• Fitting Position: Front Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Number of Holes: 4
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Front Axle
• Construction Year from: 01.1985
• Construction Year to: 06.1987
• Minimum thickness [mm]: 10.5
• Brake Disc Type: solid
• Bore Diameter [mm]: 13.5
• Brake Disc Thickness [mm]: 12
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Inner Diameter [mm]: 129.5
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Outer Diameter [mm]: 238
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Construction Year to: 06.1986
• Brake Disc Type: solid
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Fitting Position: Front Axle
• Centering Diameter [mm]: 61
• Height [mm]: 41
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Minimum thickness [mm]: 10.5
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Construction Year from: 06.1987
• Construction Year to: 11.1989
• Minimum thickness [mm]: 17.7
• Brake Disc Type: Vented
• Bore Diameter [mm]: 12.5
• Brake Disc Thickness [mm]: 20.1
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Inner Diameter [mm]: 128
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Outer Diameter [mm]: 238
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Height [mm]: 41
• Brake Disc Thickness [mm]: 11.9
• Outer Diameter [mm]: 238
• Manufacturer: JPN

• Fitting Position: Front Axle
• Construction Year to: 12.1988
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 41
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 238
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 61
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Height [mm]: 40.8
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10.5
• Number of bores: 2
• Outer Diameter [mm]: 238
• Number of Holes: 4
• Centering Diameter [mm]: 61
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Manufacturer: SKF TARCZE HAM

• Construction Year from: 01.1985
• Construction Year to: 06.1987
• Fitting Position: Front Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41
• Outer Diameter [mm]: 238
• Centering Diameter [mm]: 61
• Brake Disc Thickness [mm]: 12
• Manufacturer: KAMOKA UK£ADY HAMULCOWE
• Quantity per packing unit: 2

• Construction Year from: 01.1985
• Construction Year to: 06.1987
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Brake Disc Type: solid
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 06.1987
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake System: BENDIX
• Number of Holes: 4
• Height [mm]: 41
• Brake Disc Thickness [mm]: 20
• Outer Diameter [mm]: 238
• Centering Diameter [mm]: 61
• Minimum thickness [mm]: 17.7
• Brake Disc Type: internally vented
• Manufacturer: LPR

• Fitting Position: Front Axle
• Construction Year to: 01.1988
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0967/2516
• Surface: Oiled
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10.5
• Centering Diameter [mm]: 61
• Height [mm]: 41
• Name: DE BG2217
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Construction Year to: 01.1988
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 4
• Test Mark: E1 90R-02C0957/2559
• Surface: Oiled
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 20.1
• Minimum thickness [mm]: 17.7
• Centering Diameter [mm]: 61
• Height [mm]: 41
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG2282

• Construction Year from: 01.1985
• Construction Year to: 06.1987
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake System: TRW
• Outer Diameter [mm]: 238
• Height [mm]: 41
• Brake Disc Type: solid
• Minimum thickness [mm]: 10.5
• Centering Diameter [mm]: 61
• Brake Disc Thickness [mm]: 12
• Number of Holes: 4
• Manufacturer: LPR

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Outer Diameter [mm]: 238
• Minimum thickness [mm]: 10.5
• Tightening Torque [Nm]: 90
• Manufacturer: BREMBO
• Name: BR 08.2958.14
• Quality class: Q

• Construction Year from: 06.1987
• Construction Year to: 11.1989
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 20.1
• Brake Disc Type: Vented
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Height [mm]: 41.2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 20.1
• Minimum thickness [mm]: 17.7
• Number of bores: 2
• Outer Diameter [mm]: 238
• Number of Holes: 4
• Centering Diameter [mm]: 61
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Manufacturer: SKF TARCZE HAM

• Brake Disc Type: Vented
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 20
• Centering Diameter [mm]: 61
• Height [mm]: 41
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Fitting Position: Front Axle
• Minimum thickness [mm]: 17.7
• Name: PIDURIKETAS
• Manufacturer: MAX

• Engine Code: F2N 700, F2N 704, F2N 796, F2N 797
• Construction Year to: 06.1987
• Fitting Position: Front Axle
• Outer Diameter [mm]: 237.8
• Brake Disc Thickness [mm]: 11.9
• Minimum thickness [mm]: 10.5
• Height [mm]: 41
• Bolt Hole Circle Ø [mm]: 100
• Brake Disc Type: solid
• Centering Diameter [mm]: 61
• Number of Holes: 6
• Surface: Oiled
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 13
• Name: PIDURIKETAS
• Manufacturer: BOS
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Height [mm]: 40.8
• Minimum thickness [mm]: 10.5
• Surface: Coated
• Inner Diameter [mm]: 129.5
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 61
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Diameter [mm]: 13.5
• Weight [kg]: 3.5
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355101241
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Construction Year from: 01.1985
• Construction Year to: 06.1987
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10.5
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Inner Diameter [mm]: 129.5
• Bore Diameter [mm]: 13.5
• Test Mark: E1 90R-02C0165/1151
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Front Axle
• Construction Year to: 06.1986
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10.5
• Centering Diameter [mm]: 61
• Height [mm]: 41
• Number of Holes: 4
• Thread Size: 12,6
• Bolt Hole Circle Ø [mm]: 100
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0190/0541
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Height [mm]: 41
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 61
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 10.5
• Weight [kg]: 3.51
• Hole Arrangement/Number: 6/4
• Manufacturer: ZIMMERMANN

• Construction Year to: 06.1986
• Quantity per packing unit: 2
• Rim Hole Number: 4
• Fitting Position: Front Axle
• Height [mm]: 41
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 11.9
• Minimum thickness [mm]: 10.5
• Outer Diameter [mm]: 238
• Number of Holes: 2
• Centering Diameter [mm]: 61
• Manufacturer: DRIVE

• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Brake Disc Type: solid
• Fitting Position: Front Axle
• Minimum thickness [mm]: 10.5
• Height [mm]: 40.8
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 61
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 4
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Height [mm]: 40.8
• Minimum thickness [mm]: 10.5
• Surface: Coated
• Inner Diameter [mm]: 129.5
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 61
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Diameter [mm]: 13.5
• Packaging length [cm]: 24.8
• Packaging width [cm]: 24.8
• Packaging height [cm]: 10.5
• Weight [kg]: 3.5
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Height [mm]: 41
• Brake Disc Thickness [mm]: 11.9
• Outer Diameter [mm]: 238
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Height [mm]: 41
• Weight [kg]: 7.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10.6
• Outer Diameter [mm]: 238
• Number of Holes: 4
• Centering Diameter [mm]: 61
• Tightening Torque [Nm]: 90
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 24.5
• Packaging width [cm]: 24.5
• Packaging height [cm]: 10
• Manufacturer: JURID

• Construction Year from: 06.1987
• Construction Year to: 11.1989
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 20.1
• Minimum thickness [mm]: 17.7
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Inner Diameter [mm]: 128
• Bore Diameter [mm]: 12.5
• Test Mark: E1 90R-02C0115/0111
• Name: Piduriketas
• Manufacturer: ATE
• Quality class: Q

• Construction Year from: 10.1986
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Test Mark: R90 Homologated
• Height [mm]: 41
• Weight [kg]: 8.3
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17.7
• Outer Diameter [mm]: 238
• Number of Holes: 4
• Centering Diameter [mm]: 61
• Tightening Torque [Nm]: 85
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 25
• Packaging width [cm]: 25
• Packaging height [cm]: 10
• Manufacturer: JURID

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid, slotted
• Brake Disc Thickness [mm]: 12
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 41
• Centering Diameter [mm]: 61
• Outer Diameter [mm]: 238
• Surface: Coated
• Minimum thickness [mm]: 10.5
• Manufacturer: BREMBO
• Name: BR 08.2958.75
• Quality class: Q

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid, Perforated
• Surface: Coated
• Outer Diameter [mm]: 238
• Brake Disc Thickness [mm]: 12
• Height [mm]: 41
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 61
• Test Mark: KBA 60934
• Minimum thickness [mm]: 10.5
• Weight [kg]: 3.51
• Hole Arrangement/Number: 6/4
• Manufacturer: ZIMMERMANN