• Quantity per packing unit: 2
• Fitting Position: Front Axle both sides
• Height [mm]: 162
• Weight [kg]: 0.195
• Weight [g]: 195
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 48
• Manufacturer: METALCAUCHO

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Name: CFD PK3003
• Manufacturer: DACO

• Suspension: for vehicles without sports suspension
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Manufacturer: KYB
• Name: KY 910043

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
RENAULT LAGUNA II
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
RENAULT LAGUNA II
(kvaliteediklass: PJ)"

• Quantity per packing unit: 2
• Quantity per axle: 1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 545
• Length 2 [mm]: 427
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Monotube
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Name: CFD 563932
• Manufacturer: DACO

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Length [mm]: 551
• Length 2 [mm]: 458
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 38
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 6215G

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
RENAULT LAGUNA 01-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
RENAULT LAGUNA 01-
(kvaliteediklass: PJ)"

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-RE-005
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 453926
• Manufacturer: DACO

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-363967, GH-694701
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 2.16
• Packaging length [cm]: 60
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAVO PARTS

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Name: BM SA0330
• Manufacturer: BREMSI

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Quantity per axle: 1
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 45
• Thread Size: M14x1,5
• Length 1 [mm]: 538
• Length 2 [mm]: 365
• Piston Rod Diameter [mm]: 20
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SE27/13X88A2
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Shock Absorber System: Twin-Tube
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye
• max. length [mm]: 555
• min. length [mm]: 453
• Standpipe Diameter [mm]: 48
• Piston Rod Diameter [mm]: 12
• Manufacturer: SNR AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Monotube
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KYB
• Name: KY 553803

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Monotube
• Length 1 [mm]: 472
• Length 2 [mm]: 549
• Bore Diameter [mm]: 36
• Piston Rod Diameter [mm]: 11
• Weight [kg]: 2
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB
• Name: KY 633717

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Oil Pressure
• Parameter: SF30/20X179A
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS
• Name: SHS 313577

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 544
• min. length [mm]: 324
• Standpipe Diameter [mm]: 45
• Piston Rod Diameter [mm]: 20
• Piston Rod Thread: M14X150
• Manufacturer: SNR AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN

Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB
• Name: KY 333717

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 365
• Length 2 [mm]: 540
• Bore Diameter [mm]: 30
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: MK185, PK171
• Weight [kg]: 4.8
• Packaging length [cm]: 57.5
• Packaging width [cm]: 20.3
• Packaging height [cm]: 20.3
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-131492
• Quality class: Q

Additional information: "Tootja: BILSTEIN
RENAULT LAGUNA II
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
RENAULT LAGUNA II
(kvaliteediklass: Q)"