Lisainfo: Sensor, brake lining wear, rear

Lisainfo: Brake pad set, front, 16.1 mm

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-VW-000

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 375
• Fabrication Number: HCZ-VW-013
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Number of pins: 2
• Fabrication Number: HCZ-VW-001
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 255
• Brake Type: Disc Brake
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo
• Braking System: for vehicles without ceramic brakes
• Length [mm]: 325
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Braking System: for vehicles without ceramic brakes
• Brake Type: Disc Brake
• Length [mm]: 325
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.037
• Manufacturer: MINTEX

• Engine Code: CSZB
• Construction Year from: 06.2019
• Fitting Position: Rear Axle
• Required quantity: 2
• Length [mm]: 230
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Akebono
• Braking System: for vehicles with ceramic brakes
• Length [mm]: 370
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0275A

• Fitting Position: Front Axle
• Brake System: Akebono
• Braking System: for vehicles with ceramic brakes
• Length 1 [mm]: 370
• Brake Type: Disc Brake
• Name: DE LZ0205
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Brake System: Brembo
• Braking System: for vehicles without ceramic brakes
• Length 1 [mm]: 325
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0248

• Fitting Position: Front Axle
• Braking System: not for carbon-ceramic brake discs
• Brake Type: Disc Brake
• Length [mm]: 325
• Number of wear indicators [per axle]: 2
• Manufacturer: BREMBO
• Name: BR A 00 453

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 230
• Number of wear indicators [per axle]: 2
• Manufacturer: BREMBO
• Name: BR A 00 448

• Fitting Position: Front Axle
• for PR number: 1LV, 1ZQ
• Brake Type: Disc Brake
• Manufacturer Restriction: BREMBO
• Length [mm]: 250
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Required quantity: 2
• Brake Type: Disc Brake
• Length [mm]: 323
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Required quantity: 2
• Brake Type: Disc Brake
• Length [mm]: 227.4
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Braking System: for vehicles with ceramic brakes
• Equipment Code: 2EH, 1KQ
• FMSI Code: D1740-8963
• Test Mark: E9 90R-02A0841/4330
• WVA Number: 25512
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 187.6
• Width 2 [mm]: 187.5
• Height 1 [mm]: 86.7
• Height 2 [mm]: 86.7
• Thickness 1 [mm]: 17.4
• Thickness 2 [mm]: 17.4
• Name: DE LP3585
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Equipment Code: 1KZ, 1KF, 1KA, 1KB, 2EF, 1KW
• FMSI Code: D1416-8531 D1417-853
• Test Mark: E9 90R-01841/2809
• WVA Number: 24554
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 188
• Width 2 [mm]: 188
• Height 1 [mm]: 70.2
• Height 2 [mm]: 70.2
• Thickness 1 [mm]: 15.6
• Thickness 2 [mm]: 15.6
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2237

• Fitting Position: Front Axle
• Block Separation:
• FMSI Code: D1349
• Test Mark: E9 90R-02A0841/2639
• WVA Number: 25007
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 209.8
• Width 2 [mm]: 209.8
• Height 1 [mm]: 94.3
• Thickness 1 [mm]: 16.3
• Name: DE LP3629
• Manufacturer: DELPHI

Equipment Code: 1LU, 1LC, 1LM, 1LJ, 1LK, 1LH, 1LI, 1LP, 1LD, 1LL, 1ZL, 1LW

• Fitting Position: Front Axle
• Test Mark: E9 90R - 01107/2661
• Wear Warning Contact: prepared for wear indicator
• Manufacturer Restriction: BREMBO
• Width [mm]: 210
• Height [mm]: 94
• Thickness [mm]: 16
• Quality class: PJ
• Name: Brake pads

Equipment Code: 1LC, 1LD, 1LH, 1LI, 1LJ, 1LK, 1LL, 1LM, 1LP, 1LU, 1LW, 1ZL Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Fitting Position: Front Axle
• Construction Year to: 09.2018
• Equipment Code: 1LN
• FMSI Code: D1349-8641 D1577-961
• Test Mark: E1 90R-02A0378/0404
• WVA Number: 24295 24553
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 209.6
• Width 2 [mm]: 209.6
• Height 1 [mm]: 94.3
• Height 2 [mm]: 94.3
• Thickness 1 [mm]: 16.1
• Thickness 2 [mm]: 16.1
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle
• Construction Year from: 10.2018
• Equipment Code: 1LN
• FMSI Code: D1452-8642
• Test Mark: E9 90R-02A0841/4577
• WVA Number: 25701
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 209.8
• Width 2 [mm]: 209.6
• Height 1 [mm]: 94.2
• Height 2 [mm]: 94.2
• Thickness 1 [mm]: 16.1
• Thickness 2 [mm]: 16.1
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP3217

• Fitting Position: Front Axle
• Construction Year to: 09.2018
• Equipment Code: 1LN
• FMSI Code: D1452-8642
• Test Mark: E1 90R-02A0378/0319
• WVA Number: 24685 25701
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 210.2
• Width 2 [mm]: 210.2
• Height 1 [mm]: 94.2
• Height 2 [mm]: 94.2
• Thickness 1 [mm]: 16.1
• Thickness 2 [mm]: 16.1
• Name: DE LP3193
• Manufacturer: DELPHI

• Engine Code: MCS.ZA
• Construction Year from: 06.2019
• Fitting Position: Rear Axle
• Braking System: not for carbon-ceramic brake discs
• Supplementary Article/Info 2: with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24554
• Thickness [mm]: 15.9
• Width [mm]: 187.3
• Height [mm]: 69.6
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Number of pads: 4
• Thickness [mm]: 17
• Length [mm]: 209.5
• Height [mm]: 94.4
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: Brembo
• WVA Number: 24553
• Name: SK VKBP80293
• Manufacturer: SKF

• Construction Year from: 06.2019, 01.2022
• Fitting Position: Front Axle
• Braking System: not for carbon-ceramic brake discs
• for PR number: 1LU, A8F
• Block Separation:
• Supplementary Article/Info 2: with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 25007
• Thickness [mm]: 16.3
• Width [mm]: 209.8
• Height [mm]: 94.3
• Manufacturer: BOSCH

Engine Code: MCS.ZA, MCS.ZB

• Fitting Position: Rear Axle
• for PR number: 1KF, 1KZ
• Brake Size: 18"
• Braking System: for vehicles without ceramic brakes
• Article number of recommended accessories: MWI0494
• Width [mm]: 187.5
• Height [mm]: 69.9
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 24554
• Brake System: Brembo
• Packaging length [cm]: 20.9
• Packaging width [cm]: 13.4
• Packaging height [cm]: 8.8
• Weight [kg]: 2.2
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Equipment Code: 2EG, 2EM, 1KC, 1KG
• FMSI Code: D1740-8963 D2046-927
• Test Mark: E9 90R-02A0841/5431
• WVA Number: 25512
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 187.6
• Width 2 [mm]: 187.6
• Height 1 [mm]: 86.7
• Height 2 [mm]: 86.7
• Thickness 1 [mm]: 17.4
• Thickness 2 [mm]: 17.4
• Name: DE LP3655
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• for PR number: 1LH, 1LK
• Number of pads: 4
• Thickness [mm]: 15.7
• Length [mm]: 209.5
• Height [mm]: 94.4
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: Brembo
• WVA Number: 24295
• Name: SK VKBP80461
• Manufacturer: SKF

• Fitting Position: Rear Axle
• for PR number: 1KF, 1KZ
• Brake Size: 18"
• Braking System: for vehicles without ceramic brakes
• Article number of recommended accessories: 8DK 355 251-891
• Width [mm]: 187.5
• Height [mm]: 69.9
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 24554
• Brake System: Brembo
• Weight [kg]: 2.2
• Name: HE 8DB355015651
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Construction Year to: 09.2018
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: prepared for wear indicator
• Material: Ceramic
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 25701
• Test Mark: E20 90R-02A0166/0007
• Length [mm]: 209.5
• Thickness [mm]: 16.9
• Height [mm]: 94.3
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Equipment Code: 1LN
• Manufacturer Restriction: BREMBO
• Width [mm]: 209.5
• Height [mm]: 94.4
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R-01107/2661
• Manufacturer: TRW
• Lisainfo: GDB2004
• Additional information: GDB2004

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Width [mm]: 209.5
• Height [mm]: 94.4
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01107/2661
• Manufacturer: TRW

Equipment Code: 1LD, 1LL, 1LI, 1LP, 1ZL, 1LW, 1LK, 1LH, 1LM, 1LJ, 1LU, 1LC Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Braking System: not for carbon-ceramic brake discs
• Width [mm]: 187
• Thickness [mm]: 16
• Height [mm]: 70
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• WVA Number: 24554
• Manufacturer: BREMBO
• Name: BR P 65 020

• Fitting Position: Front Axle
• Thickness [mm]: 16
• Test Mark: R90 Homologated
• Width [mm]: 187
• Height [mm]: 70.1
• Weight [kg]: 12.17
• Height 1 [mm]: 70.1
• Wear Warning Contact: prepared for wear indicator
• Brake System: BREMBO
• Packing Type: Box
• WVA Number: 24554
• Packaging length [cm]: 20.6
• Packaging width [cm]: 12.2
• Packaging height [cm]: 7.8
• Manufacturer: JURID

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Engine Code: MCS.ZB
• Construction Year from: 09.2020
• Construction Year to: 12.2021
• Fitting Position: Front Axle
• Braking System: not for carbon-ceramic brake discs
• for PR number: A8F
• Supplementary Article/Info 2: with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24295
• Thickness [mm]: 16
• Width [mm]: 209.5
• Height [mm]: 94.3
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Construction Year to: 09.2018
• Fitting Position: Front Axle
• Thickness [mm]: 17.1
• Test Mark: R90 Homologated
• Width [mm]: 209.5
• Height [mm]: 94.6
• Weight [kg]: 3.85
• Height 1 [mm]: 94.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: BREMBO
• Packing Type: Box
• WVA Number: 24685
• Packaging length [cm]: 21.4
• Packaging width [cm]: 16.2
• Packaging height [cm]: 9.7
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Braking System: not for carbon-ceramic brake discs
• Rim Size [inch]: 18, 19
• Brake System: BREMBO
• Width 1 [mm]: 187
• Height 1 [mm]: 70
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

for PR number: 2EE, 2EJ, 1KF, 1KZ, 1KJ, 1KU, 2EA, 1KA, 1KB, 2EF, 2EN, 1KW

• Fitting Position: Front Axle
• for PR number: 1LN
• Width [mm]: 209.5
• Height [mm]: 94.3
• Thickness [mm]: 16
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Brembo
• Test Mark: E1 90R-02A0612/0493
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• for PR number: 1ZT
• Brake Size: 18"
• Braking System: for vehicles without ceramic brakes
• Width [mm]: 209.5
• Height [mm]: 94.3
• Thickness [mm]: 16.8
• Wear Warning Contact: incl. wear warning contact
• WVA Number: 26185
• Brake System: Brembo
• Weight [kg]: 3.44
• Name: HE 8DB355040201
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• for PR number: 1LN
• Construction Year to: 09.2018
• Braking System: not for carbon-ceramic brake discs
• Brake Size: 18"
• Width [mm]: 210
• Thickness [mm]: 17
• Height [mm]: 94
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• WVA Number: 25701
• Name: BR P 65 033
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Braking System: not for carbon-ceramic brake discs
• Rim Size [inch]: 18, 19
• Brake System: BREMBO
• Width 1 [mm]: 187
• Height 1 [mm]: 70
• Thickness 1 [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

for PR number: 2EE, 2EJ, 1KF, 1KZ, 1KJ, 1KU, 2EA, 1KA, 1KB, 2EF, 2EN, 1KW

• Fitting Position: Front Axle
• for PR number: 1LN
• Brake System: BREMBO
• Width 1 [mm]: 210
• Height 1 [mm]: 94
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Braking System: not for carbon-ceramic brake discs
• Rim Size [inch]: 18, 19, 20
• Brake System: BREMBO
• Width [mm]: 210
• Height [mm]: 94
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

for PR number: 1LU, 1LD, 1LM, 1LP, 1LK, 1LL, 1LC, 1LI, 1ZL, 1ZH, 1LJ, 1LW

• Fitting Position: Front Axle
• for PR number: 1ZT
• Brake Size: 18"
• Brake System: BREMBO
• Width [mm]: 210
• Height [mm]: 94
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• for PR number: 1LN
• Brake System: BREMBO
• Width 1 [mm]: 210
• Height 1 [mm]: 94
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Rim Size [inch]: 18, 19, 20
• Brake System: BREMBO
• Width [mm]: 210
• Height [mm]: 94
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

Braking System: not for carbon-ceramic brake discs, Low dust brake pads for PR number: 1LU, 1LD, 1LM, 1LP, 1LK, 1LL, 1LC, 1LI, 1ZL, 1LH, 1LJ, 1LW