• Name: Radiator
• Quality class: P

Lisainfo: KUBISTAR (kvaliteediklass P)

• Name: Radiator
• Quality class: P

Lisainfo: CLIO II 98- (kvaliteediklass P)

• Vehicle type: Symbol, Thalia
• Vehicle Equipment: for vehicles without air conditioning
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 378
• Core Width [mm]: 430
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• for OE number: 6001546190
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• for model code: Symbol, Thalia
• Vehicle Equipment: for vehicles without air conditioning
• Block Separation:
• Vehicle type: LU1W
• Material: Aluminium
• Core Length [mm]: 430
• Core Width [mm]: 378
• Core Depth [mm]: 23
• for OE number: 2140000QAZ
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 425*358*23
• Additional information: 425*358*23

• Name: Radiator
• Quality class: ZJ

Lisainfo: CLIO II 98- (kvaliteediklass ZJ)

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 24
• Core Length [mm]: 430
• Core Width [mm]: 378
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles without air conditioning
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 378
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Vehicle Equipment: for vehicles without air conditioning
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 378
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without top, without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 639371
• Lisainfo: DACIA LOGAN I (04-) 1.4 i
• Additional information: DACIA LOGAN I (04-) 1.4 i

• Vehicle Equipment: for vehicles without air conditioning
• Heating/Cooling: without thermal switch connector
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 378
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Core Length [mm]: 430
• Core Width [mm]: 349
• Core Depth [mm]: 23
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 23
• Core Length [mm]: 480
• Core Width [mm]: 413
• Manufacturer: KAMOKA

• Core Length [mm]: 480
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 042-017-0037

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with air conditioning
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 480
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Core Depth [mm]: 16
• Core Length [mm]: 425
• Core Width [mm]: 358
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Name: Radiator
• Quality class: PJ

Lisainfo: KUBISTAR (kvaliteediklass PJ) Additional information: KUBISTAR (kvaliteediklass PJ)

• Name: Radiator
• Quality class: ZJ

Lisainfo: "Tootja: RNBC
CLIO II 98-
(kvaliteediklass: ZJ)"

• Name: Radiator
• Quality class: ZJ

Lisainfo: CLIO II 98- (kvaliteediklass ZJ)

• Core Length [mm]: 425
• Core Width [mm]: 358
• Core Depth [mm]: 16
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 63.5
• Packaging width [cm]: 44.5
• Packaging height [cm]: 11
• Weight [kg]: 1.822
• Manufacturer: AKSDASIS

• Core Length [mm]: 480
• Core Width [mm]: 402
• Core Depth [mm]: 27
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 62
• Packaging width [cm]: 50
• Packaging height [cm]: 12
• Weight [kg]: 2.54
• Manufacturer: AKSDASIS

• Vehicle type: Symbol, Thalia
• Vehicle Equipment: for vehicles with air conditioning
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 480
• Core Depth [mm]: 34
• Radiator type: Mechanically jointed cooling fins
• Name: Radiaator,mootorijahutus
• Manufacturer: MAX

• for model code: Symbol, Thalia
• Vehicle Equipment: for vehicles with air conditioning
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 480
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Radiator type: Mechanically jointed cooling fins
• Manufacturer: NRF
• Lisainfo: 480*402*27
• Additional information: 480*402*27

• Vehicle type: Symbol, Thalia
• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 480
• Core Depth [mm]: 26
• Radiator type: Mechanically jointed cooling fins
• Name: Radiaator,mootorijahutus
• Manufacturer: MAX

• Core Depth [mm]: 27
• Core Length [mm]: 480
• Core Width [mm]: 414
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Name: Radiator
• Quality class: PJ

Lisainfo: CLIO II 98- (kvaliteediklass PJ) Additional information: CLIO II 98- (kvaliteediklass PJ)

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 23
• Core Length [mm]: 480
• Core Width [mm]: 414
• Manufacturer: KAMOKA

• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 480
• Core Width [mm]: 415
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 63809
• Lisainfo: DACIA LOGAN I (04-) 1.0 i 16V
• Additional information: DACIA LOGAN I (04-) 1.0 i 16V

• Core Length [mm]: 428
• Core Width [mm]: 378
• Core Depth [mm]: 28
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 63.5
• Packaging width [cm]: 44.5
• Packaging height [cm]: 11
• Weight [kg]: 1.82
• Manufacturer: AKSDASIS

• Vehicle Equipment: for vehicles without air conditioning
• for type code: LU1W, LU24/LU25
• Core Width [mm]: 430
• Core Length [mm]: 378
• Core Depth [mm]: 23
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: with coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 2.97
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: VAL

• Vehicle Equipment: for vehicles with air conditioning
• Block Separation:
• for model code: LU1W/LU24
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 480
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Vehicle Equipment: for vehicles with air conditioning
• Block Separation:
• for model code: LU1W/LU24
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 480
• Core Width [mm]: 415
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Lisainfo: RENAULT THALIA I (99-) 1.0 i 16V
• Additional information: RENAULT THALIA I (99-) 1.0 i 16V

• Radiator type: Mechanically jointed cooling fins
• Core Depth [mm]: 23
• Core Length [mm]: 378
• Core Width [mm]: 430
• Material: Aluminium
• Manufacturer: FAST

• Vehicle Equipment: for vehicles with air conditioning
• for type code: LU1W/LU24
• Core Width [mm]: 415
• Core Length [mm]: 480
• Core Depth [mm]: 23
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: without coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 3.02
• Manufacturer: VALEO

• Vehicle Equipment: for vehicles with air conditioning
• for model code: LU1W/LU24
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 481
• Core Width [mm]: 414
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without top, without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic