.2012
• Block Separation:
• Oxygen Sensor: Diagnostic Probe, Heated
• Length [mm]: 470
• Number of circuits: 4
• Name: Lambda andur
• Manufacturer: MAX

Fitting Position: Front, after catalytic converter, before catalytic converter

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Piirangutega toode/piirangu info 2: ilma kaablita
• Takistus [oom]: 230
• Manufacturer: VALEO

• Engine Code: K4M 745
• Colour: chrome/black
• Number of pins: 2
• Manufacturer: VDO

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Engine Code: K4M674
• Block Separation:
• Cable Length [mm]: 460
• Manufacturer: DELPHI
• Name: DE ES20656-12B1

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Planar Sensor, Heated Fitting Position: after catalytic converter, before catalytic converter

• Engine Code: K4M 670, K4M 674, K4M 730, K4M 744
• Colour: chrome/black
• Number of pins: 2
• Manufacturer: VDO

• Transmission Type: Manual Transmission
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 470
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year from: 10.2008
• Construction Year to: 06.2014
• Oxygen Sensor: Regulating Sensor, Finger-type Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 10.2008
• Construction Year to: 06.2014
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Construction Year from: 10.2008
• Construction Year to: 06.2014
• Length [mm]: 560
• Technical Information Number: Universal 77015
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 330
• Quality: OE EQUIVALENT
• for OE number: 00001628SW
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2012
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Engine Code: K4M670
• Vehicle type: Thalia
• Cable Length [mm]: 395
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: K4M670
• Block Separation:
• Cable Length [mm]: 470
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Planar Sensor, Heated Fitting Position: after catalytic converter, before catalytic converter Additional information: "Tootja: DELPHI
TWINGO (C06/), 03.93
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
TWINGO (C06/), 03.93
(kvaliteediklass: PJ)"

• Block Separation:
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Planar Sensor, Heated Fitting Position: before catalytic converter, after catalytic converter Additional information: "Tootja: DELPHI
MEGANE II (BM0/1/, C
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MEGANE II (BM0/1/, C
(kvaliteediklass: PJ)"

• Engine Code: K4M 743
• Oxygen Sensor: Regulating Sensor
• Ülekandeliinide arv: 4
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Name: LAMBDA ANDUR
• Manufacturer: NTK

• Length [mm]: 470
• Resistor [Ohm]: 9
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 470
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 10.2008
• Construction Year to: 06.2014
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 408
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 580
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135326
• Manufacturer: HITACHI

• Construction Year from: 10.2008
• Construction Year to: 06.2014
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 440
• Manufacturer: DELPHI
• Name: DE ES10793-12B1

• Construction Year from: 10.2008
• Construction Year to: 12.2013
• Engine Code: K4M.6.70,K4M.6.74, K4M.6.77,K4M.7.44, K4M.7.45
• Name: DETONATSIOONIANDUR
• Manufacturer: VAL

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 10.2008
• Construction Year to: 12.2013
• Engine Code: K4M.6.70
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 300
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.13
• Name: VA 368065
• Manufacturer: VALEO

• Construction Year from: 10.2008
• Construction Year to: 06.2014
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 480
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.2008
• Construction Year to: 12.2013
• Engine Code: K4M.6.77,K4M.7.44, K4M.7.45
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.13
• Name: VA 368040
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA