• Installatsiooni pool: esisild paremal
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Kolvi läbimõõt [mm]: 48
• pidurikettajämedusele (mm): 28
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZP-PL-017
• paaris tootenumbrid: HZP-PL-016

• Installatsiooni pool: Tagasild vasakul
• pidurikettajämedusele (mm): 12
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Kolvi läbimõõt [mm]: 48
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZT-PL-014
• paaris tootenumbrid: HZT-PL-015
• Name: NTY HZT-PL-014
• Manufacturer: NTY

Lisainfo: tagasild, vasak pool
UUS-ilma deposiidita! Additional information: tagasild, vasak pool
UUS-ilma deposiidita!

• Installatsiooni pool: Tagasild paremal
• pidurikettajämedusele (mm): 12
• Kolvi läbimõõt [mm]: 48
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZT-PL-015
• paaris tootenumbrid: HZT-PL-014
• Name: NTY HZT-PL-015
• Manufacturer: NTY

Lisainfo: tagasild, parem pool
UUS-ilma deposiidita! Additional information: tagasild, parem pool
UUS-ilma deposiidita!

• Installatsiooni pool: esisild vasakul
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Kolvi läbimõõt [mm]: 48
• pidurikettajämedusele (mm): 28
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZP-PL-016
• paaris tootenumbrid: HZP-PL-017

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: Brembo
• Versioon: Basic Parts
• Name: FR 248158
• Manufacturer: FRENKIT

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 48
• Pidurisüsteem: Brembo
• Versioon: Basic Parts
• Name: FR 248172
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Tyres: for dual tyres
• Brake System: Brembo
• for brake disc thickness [mm]: 18
• Brake Caliper Type: Brake Caliper (1 piston)
• Läbimõõt [mm]: 60
• Hulk telje kohta: 2
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Tyres: for single tyres
• Brake System: Brembo
• for brake disc thickness [mm]: 12
• Brake Caliper Type: Brake Caliper (1 piston)
• Läbimõõt [mm]: 48
• Hulk telje kohta: 2
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK

• Fitting Position: Front Axle
• Brake System: Brembo
• for brake disc thickness [mm]: 28
• Brake Caliper Type: Brake Caliper (2 pistons)
• Läbimõõt [mm]: 48
• Hulk telje kohta: 2
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK
• Additional information: 114-0005 QB
• Lisainfo: 114-0005 QB

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 48
• Pidurisüsteem: Brembo
• Name: FR 248095
• Manufacturer: FRENKIT

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: Brembo
• Manufacturer: FRENKIT
• Name: FR 248096

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 60
• Pidurisüsteem: BREMBO
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2188

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Tootja piirang: BREMBO
• Kolviläbimõõdule (mm): 48
• Piirangutega toode/piirangu info: kaitsekorgiga
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: BREMBO
• OE-numbri jaoks: 4401100Q0J
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: Brembo
• for brake disc thickness [mm]: 28
• Brake Caliper Type: Brake Caliper (2 pistons)
• Läbimõõt [mm]: 48
• Hulk telje kohta: 2
• Piirangutega toode/piirangu info: koos kolviga
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Tyres: for single tyres
• Brake System: Brembo
• for brake disc thickness [mm]: 12
• Brake Caliper Type: Brake Caliper (1 piston)
• Läbimõõt [mm]: 48
• Hulk telje kohta: 2
• Piirangutega toode/piirangu info: koos kolviga
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: Brembo
• Versioon: Kit+Piston
• Täiskomplekt:
• Name: FR 248809
• Manufacturer: FRENKIT

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 60
• Pidurisüsteem: BREMBO
• Täiskomplekt:
• OE-numbri jaoks: 4401100Q0K
• Name: REMONDIKOMPLEKT,PIDURISADUL
• Manufacturer: AUT
• Additional information: D42571C AUT
• Lisainfo: D42571C AUT

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 48
• Pidurisüsteem: BREMBO
• OE-numbri jaoks: 4419941
• Piirangutega toode/piirangu info: koos kolviga
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: BREMBO
• Täiskomplekt:
• OE-numbri jaoks: 4401100Q0J
• Name: REMONDIKOMPLEKT,PIDURISADUL
• Manufacturer: AUT

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 48
• Pidurisüsteem: Brembo
• Versioon: Kit+Piston
• Täiskomplekt:
• Name: FR 248807
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Tyres: for dual tyres
• Brake System: Brembo
• for brake disc thickness [mm]: 18
• Brake Caliper Type: Brake Caliper (1 piston)
• Läbimõõt [mm]: 60
• Hulk telje kohta: 2
• Piirangutega toode/piirangu info: koos kolviga
• Manufacturer: QBK

Name: ZESTAW NAPR. ZACISKU HAM. NISSAN T. INTERSTAR/NV400 2,3 DCI 11- Z TOCZKIEM

• Fitting Position: Rear Axle
• Tyres: for single tyres
• Brake System: BREMBO
• Kolvi läbimõõt [mm]: 48
• Manufacturer: BREMBO

• Installatsiooni pool: Esisild
• Täiskomplekt:
• Läbimõõt [mm]: 48
• Pidurisüsteem: BREMBO
• OE-numbri jaoks: 4419941
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2155C
• Additional information: D42155C
• Lisainfo: D42155C

• Installatsiooni pool: Tagasild
• Pidurisüsteem: BREMBO
• Läbimõõt [mm]: 60
• Täiskomplekt:
• OE-numbri jaoks: 440115651R
• Versioon: WITH MECHANISM
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: AUT

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: Brembo
• Versioon: Kit+Piston
• Täiskomplekt:
• Name: FR 248813
• Manufacturer: FRENKIT

• Installatsiooni pool: Esisild
• Pidurisüsteem: BREMBO
• Läbimõõt [mm]: 48
• Täiskomplekt:
• Versioon: PISTON KIT+GUIDEPINS
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: AUT

• Installatsiooni pool: Tagasild
• Pidurisüsteem: BREMBO
• Läbimõõt [mm]: 48
• Täiskomplekt:
• OE-numbri jaoks: 4420056
• Versioon: WITH MECHANISM
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: AUT

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 60
• Pidurisüsteem: BRE
• Täiskomplekt:
• Versioon: PISTON KIT+GUIDEPIN
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: AUT

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: BRE
• Täiskomplekt:
• Versioon: PISTON KIT+GUIDEPINS
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-3534S

• Construction Year to: 01.2015
• Installatsiooni pool: Tagasild paremal
• Pidurisüsteem: BREMBO
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Vana detaili tagastus mittevajalik:
• Uus osa:
• Kolvi läbimõõt [mm]: 48
• paaris tootenumbrid: 131-04-085
• pidurikettajämedusele (mm): 12
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: AB 131-04-086
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 01.2015
• Installatsiooni pool: Tagasild vasakul
• Pidurisüsteem: BREMBO
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Vana detaili tagastus mittevajalik:
• Uus osa:
• Kolvi läbimõõt [mm]: 48
• paaris tootenumbrid: 131-04-086
• pidurikettajämedusele (mm): 12
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: AB 131-04-085
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Tootja piirang: BREMBO
• Läbimõõt [mm]: 48
• Name: CFD BA2706
• Manufacturer: DACO

Pidurisadulateostus: Pidurisadul koos integr. seisupiduriga, Pidurisadul (1 kolb)

• Fitting Position: Rear Axle Left
• Tootja piirang: BREMBO
• Läbimõõt [mm]: 48
• Name: CFD BA2705
• Manufacturer: DACO

Pidurisadulateostus: Pidurisadul koos integr. seisupiduriga, Pidurisadul (1 kolb)

• Tyres: for single tyres
• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BREMBO
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 156
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 23SKV993
• Kaal (kg): 3,43
• Pidurikettajämedus [mm]: 12
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• alternatiivne toode: 78SKV824
• Name: CE 23SKV994
• Manufacturer: ESEN SKV

• Tyres: for single tyres
• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BREMBO
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 156
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 23SKV994
• Kaal (kg): 3,43
• Pidurikettajämedus [mm]: 12
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• alternatiivne toode: 78SKV823
• Name: CE 23SKV993
• Manufacturer: ESEN SKV

• Installatsiooni pool: Tagasild vasakul
• pidurikettajämedusele (mm): 18
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Kolvi läbimõõt [mm]: 60
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZT-PL-051
• paaris tootenumbrid: HZT-PL-050

• Installatsiooni pool: Tagasild paremal
• pidurikettajämedusele (mm): 18
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Kolvi läbimõõt [mm]: 60
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZT-PL-050
• paaris tootenumbrid: HZT-PL-051

• Fitting Position: Front Axle Left
• Brake Caliper Type: Floating Caliper, Brake Caliper (2 pistons)
• Brake Caliper Piston Diameter [mm]: 48
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 302
• for brake disc thickness [mm]: 28
• Manufacturer Restriction: BREMBO

• Fitting Position: Front Axle Right
• Brake Caliper Type: Floating Caliper, Brake Caliper (2 pistons)
• Brake Caliper Piston Diameter [mm]: 48
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 302
• for brake disc thickness [mm]: 28
• Manufacturer Restriction: BREMBO

• Construction Year to: 01.2015
• Installatsiooni pool: Tagasild paremal
• Pidurisüsteem: BREMBO
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Vana detaili tagastus mittevajalik:
• Uus osa:
• Kolvi läbimõõt [mm]: 60
• paaris tootenumbrid: 131-04-533
• pidurikettajämedusele (mm): 18
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 01.2015
• Installatsiooni pool: Tagasild vasakul
• Pidurisüsteem: BREMBO
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Vana detaili tagastus mittevajalik:
• Uus osa:
• Kolvi läbimõõt [mm]: 60
• paaris tootenumbrid: 131-04-534
• pidurikettajämedusele (mm): 18
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Tyres: for single tyres
• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BREMBO
• Uus osa:
• Kinnitusaukude vahe (mm): 156
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 3,43
• Pidurikettajämedus [mm]: 12
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY ZACISKI

• Tyres: for single tyres
• Fitting Position: Rear Axle Right
• Brake Caliper Piston Diameter [mm]: 48
• Brake Disc Type: solid
• for brake disc diameter [mm]: 305
• for brake disc thickness [mm]: 12
• Manufacturer Restriction: BREMBO

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Tyres: for single tyres
• Fitting Position: Rear Axle Left
• Brake Caliper Piston Diameter [mm]: 48
• Brake Disc Type: solid
• for brake disc diameter [mm]: 305
• for brake disc thickness [mm]: 12
• Manufacturer Restriction: BREMBO

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Installatsiooni pool: esisild vasakul
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Pidurisüsteem: BREMBO
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 196
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV652
• Kaal (kg): 5,12
• Pidurikettajämedus [mm]: 28
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 45SKV651
• Manufacturer: ESEN SKV

• Installatsiooni pool: esisild paremal
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Pidurisüsteem: BREMBO
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 196
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV651
• Kaal (kg): 5,12
• Pidurikettajämedus [mm]: 28
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 45SKV652
• Manufacturer: ESEN SKV

• Tyres: for single tyres
• Fitting Position: Rear Axle Left
• Brake Caliper Type: Brake Caliper (1 piston)
• Material: Grey Cast Iron
• Supplementary Article/Supplementary Info: without electric motor
• Brake System: BREMBO
• paired article number: JBC0496
• Piston Diameter [mm]: 48
• Distance of mounting bores [mm]: 156
• for brake disc thickness [mm]: 12
• Manufacturer: KAMOKA

• Tyres: for single tyres
• Fitting Position: Rear Axle Right
• Brake Caliper Type: Brake Caliper (1 piston)
• Material: Cast Iron
• Supplementary Article/Supplementary Info: without electric motor
• Brake System: BREMBO
• paired article number: JBC0495
• Piston Diameter [mm]: 48
• Distance of mounting bores [mm]: 156
• for brake disc thickness [mm]: 12
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Supplementary Article/Supplementary Info: without electric motor
• Brake System: BREMBO
• paired article number: JBC1012
• Piston Diameter [mm]: 48
• Distance of mounting bores [mm]: 196
• for brake disc thickness [mm]: 28
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Supplementary Article/Supplementary Info: without electric motor
• Brake System: BREMBO
• paired article number: JBC1011
• Piston Diameter [mm]: 48
• Distance of mounting bores [mm]: 196
• for brake disc thickness [mm]: 28
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Name: CFD BA2743
• Manufacturer: DACO

• Fitting Position: Front Axle Right
• Name: CFD BA2744
• Manufacturer: DACO

• Installatsiooni pool: esisild paremal
• Pidurisüsteem: BREMBO
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Vana detaili tagastus mittevajalik:
• Uus osa:
• Kolvi läbimõõt [mm]: 48
• paaris tootenumbrid: 131-04-509
• pidurikettajämedusele (mm): 28
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Esisild, vasakul, paremal
• Laius (mm): 31,4
• Materjal: Hallmalm
• Pidurisüsteem: BREMBO
• Manufacturer: BREMBO

• Fitting Position: Front Axle Left
• Tootja piirang: BREMBO
• Läbimõõt [mm]: 48
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Right
• Tootja piirang: BREMBO
• Läbimõõt [mm]: 48
• Manufacturer: YSPARTS

• Construction Year from: 02.2015
• Tyres: for single tyres
• Installatsiooni pool: Tagasild, vasakul, paremal
• Laius (mm): 16
• Materjal: Hallmalm
• Pidurisüsteem: BREMBO
• Manufacturer: BREMBO

• Fitting Position: Rear Axle Right
• paired article number: 82-0201
• Material: Cast Iron
• Manufacturer Restriction: BREMBO
• for brake disc thickness [mm]: 12
• Piston Diameter [mm]: 48
• Name: PIDURISADUL
• Manufacturer: MAX

Brake Caliper Type: Brake Caliper (1 piston), Brake Caliper with integrated parking brake Lisainfo: Pidurisadul TAGASILD,  PAREM POOL-UUS TOODE !!! (ilma deposiidita) Additional information: Pidurisadul TAGASILD,  PAREM POOL-UUS TOODE !!! (ilma deposiidita)

• Fitting Position: Rear Axle Left
• paired article number: 82-0202
• Material: Cast Iron
• Manufacturer Restriction: BREMBO
• for brake disc thickness [mm]: 12
• Piston Diameter [mm]: 48
• Name: PIDURISADUL
• Manufacturer: MAX

Brake Caliper Type: Brake Caliper (1 piston), Brake Caliper with integrated parking brake Lisainfo: Pidurisadul TAGASILD,  VASAK POOL-UUS TOODE !!! (ilma deposiidita) Additional information: Pidurisadul TAGASILD,  VASAK POOL-UUS TOODE !!! (ilma deposiidita)

• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Keermemõõt: M10X1
• Pidurisüsteem: BREMBO
• pidurikettajämedusele (mm): 12
• Kinnitusaukude vahe (mm): 156
• Pidurisadula kolvi läbimõõt [mm]: 48
• Manufacturer: JPN

• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Keermemõõt: M10X1
• Pidurisüsteem: BREMBO
• pidurikettajämedusele (mm): 12
• Kinnitusaukude vahe (mm): 156
• Pidurisadula kolvi läbimõõt [mm]: 48
• Manufacturer: JPN

• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Läbimõõt 1/Läbimõõt 2 (mm): 48,0
• Pidurisüsteem: BREMBO
• Manufacturer: YSPARTS

• Fitting Position: Rear Axle Right
• Läbimõõt 1/Läbimõõt 2 (mm): 48,0
• Pidurisüsteem: BREMBO
• Manufacturer: YSPARTS

• paired article number: 82-0524
• Fitting Position: Front Axle Left, in front of axle
• Manufacturer Restriction: BREMBO
• Brake Caliper Type: Floating Caliper, Brake Caliper (2 pistons)
• for brake disc thickness [mm]: 28
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 302
• Piston Diameter [mm]: 48
• Name: Pidurisadul
• Manufacturer: MAX

Lisainfo: Pidurisadul ESISILD, VASAK POOL-UUS TOODE !!! (ilma deposiidita) Additional information: Pidurisadul ESISILD, VASAK POOL-UUS TOODE !!! (ilma deposiidita)

• paired article number: 82-0523
• Fitting Position: Front Axle Right, in front of axle
• Manufacturer Restriction: BREMBO
• Brake Caliper Type: Floating Caliper, Brake Caliper (2 pistons)
• for brake disc thickness [mm]: 28
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 302
• Piston Diameter [mm]: 48
• Name: Pidurisadul
• Manufacturer: MAX

Lisainfo: Pidurisadul ESISILD, PAREM POOL-UUS TOODE !!! (ilma deposiidita) Additional information: Pidurisadul ESISILD, PAREM POOL-UUS TOODE !!! (ilma deposiidita)

• Fitting Position: Rear Axle Left
• paired article number: 82-0200
• Material: Cast Iron
• Manufacturer Restriction: BREMBO
• for brake disc thickness [mm]: 18
• for brake disc diameter [mm]: 302
• Piston Diameter [mm]: 60
• Name: PIDURISADUL
• Manufacturer: MAX

Brake Caliper Type: Brake Caliper (1 piston), Brake Caliper with integrated parking brake Lisainfo: Pidurisadul TAGASILD, VASAK POOL-UUS TOODE !!! (ilma deposiidita)
Kolvi läbimõõt: 60 mm Topelt ratastega autod Additional information: Pidurisadul TAGASILD, VASAK POOL-UUS TOODE !!! (ilma deposiidita)
Kolvi läbimõõt: 60 mm Topelt ratastega autod

• Installatsiooni pool: Tagasild, Tagasild vasakul
• paaris tootenumbrid: GH-453965H
• Kolvi läbimõõt [mm]: 48
• Materjal: Malm
• Pidurisüsteem: BREMBO
• Vana detaili tagastus mittevajalik:
• Manufacturer: AUTO-GH

Pidurisadulateostus: Pidurisadul koos integr. seisupiduriga, Pidurisadul (1 kolb)

• Installatsiooni pool: Tagasild, Tagasild paremal
• paaris tootenumbrid: GH-453965V
• Kolvi läbimõõt [mm]: 48
• Materjal: Malm
• Pidurisüsteem: BREMBO
• Vana detaili tagastus mittevajalik:
• Manufacturer: AUTO-GH

Pidurisadulateostus: Pidurisadul koos integr. seisupiduriga, Pidurisadul (1 kolb)

• Rehvid: Rehvide jaoks
• Installatsiooni pool: Tagasild, paremal
• Pidurisüsteem: BREMBO
• Pidurisadula kolvi läbimõõt [mm]: 48
• Manufacturer: PROFIPOWER

• Rehvid: Rehvide jaoks
• Installatsiooni pool: Tagasild, vasakul
• Pidurisüsteem: BREMBO
• Pidurisadula kolvi läbimõõt [mm]: 48
• Manufacturer: PROFIPOWER

• Installatsiooni pool: esisild paremal
• Pidurisüsteem: BREMBO
• pidurikettajämedusele (mm): 28
• Kolvi läbimõõt [mm]: 48
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle, Rear Axle Right, behind the axle
• Tyres: for single tyres
• paired article number: 2136277
• Manufacturer Restriction: BREMBO
• Piston Diameter [mm]: 48
• for brake disc thickness [mm]: 12
• Brake Disc Type: solid
• for brake disc diameter [mm]: 305
• Material: Cast Iron
• Net weight [kg]: 3.48
• Name: Pidurisadul
• Manufacturer: NK

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Installatsiooni pool: esisild paremal
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Materjal: Hallmalm
• Piirangutega toode/piirangu info 2: koos kinnitusraamiga
• paaris tootenumbrid: FT32141
• Kinnitusaukude vahe (mm): 196
• Ühenduste arv: 1
• pidurikettajämedusele (mm): 28
• Manufacturer: FAST

• New Part:
• Piston Diameter [mm]: 48
• Brake Caliper Type: Brake Caliper with integrated parking brake
• Material: Cast Iron
• Brake Caliper Colour: grey
• Brake System: BREMBO
• Fitting Position: Rear Axle Left
• Supplementary Article/Supplementary Info: without holder
• paired article number: 9298221
• Weight [kg]: 3.49
• Manufacturer: FTE
• Name: VA 9298220

• Construction Year from: 02.2015
• Tyres: for dual tyres
• Installatsiooni pool: Tagasild, vasakul, paremal
• Laius (mm): 22
• Materjal: Hallmalm
• Pidurisüsteem: BREMBO
• Manufacturer: BREMBO

• Fitting Position: Rear Axle, Rear Axle Left, behind the axle
• Tyres: for single tyres
• paired article number: 2136278
• Manufacturer Restriction: BREMBO
• Piston Diameter [mm]: 48
• for brake disc thickness [mm]: 12
• Brake Disc Type: solid
• for brake disc diameter [mm]: 305
• Material: Cast Iron
• Net weight [kg]: 3.63
• Name: Pidurisadul
• Manufacturer: NK