• Engine Code: H5F 408
• Housing Colour: black
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Engine Code: H5F 408
• Required quantity: 1
• Corresponds to the original part in colour: brown, green
• Manufacturer: FACET

• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-001
• Manufacturer: NTY

• Engine Code: H5F 408
• Required quantity: 1
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Fabrication Number: ECM-RE-006
• Manufacturer: NTY

Lisainfo: ENG. 0.9-2.5D RENAULT CLIO 12-,MEGANE 03-,TRAFIC 06-, OPEL MOVANO 06-,VIVARO 01-,NISSAN MICRA III 05-12,NOTE 06-12,FIAT 500 09-,DOBLO 10-,DACIA DUSTER 10-,LOGAN 10-,DOKKER 12-,ALFA ROMEO 159 09-12, GIULIETTA 10- Additional information: ENG. 0.9-2.5D RENAULT CLIO 12-,MEGANE 03-,TRAFIC 06-, OPEL MOVANO 06-,VIVARO 01-,NISSAN MICRA III 05-12,NOTE 06-12,FIAT 500 09-,DOBLO 10-,DACIA DUSTER 10-,LOGAN 10-,DOKKER 12-,ALFA ROMEO 159 09-12, GIULIETTA 10-

• Required quantity: 1
• Manufacturer: VERNET
• Additional information: AS0006 VERNET
• Lisainfo: AS0006 VERNET

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV171

• Engine Code: H5F 408
• Housing Colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Engine Code: H5F 408
• Housing Colour: black
• Manufacturer: FACET

for article number: 7.8666, 7.8703S, 7.8706, 7.8710S, 7.8716, 7.8718, 7.8719, 7.8720, 7.8737, 7.8782, 7.8785, 7.8883, 7.8916, 7.8930

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: FAST

Manufacturer: JPN

• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV152

• Engine Code: H5F 408
• Required quantity: 2
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Construction Year to: 12.2018
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Number of pins: 3
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Required quantity: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Number of pins: 3
• Manufacturer: JPN

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 300
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 3
• Manufacturer: VERNET

• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.06
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: oval
• Pressure from [bar]: 0.11
• Supplementary Article/Info 2: with seal ring
• Pressure to [bar]: 3.07
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA RENAULT LAGUNA 1,9DCI 01-
• Manufacturer: BRM

• Height [mm]: 28.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Pikkus, mõõteandur [mm]: 28,2
• Manufacturer: JPN

• Alternatively:
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550734
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550897
• Manufacturer: ERA

• Number of pins: 3
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10130

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Engine Code: H5F 408
• Required quantity: 2
• Manufacturer: FACET

• Number of pins: 3
• Quality: OE EQUIVALENT
• for OE number: 55209194
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2018
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11142
• Additional information: SS11142 DELPHI
• Lisainfo: SS11142 DELPHI

• Construction Year to: 12.2018
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: H5F 408
• Required quantity: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 55209194
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• for OE number: 12 35 029
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 93 7055
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: H5F 408
• Sensor Type: Piezoelectric Sensor
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor

• Fitting Depth [mm]: 27.8
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP158.01
• Manufacturer: SNR

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: Andur,Nukkvollipositsioon
• Manufacturer: VAL

• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 55209194
• Name: SW 70 94 9441
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: H5F 408
• Required quantity: 1
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Engine Code: H5F 408
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: H5F 408
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Guarantee: 5 years guarantee
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur, v„ntvoll
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Manufacturer Restriction: Citroen, Fiat, Opel, Peugeot
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: HBE

for OE number: 0 261 230 218, 0 281 002 205, 0 281 002 215, 0 281 002 468, 0 281 002 709, 0 281 002 999, 0 281 006 028

• Engine Code: H5F 408
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: H5F 408
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: VDO

• Construction Year to: 12.2018
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Alternatively:
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550756
• Manufacturer: ERA

• Supplementary Article/Info 2: High Pressure Side
• Fabrication Number: EFP-RE-006
• Manufacturer: NTY
• Name: NTY EFP-RE-006

• Required quantity: 1
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PP358152301
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 471
• Manufacturer: DELPHI
• Name: DE ES21071-12B1

• Number of connectors: 2
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor
• Fabrication Number: ESL-NS-009
• Cable Length [mm]: 414
• Manufacturer: NTY

• Number of circuits: 4
• Length [mm]: 340
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 340
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of connectors: 3
• Weight [kg]: 0.039
• for OE number: 16 63 807 83R
• Name: SW 33 10 8690
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: H5F 408
• Oxygen Sensor: Regulating Sensor
• Ülekandeliinide arv: 4
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Name: LAMBDA ANDUR
• Manufacturer: NTK

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.083
• for OE number: 82004-61432
• Name: SW 33 10 4184
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: for pre-catalytic converter
• for OE number: 8200771294
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: H5F 408
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 500
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Number of connectors: 3
• Weight [kg]: 0.039
• for OE number: 16 63 807 83R
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before catalytic converter
• Cable Length [mm]: 414
• Name: DE ES21088-12B1
• Manufacturer: DELPHI

Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated

• Engine Code: H5F 408
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 335
• Name: Lambda andur
• Manufacturer: DLP

• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Weight [kg]: 0.13
• Manufacturer: VALEO

Oxygen Sensor: Diagnostic Probe, Planar Sensor, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV435

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Oxygen Sensor: Regulating Sensor
• Exhaust System: for pre-catalytic converter
• for OE number: 226932962R
• Pikkus (mm): 485
• Pistikkontaktide arv: 4
• Manufacturer: FAE

• Exhaust System: for pre-catalytic converter
• for OE number: 8200771294
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 82
• Gross Weight [g]: 115
• Manufacturer: DENSO
• Name: DN DOX-2076

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor

• Emission Standard: Euro 6
• Fitting Position: Fuel Rail
• Supplementary Article/Info 2: High Pressure Side
• Colour: blue
• Thread Size: M10 x 1
• Manufacturer: METZGER

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 414
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 226932962R
• Quality: OE
• Weight [g]: 86
• Gross Weight [g]: 119
• Manufacturer: DENSO
• Name: DN DOX-0590
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Fitting Position: Front, before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 370
• Number of pins: 4
• Manufacturer: VEMO

Oxygen Sensor: Regulating Sensor, Planar Sensor, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Cable Length [mm]: 290
• Length [mm]: 414
• Oxygen Sensor: Regulating Sensor
• Quality: OE EQUIVALENT
• for OE number: 226932962R
• Name: Lambda andur
• Manufacturer: MD

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring