• Filter type: In-Line Filter
• Height [mm]: 143
• Outer Diameter 1 [mm]: 55
• Outer Diameter 2 [mm]: 61
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: In-Line Filter
• Height [mm]: 143
• Outer Diameter [mm]: 61
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Housing material: Plastic

Lisainfo: Dacia Logan 04->, Sandero 08->, Solenza 03->, Supernova 00->03, Nissan Kubistar 03->, Primastar 01->, Opel Vivaro 01->, Renault Avantime 01->03, Clio 96->, Espace 96->, Fluence 10->, Kangoo 97->, Laguna 96->, Latitude 11->, Logan 04->, Megane 96->, Extra 96->98, Sandero 07->, Scenic 99->, Grand 04->, Thalia 00->, Twingo 96->, Trafic 01->, Vauxhall Vivaro 01-> Additional information: Dacia Logan 04->, Sandero 08->, Solenza 03->, Supernova 00->03, Nissan Kubistar 03->, Primastar 01->, Opel Vivaro 01->, Renault Avantime 01->03, Clio 96->, Espace 96->, Fluence 10->, Kangoo 97->, Laguna 96->, Latitude 11->, Logan 04->, Megane 96->, Extra 96->98, Sandero 07->, Scenic 99->, Grand 04->, Thalia 00->, Twingo 96->, Trafic 01->, Vauxhall Vivaro 01->

Lisainfo: Brake Pad Set, disc brake

• Construction Year from: 11.2005
• Construction Year to: 12.2008
• Fitting Position: Front Axle
• Brake System: ATE
• Height 1 [mm]: 68.9
• Height 2 [mm]: 66.8
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.3
• Thickness [mm]: 18.3
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Filter type: In-Line Filter
• Length [mm]: 136.4
• Outer Diameter [mm]: 61
• Diameter 1/Diameter 2 [mm]: IN/OUT: 8
• Manufacturer: ASHIKA
• Additional information: ASH30-01-120
• Lisainfo: ASH30-01-120

• Filter type: In-Line Filter
• Height [mm]: 137
• Outer Diameter 1 [mm]: 55
• Outer Diameter 2 [mm]: 59
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Manufacturer: DENCKERMANN FILTRY

• Construction Year to: 10.2009
• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Outer Diameter 1 [mm]: 61
• Height [mm]: 143
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Diameter [mm]: 55
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• for OE number: 1567 81
• Height [mm]: 138
• Fuel Type: Petrol
• Outer Diameter [mm]: 56
• Manufacturer: KAMOKA

• Filter type: In-Line Filter
• Housing material: Plastic
• Height [mm]: 143
• Outer Diameter [mm]: 62
• Pipe Diameter [mm]: 8
• Weight [kg]: 0.07
• Observe service information:
• Name: KšTUSEFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Height [mm]: 144
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 56
• Quality class: PJ
• Name: Fuel filter

• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Height [mm]: 143
• Outer Diameter [mm]: 55
• Manufacturer: FAST

• Filter type: In-Line Filter
• Housing material: Plastic
• Height [mm]: 143
• Outer Diameter [mm]: 62
• Pipe Diameter [mm]: 8
• Weight [kg]: 0.07
• Name: KšTUSEFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Packing Type: Carton
• Packaging length [cm]: 8.6
• Packaging width [cm]: 8.6
• Packaging height [cm]: 12.8
• Name: CH CFF100236
• Manufacturer: CHAMPION

• Engine Code: K4M680, K4M762
• Filter type: In-Line Filter
• Height [mm]: 143
• Outer Diameter [mm]: 61
• Outer Diameter 1 [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Weight [kg]: 0.1
• Manufacturer: VALEO
• Name: VA 587001

• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 61
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Construction Year to: 10.2008
• Engine Code: K4M 764
• Climate Zones: for hot climate zones
• Filter type: In-Line Filter
• Height [mm]: 143
• Outer Diameter [mm]: 61
• Outer Diameter 1 [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Weight [kg]: 0.1
• Manufacturer: VALEO
• Name: VA 587002

• Filter type: In-Line Filter
• Height [mm]: 139
• Outer Diameter [mm]: 62
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Diameter [mm]: 58.8
• Filter type: In-Line Filter
• Height [mm]: 136.5
• Surface: Zinc-coated
• Housing material: Metal
• Name: KšTUSEFILTER
• Manufacturer: MEY
• Lisainfo: 6143230002
• Additional information: 6143230002

• Filter type: In-Line Filter
• Manufacturer: 3RG

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: PROFIPOWER

• Construction Year to: 10.2009
• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 55.4
• Outer Diameter 1 [mm]: 61
• Height [mm]: 143
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: BOSCH
• Name: BS 0450902161

• Filter type: In-Line Filter
• Outer Diameter 1 [mm]: 56
• Outlet Ø [mm]: 8
• Thread Size: 8 mm
• Height [mm]: 138
• Manufacturer: KOLBENSCHMIDT

• Height [mm]: 136.5
• Outer Diameter [mm]: 55
• Outer Diameter 1 [mm]: 62
• Outlet Ø [mm]: 7.9
• Fuel Type: Petrol
• Inlet Ø [mm]: 7.9
• Filter type: In-Line Filter
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: K4M 762
• Diameter [mm]: 61
• Material: Plastic
• Filter type: In-Line Filter
• Height [mm]: 143
• Manufacturer: DELPHI
• Name: DE EFP201

• Filter type: In-Line Filter
• Outer Diameter [mm]: 61
• Height [mm]: 143
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 142
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Packaging height [cm]: 14.5
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Net Weight [g]: 88
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN KL416/1

• Filter type: In-Line Filter
• Height [mm]: 143
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 61
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN
• Lisainfo: WK 6002 MAN
• Additional information: WK 6002 MAN

• Construction Year to: 11.2008
• Filter type: Filter Insert
• Height [mm]: 144
• Outer Diameter [mm]: 56
• Diameter 3 [mm]: 8
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
TWINGO NADWOZIE PEŁN
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
TWINGO NADWOZIE PEŁN
(kvaliteediklass: PJ)"

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 142
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Packaging height [cm]: 14.5
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Net Weight [g]: 88
• Manufacturer: MAHLE KNECHT

• Fitting Position: Rear Axle
• Width [mm]: 87
• Thickness [mm]: 15
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year to: 12.2008
• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 15.8
• Height [mm]: 51.9
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Construction Year to: 11.2008
• Filter type: In-Line Filter
• Height [mm]: 144
• Outer Diameter [mm]: 56
• Diameter 3 [mm]: 8
• Diameter 4 [mm]: 8
• Manufacturer: PURFLUX

• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 16
• Height [mm]: 52
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: ATE
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Width [mm]: 88
• Thickness [mm]: 17
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: not prepared for wear warning indicator
• Brake Lining: With bevelled edges
• Observe technical data:
• Manufacturer: AUTO-GH

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Fitting Position: Rear Axle
• Construction Year to: 12.2008
• Brake System: ATE
• Width [mm]: 123
• Height [mm]: 51.9
• Thickness [mm]: 15.8
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS
• Additional information: 231-02-004 ABAK
• Lisainfo: 231-02-004 ABAK

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Diameter [mm]: 65.5
• Width [mm]: 32
• Tensioner Pulley Actuation: Automatic
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Weight [kg]: 0.247
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 55
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5.5
• Packaging height [cm]: 2.2
• Manufacturer: FEBEST

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 15
• Width [mm]: 87
• Height [mm]: 52.9
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws
• Weight [kg]: 0.73
• Manufacturer: TOMEX

• Width [mm]: 87
• Height [mm]: 53
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Brake System: Lucas
• Fitting Position: Rear Axle
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-2060
• Additional information: 19-2060

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Brake Lining: With bevelled edges
• Observe technical data:
• Manufacturer: AUTO-GH

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Brake System: Girling-Lucas
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 53.1
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 87.2
• Thickness 1 [mm]: 16
• Manufacturer: METELLI UKL.HAMULCOWY

• Height [mm]: 51.9
• Thickness [mm]: 16.7
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Teves
• Article number of recommended accessories: 27-0553
• Fitting Position: Rear Axle
• Width [mm]: 123
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-0524
• Additional information: 19-0524

• Construction Year to: 12.2008
• Fitting Position: Rear Axle
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 52.9
• Brake System: TRW
• Width 1 [mm]: 87
• Thickness 1 [mm]: 15
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 16
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 20960
• Weight [kg]: 0.87
• Manufacturer: VALEO
• Name: VA 301474
• Additional information: VAL301474
• Lisainfo: VAL301474

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 20960
• Weight [kg]: 0.87
• Name: VA 301463
• Manufacturer: VALEO

• Fitting Position: Front Axle
• Construction Year from: 11.2005
• Construction Year to: 12.2008
• Brake System: ATE
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.3
• Thickness [mm]: 18.3
• Test Mark: ECE R90
• Height 1 [mm]: 68.9
• Height 2 [mm]: 66.8
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 10.2005
• Fitting Position: Front Axle
• Width [mm]: 136.8
• Thickness [mm]: 18.2
• Height [mm]: 59.5
• Wear Warning Contact: excl. wear warning contact
• Brake System: Bosch
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Construction Year to: 11.2008
• Fitting Position: Rear Axle
• Width [mm]: 87.1
• Height [mm]: 52.8
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY
• Lisainfo: 0252096117
• Additional information: 0252096117

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Height [mm]: 59.5
• Thickness [mm]: 18.1
• Wear Warning Contact: excl. wear warning contact
• Brake System: Bosch
• Article number of recommended accessories: 27-1444
• Fitting Position: Front Axle
• Width [mm]: 137
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Thickness [mm]: 16.1
• Test Mark: R90 Homologated
• Length [mm]: 87
• Weight [kg]: 0.95
• Height 1 [mm]: 53
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Packing Type: Carton
• WVA Number: 20961
• Number of springs: 4
• Number of threaded bolts: 4
• Number of clips: 4
• Fitting Position: Rear Axle
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Width [mm]: 137
• Thickness [mm]: 18
• Height [mm]: 60
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Bosch
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Thickness [mm]: 18
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height 1 [mm]: 69
• Height 2 [mm]: 67
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Width [mm]: 155
• Thickness [mm]: 18
• Height [mm]: 67
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: ATE
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Width 1 [mm]: 87
• Height 1 [mm]: 52.9
• Thickness 1 [mm]: 15
• Brake System: LUCAS/TRW
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 0.86
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Width [mm]: 32
• Outer Diameter [mm]: 66
• Manufacturer: KAMOKA

• Outer Diameter [mm]: 65
• Width [mm]: 32
• Lisainfo: Tensioner Pulley, timing belt
• Additional information: Tensioner Pulley, timing belt

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D1017-7920 D1112-821
• Test Mark: E1 90R-01878/507
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP565
• Additional information: LP565 DELPHI
• Lisainfo: LP565 DELPHI

• Fitting Position: Rear Axle
• Braking System: for vehicles without ceramic brakes
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 16.6
• Length [mm]: 87
• Height [mm]: 53
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake Lining: With bevelled edges
• Brake System: TRW
• WVA Number: 20961
• Manufacturer: SKF KLOCKI HAM

• Height 1 [mm]: 66.4
• Height 2 [mm]: 68.7
• Thickness [mm]: 18.3
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Article number of recommended accessories: 27-1445
• Fitting Position: Front Axle
• Width 1 [mm]: 156
• Width 2 [mm]: 155
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 11.2005
• Construction Year to: 12.2008
• Fitting Position: Front Axle
• Thickness [mm]: 18.3
• Brake System: ATE
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.3
• Height 1 [mm]: 68.9
• Height 2 [mm]: 66.8
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Driven Units: Camshaft
• Weight [kg]: 0.269
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 66
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Construction Year to: 11.2008
• Fitting Position: Rear Axle
• Manufacturer Restriction: Motrio
• Thickness [mm]: 15
• Test Mark: R90
• Width [mm]: 87
• Height [mm]: 52.9
• Wear Warning Contact: without integrated wear sensor
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 53
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Construction Year to: 11.2005
• Fitting Position: Front Axle
• Wear Warning Contact: without integrated wear sensor
• Manufacturer Restriction: BOSCH
• Height 1 [mm]: 59.1
• Width 1 [mm]: 136.8
• Thickness 1 [mm]: 18.3
• Manufacturer: JPN

• Construction Year to: 11.2005
• Fitting Position: Front Axle
• Brake System: BOSCH
• Width [mm]: 137
• Height [mm]: 59.1
• Thickness [mm]: 17.4
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 23930
• Weight [kg]: 1.96
• Manufacturer: VALEO
• Name: VA 301558

• Fitting Position: Rear Axle
• Thickness [mm]: 16
• Length [mm]: 87.2
• Height [mm]: 53.2
• Brake System: TRW
• Braking/Driving Dynamics Article Reference: for ABS
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Brake Lining: With bevelled edges
• Test Mark: E9 90R - 01120/457
• Observe technical data:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Lisainfo: GDB1330
• Additional information: GDB1330

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Construction Year to: 11.2005
• Fitting Position: Front Axle
• Wear Warning Contact: without integrated wear sensor
• Manufacturer Restriction: BOSCH
• Height 1 [mm]: 59.1
• Width 1 [mm]: 136.8
• Thickness 1 [mm]: 18.3
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D1017-7920 D1112-821
• Test Mark: E1 90R-01878/507
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Name: DE LP2254
• Manufacturer: DELPHI

• Construction Year to: 11.2008
• Fitting Position: Rear Axle
• Width [mm]: 87.1
• Height [mm]: 52.8
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 87
• Thickness [mm]: 16
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws, with anti-squeak plate
• WVA Number: 20961, 23554
• Manufacturer: BREMBO
• Name: BR P 68 024

• Driven Units: Camshaft
• Construction Year to: 11.2008
• Number of Teeth: 132
• Length [mm]: 1,257
• Width [mm]: 27
• Manufacturer: KAMOKA

• Construction Year to: 11.2005
• Fitting Position: Front Axle
• Width [mm]: 136.8
• Height [mm]: 59
• Thickness [mm]: 18
• Wear Warning Contact: excl. wear warning contact
• Brake System: Bosch
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Construction Year to: 12.2008
• Fitting Position: Rear Axle
• Brake System: TRW
• WVA Number: 20961
• Length 1 [mm]: 87
• Height 1 [mm]: 53
• Thickness 1 [mm]: 16
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: Bendix
• Inner brake drum diameter [mm]: 203
• Width [mm]: 39
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle
• Wear Warning Contact: without integrated wear sensor
• Manufacturer Restriction: ATE
• Height 1 [mm]: 66.4
• Height 2 [mm]: 68.8
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness 1 [mm]: 17.4
• Thickness 2 [mm]: 17.4
• Manufacturer: JPN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D1495-8695
• Test Mark: E1 90R-01881/1147
• Brake System: Bosch
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 23930
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 136.9
• Width 2 [mm]: 136.9
• Height 1 [mm]: 59.5
• Height 2 [mm]: 59.5
• Thickness 1 [mm]: 18
• Thickness 2 [mm]: 18
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1730

• Fitting Position: Front Axle
• Length [mm]: 155.3
• Length 1 [mm]: 156.5
• Height [mm]: 68.7
• Height 1 [mm]: 66.3
• Thickness [mm]: 17.5
• WVA Number: 23215, 24535
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Wear Warning Contact: without integrated wear sensor
• Manufacturer Restriction: ATE
• Height 1 [mm]: 66.4
• Height 2 [mm]: 68.8
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness 1 [mm]: 17.4
• Thickness 2 [mm]: 17.4
• Manufacturer: PROFIPOWER