Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 20
- Lisainfo: Stabiliser Mounting
- Additional information: Stabiliser Mounting
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Pikkus (mm): 36,
5 -
Siseläbimõõt [mm]: 19,
5 - Välisläbimõõt [mm]: 69
- Manufacturer: 3RG
- Inner Diameter [mm]: 21.5
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.045
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 21
- Weight [kg]: 0.046
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 77 01 056 678
- Manufacturer: GSP
- Inner Diameter [mm]: 21.5
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.045
- Name: SW 60 93 9629
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 20
- Inner Diameter [mm]: 18.5
- Length [mm]: 36
- Width [mm]: 41
- Height [mm]: 69
- for OE number: 7701056096
- Manufacturer: SASIC
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 21
- Inner Diameter [mm]: 19.5
- Length [mm]: 39
- Width [mm]: 41
- Height [mm]: 69
- for OE number: 7701056678
- Manufacturer: SASIC
- Additional information: 4005150
- Lisainfo: 4005150
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Suspension: for vehicles with standard suspension
- paired article number: VKDS 356000
- Length [mm]: 69
- Inner Diameter [mm]: 19.5
- Outer Diameter [mm]: 36
- Manufacturer: SKF ZAWIESZENIE
- Inner Diameter [mm]: 20.5
- Fitting Position: Front Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 20.5
- Fitting Position: Front Axle
- Weight [kg]: 0.05
- Name: SW 60 93 9646
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 19.5
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.08
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
08 -
Siseläbimõõt [mm]: 19,
5 - Laagritüüp: Kummipuks
- Kaal (g): 80
- Manufacturer: METALCAUCHO
- Material: Sheet Steel
-
Surface: Zinc-
coated -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.14
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 4
- Installatsiooni pool: esisild mõlemapoolselt
-
Kaal (kg): 0,
14 - vajaminev tükihulk: 2
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle,
inner, Lower - Stabiliser Diameter [mm]: 19.5
- Quantity per packing unit: 2
- Name: DE TD1316W
- Manufacturer: DELPHI
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19.5
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks