Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Thickness [mm]: 1.5
- Weight [kg]: 0.02
-
Material: Rubber/
Metal - Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
- Supplementary Article/Info 2: for oil drain plug
- Manufacturer: METALCAUCHO
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Weight [kg]: 0.033
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Thickness [mm]: 2
-
Sealing lip material: NBR
(nitrile butadiene rubber) - Gasket Design: Metal Elastomer Gasket
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.02
- Thread Size: 16x150
- Weight [g]: 20
- not for article number: 3778
- Manufacturer: METALCAUCHO
-
Thread Size: M16 x 1,
50 - Length [mm]: 19
- Manufacturer: 3RG
- for OE number: 016393
-
Article number of recommended accessories: V25-
0583 - Length [mm]: 12
-
External Thread [mm]: M16 x 1,
5 - Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Required quantity: 1
- Thread Length [mm]: 12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: engine sided
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
- Weight [kg]: 0.04
- Required quantity: 1
-
Thread Size: M14 x 1,
5 -
External Thread [mm]: M14 x 1,
5 - Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
-
Surface: Zinc-
coated - Thread Length [mm]: 11
- Manufacturer: ACKOJA
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Supplementary Article/Info 2: without seal ring
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 14
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Manufacturer: FAST
- Material: Steel
- Length [mm]: 20
- Thread Length [mm]: 16
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
-
Surface: Zinc-
coated - for OE number: 93198205
- Manufacturer: DELLO AUTOMEGA
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Metal
- for OE number: 77 03 075 348
-
Manufacturer: ENERGY-
NARZÊDZIA WARSZTATOWE
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 14.3
- Outer Diameter [mm]: 24
- Material: Copper
- Thickness [mm]: 1.5
- Packing Type: Blister Pack
- Name: COU 005590S
- Manufacturer: CORTECO
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- Thread Length [mm]: 12
- Thread Pitch [mm]: 1.5
- Weight [kg]: 0.02
-
External Thread [mm]: M16 x 1,
5 -
Surface: Zinc-
coated - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Name: SW 60 10 1250
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Steel
-
Thread Size: M14x1,
5 - Length [mm]: 22
- Screw length below head [mm]: 11
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 17
- Supplementary Article/Supplementary Info: with gaskets
-
Seal Material: Aluminium,
Copper - Inner Diameter 1 [mm]: 14
-
Outer Diameter [mm]: 22,
24 -
Thickness [mm]: 2,
1.5 - Inner Diameter [mm]: 14
- Packing Type: Bag
- Manufacturer: METZGER
- Length [mm]: 21
-
Thread Size: M 14 x 1,
5 x 14 - Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: COT
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks