• Engine Code: F3P 678
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Socket colour: white
• Connector Shape: rectangular
• Thread Size: M 12x1,5
• Spanner Size: 21
• for OE number: 3345511
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: white
• Sensor Type: NTC Sensor
• for OE number: 30809548
• Manufacturer: MEAT & DORIA

• Number of pins: 3
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 21
• for OE number: 8200561449
• Manufacturer: MEAT & DORIA

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Engine Code: F3P 670
• Colour: white
• Number of pins: 2
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 12569240, 1920 FC, 62 38 927, 7 700 706 876
• Number of pins: 3
• Fabrication Number: ECM-PL-008
• Manufacturer: NTY
• Lisainfo: OPEL ASTRA G 1.4 16V, VECTRA B 1.6 95-
• Additional information: OPEL ASTRA G 1.4 16V, VECTRA B 1.6 95-

• Thread Size: M 12x1,25
• Spanner Size: 24
• Number of pins: 2
• Fabrication Number: ESS-NS-004
• Manufacturer: NTY

• Diameter [mm]: 20
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

• Engine Code: F3P 678
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET
• Name: EP 1.830.191

• Engine Code: F3P 678
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

Manufacturer: MAGNETI MARELLI

• Engine Code: F3P 670
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: F3P 670
• Manufacturer: FACET

• Engine Code: F3P 670
• for article number: 1.880.177, 1.880.178
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: F3P 670
• for article number: 7.8177, 7.8178
• Manufacturer: FACET

• Pressure from [kPA]: 15
• Pressure to [kPA]: 10
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Connector Shape: rectangular
• Colour: black
• for OE number: 7700706876
• Manufacturer: DELLO AUTOMEGA

• Engine Code: F3P 670
• Warn Temperature [°C]: 120
• for article number: 1.880.178
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• for OE number: 6238927
• Manufacturer: MEAT & DORIA

• Connector Shape: rectangular
• Number of pins: 3
• for OE number: 12569240, 1920 FC, 62 38 927, 7700 706 876
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: MAGNETI MARELLI

• Supplementary Article/Info 2: with cable
• Length [mm]: 290
• Height [mm]: 24
• Resistor [Ohm]: 240
• Number of connectors: 2
• Manufacturer: VERNET

• Number of connectors: 3
• Manufacturer: JPN

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.064
• Alternative Repair Kit: 550140
• Manufacturer: ERA

• Thread Size: M 12x1,5
• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Number of pins: 2
• Manufacturer: JPN

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Measuring Range from [kPa]: 15
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.21
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 2206000Q0A
• Manufacturer: MEAT & DORIA

• Engine Code: F3P 670
• Thread Size: M12x1,25
• Spanner Size: 24
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Thread Size: M12x1.25
• Spanner Size: 24
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: FAST

• Oxygen Sensor: Switching-type Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Engine Code: F3P 670
• Construction Year to: 04.1997
• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.06
• for OE number: 62 38 927
• Name: SW 40 93 3629
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 3
• Manufacturer: KAMOKA

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Sensor
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Sensor Type: Piezoelectric Sensor
• Number of pins: 3
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MEY

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Sensor
• Manufacturer: JAPKO

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Construction Year to: 04.1998
• Engine Code: F3P678
• Exhaust System: for pre-catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Number of pins: 2
• Name: DE AS10236
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Construction Year to: 02.2001
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 422
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 06.1998
• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 100,000
• Voltage [V]: 5
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• Manufacturer: FAE

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0114
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Engine Code: F3P 678
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 3
• Cable Length [mm]: 570
• Weight [kg]: 0.098
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Construction Year to: 02.2001
• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 570
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.15
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Oxygen Sensor: Regulating Sensor, Finger-type Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Regulating Sensor, Finger-type Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Manufacturer: DELPHI

• Engine Code: F3P 670
• Construction Year to: 04.1997
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Operating Mode: pneumatic
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: PIE

• Engine Code: F3P 670
• Pressure from [kPA]: 15
• Pressure to [kPA]: 102
• Output Voltage, from [V]: 0.261
• Output Voltage, up to [V]: 4.958
• Name: EP 1.993.001
• Manufacturer: EPS

• Engine Code: F3P 670
• Pressure from [kPA]: 15
• Pressure to [kPA]: 102
• Output Voltage, from [V]: 0.261
• Output Voltage, up to [V]: 4.958
• Manufacturer: FACET

• Construction Year to: 04.1998
• Engine Code: F3P 678,F3P.6.70
• Name: DETONATSIOONIANDUR
• Manufacturer: VAL

• Engine Code: F3P 678
• Construction Year to: 02.2001
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: F3P 670
• Construction Year to: 04.1997
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 282
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: F3P 670
• Construction Year to: 04.1997
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 250
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: F3P 678
• Construction Year to: 02.2001
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 255
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 7700871544
• Quality: OE
• Weight [g]: 90
• Gross Weight [g]: 120
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor