• Housing Colour: black
• Spanner Size: 21
• for OE number: 9109810
• Manufacturer: KAMOKA

• Switch Pressure [bar]: 0.2
• Thread Size: M18x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Construction Year from: 09.1997
• Connector Shape: round
• Operating Mode: Hydraulic
• Colour Coding: green
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Shifting Points [bar]: 0.2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: FAST

• Engine Code: F3R 722
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Housing Colour: green
• Length [mm]: 45
• External Thread Size: M18 x 1,5
• Spanner Size: 23
• Number of connectors: 1
• Shifting Points [bar]: 0.15
• Weight [kg]: 0.044
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 45
• Housing Colour: green
• External Thread Size: M18 x 1,5
• Spanner Size: 23
• Number of connectors: 1
• Shifting Points [bar]: 0.15
• Weight [kg]: 0.044
• Supplementary Article/Info 2: with seal ring
• Name: SW 60 10 2824
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: F3R 768
• Construction Year from: 08.1997
• Pressure [bar]: 0
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• for OE number: 09109661
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: F3R 722
• Pressure [bar]: 0
• Thread Size: M18x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Thread Size: M 14x1,5
• Housing Colour: green
• Manufacturer: FAE

• Connector Shape: rectangular
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 9109810
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Connector Shape: rectangular
• Colour Coding: white
• Sensor Type: NTC Sensor
• Number of pins: 2
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Manufacturer: ERA

• Number of connectors: 2
• Manufacturer: 3RG

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: F3R 768
• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Thread Size: M 12x1,25
• Spanner Size: 24
• Number of pins: 2
• Fabrication Number: ESS-NS-004
• Manufacturer: NTY

• Engine Code: F3R 722
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Voltage [V]: 12
• Length [mm]: 280
• Number of pins: 2
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV284

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Housing Colour: white
• Sensor Type: NTC Sensor
• Diameter [mm]: 20
• Manufacturer: FAE

• Engine Code: F3R 768
• for article number: 1.880.177, 1.880.178
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: F3R 768
• Cable Length [mm]: 280
• Transmission Type: Manual Transmission
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

Manufacturer: FAE

• Engine Code: F3R 768
• Warn Temperature [°C]: 120
• for article number: 1.880.178
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Switch Point [°C]: 120
• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Construction Year from: 01.1996
• Construction Year to: 12.2000
• Engine Code: F3R.6.11,F3R.7.68
• Alternatively:
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 240
• Weight [kg]: 0.1
• Manufacturer: VALEO
• Name: VA 254103

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Engine Code: F3R769
• Cable Length [mm]: 240
• Fitting Depth [mm]: 24
• Resistance [Ohm]: 240
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 01.1996
• Construction Year to: 12.2000
• Engine Code: F3R.6.11,F3R.7.68
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 240
• Weight [kg]: 0.08
• Name: VA 254025
• Manufacturer: VALEO

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 82 00 680 689, 22060 00Q0A
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Engine Code: F3R 722
• Thread Size: M12x1,25
• Spanner Size: 24
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Thread Size: M12x1.25
• Spanner Size: 24
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: FAST

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year from: 01.1996
• Construction Year to: 12.2000
• Engine Code: F3R.6.11,F3R.7.68
• Resistor [Ohm]: 235
• Cable Length [mm]: 250
• Sensor Type: Inductive Sensor
• Colour: grey
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: F3R 722
• Length [mm]: 280
• Manufacturer: FACET
• Name: EP 1.953.023

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.052
• Manufacturer: ERA

• Supplementary Article/Info 2: with cable
• Length [mm]: 520
• Height [mm]: 24
• Resistor [Ohm]: 240
• Number of connectors: 2
• Manufacturer: VERNET

• Cable Length [mm]: 290
• Manufacturer: FAE

• Engine Code: F3R 768
• Construction Year from: 09.1995
• Fitting Position: before catalytic converter
• Lambda Sensor: Lambda Sensor
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Engine Code: F3R 722
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 560
• Number of circuits: 3
• Weight [kg]: 0.138
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: F3R 768, F3R729/F3R769, F3R728
• Cable Length [mm]: 280
• Manufacturer: DELPHI

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Engine Code: F3R 768
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of circuits: 4
• Socket colour: black
• Connector Shape: angular
• Number of pins: 4
• Thread Size: M18 x 1,5
• Weight [kg]: 0.11
• for OE number: 77 00 870 827
• Cable Length [mm]: 170
• Length [mm]: 250
• Number of connectors: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.1995
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: F3R 768, F3R729/F3R769, F3R728
• Cable Length [mm]: 300
• Name: DE ES10969-12B1
• Manufacturer: DELPHI

• Engine Code: F3R 768, F3R 729, F3R 769
• Construction Year from: 09.1995
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe
• Length [mm]: 250
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Tightening Torque [Nm]: 22
• Spanner Size: 24
• Thread Size: M12 x 1,25
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108881
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: F3R 768, F3R 729, F3R 769
• Construction Year from: 09.1995
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 282
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS