• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-RE-002
• Manufacturer: NTY

• Fitting Position: Front Axle
• Fabrication Number: AB-RE-010K

• Fitting Position: Front Axle
• Weight [kg]: 0.17
• Supplementary Article/Supplementary Info: with bump stop
• Name: SW 60 56 0002
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.25
• Packaging length [cm]: 22
• Packaging width [cm]: 7.5
• Packaging height [cm]: 7.5
• Manufacturer: FEBEST

• Suspension: for vehicles without bad road version
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: KAITSEMšTS/KAITSEKUMM,AMORT
• Manufacturer: KYB
• Additional information: 913237 KAYABA
• Lisainfo: 913237 KAYABA

• Fitting Position: Front Axle
• Weight [kg]: 0.17
• Supplementary Article/Supplementary Info: with bump stop
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid RENAULT P. CLIO/

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Monotube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 40
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 40
• Shock Absorber Design: Suspension Strut
• Name: CFD 533976
• Manufacturer: DACO

Spring Type: for vehicles with 2 torsion bars, for vehicles with 4 torsion bars

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 40
• Shock Absorber System: Monotube
• Manufacturer: DENCKERMANN AMORTYZATORY

Spring Type: for vehicles with 2 torsion bars, for vehicles with 4 torsion bars

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 40
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 50
• Shock Absorber System: Monotube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Suspension: for vehicles without bad road version
• Spring Type: for vehicles with 2 torsion bars
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

• Suspension: for vehicles with standard suspension
• Check OE number:
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Quantity per axle: 1
• Manufacturer: TRW

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 50
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 50
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 40
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year to: 12.2006, 06.2008
• Suspension: for vehicles with standard suspension
• Block Separation:
• Shock Absorber Mounting Type: Bottom Clamp, Top pin
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Fitting Position: Front Axle
• Article number of recommended accessories: 72-1215
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5528
• Additional information: MGA-5528

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
RENAULT KANGOO 98-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
RENAULT KANGOO 98-
(kvaliteediklass: PJ)"

• Suspension: for vehicles with standard suspension
• Payload: not for increased payload
• Check OE number:
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 45
• Length 1 [mm]: 494
• Length 2 [mm]: 352
• Piston Rod Diameter [mm]: 20
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW
• Additional information: JHM299T
• Lisainfo: JHM299T

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Payload: for increased payload
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Suspension: for vehicles without bad road version
• Spring Type: for vehicles with 2 torsion bars
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Name: Amort
• Manufacturer: SAA

• Parameter: DP1610.10.0093
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 50
• Manufacturer: DRIVE

• Payload: for increased payload
• Block Separation:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

Suspension: for vehicles without bad road version, for vehicles with standard suspension, for vehicles with bad road version

• Fitting Position: Front Axle Left, Front Axle Right
• Suspension: for vehicles without bad road version
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Manufacturer: DACO GERMANY

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694701
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• Length [mm]: 396
• Length 2 [mm]: 276
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 44
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7119G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0136, SMJ0248
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 40
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Spring Type: for vehicles with 2 torsion bars, for vehicles with 4 torsion bars Technical Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMA0136, SMA0248
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0136, SMJ0248
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Construction Year to: 12.2006
• Fitting Position: Rear Axle
• Trim Level: CUN
• Payload [kg]: 580
• Spring Type: for vehicles with 2 torsion bars
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 1.3
• Bore Diameter [mm]: 36
• Length 1 [mm]: 313
• Length 2 [mm]: 405
• Piston Rod Diameter [mm]: 11
• Packaging length [cm]: 45
• Packaging width [cm]: 5.5
• Packaging height [cm]: 5.3
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Right, Front Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• max. length [mm]: 525
• Manufacturer: FAST

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Bore Diameter [mm]: 14
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 213
• Fastening hole spacing [mm]: 55
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: AK-735257
• Suspension Strut Outer Diameter [mm]: 45
• Manufacturer: OPTIMAL ZAWIESZENIE

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

Article number of recommended accessories: 16-14 641 0004, 16-14 642 0000, 16-14 641 0005/S, 16-14 641 0004/S

• Parameter: DP1610.10.0007
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper with Rebound Spring, Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: KYB

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Bore Diameter [mm]: 14
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 213
• Fastening hole spacing [mm]: 55
• Piston Rod Diameter [mm]: 20
• Suspension Strut Outer Diameter [mm]: 45
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SM0136, SM0248
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Outer Diameter [mm]: 50
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Technical Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Diameter [mm]: 30
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: MK100, PK066
• Packaging length [cm]: 57.1
• Packaging width [cm]: 17
• Packaging height [cm]: 17
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Construction Year to: 12.2006
• Fitting Position: Rear Axle
• Trim Level: CU+
• Payload [kg]: 750
• Spring Type: for vehicles with 4 torsion bars
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 1.9
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.4
• Packaging height [cm]: 6.4
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: KYB

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Parameter: ET45X76A2
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Outer Diameter [mm]: 50
• Name: AMORT
• Manufacturer: SAA

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: ET36X97A2
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Name: Amort
• Manufacturer: SAA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
RENAULT KANGOO
(kvaliteediklass: Q)"