• Fabrication Number: ESS-FT-002
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-HD-011
• Manufacturer: NTY

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Diameter [mm]: 25
• Height [mm]: 52
• Weight [kg]: 0.08
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Length [mm]: 55
• Weight [kg]: 0.04
• Material: Plastic
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV151

• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Thread Size: M14x1,5 mm
• Spanner Size: 22 mm
• for OE number: 996 606 410 00
• Manufacturer: MEAT&DORIA

• Construction Year from: 08.2002
• Construction Year to: 09.2004
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 24
• Manufacturer: MEAT&DORIA

• Construction Year to: 09.2004
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Number of pins: 4
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL CORSA 01-
• Manufacturer: BRM

• Engine Code: M 96.70
• Quantity: 2
• Name: EP 1.957.006
• Manufacturer: EPS

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.2004
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Construction Year to: 09.2004
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Overall Length [mm]: 145
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 115
• paired article number: 30457
• Weight [kg]: 0.07
• Manufacturer: A.B.S.

• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Warranty: 5 years warranty
• Manufacturer: HUCO

• Length [mm]: 52
• Inner Diameter [mm]: 8.4
• Number of connectors: 2
• Material: Plastic, Metal
• Weight [kg]: 0.045
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure from [kPA]: 20
• Pressure to [kPA]: 253
• Measuring Range from [V]: 0.39
• Measuring Range to [V]: 4.7
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400951
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Construction Year from: 08.2002
• Construction Year to: 09.2004
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Engine Code: M96.70/S
• Construction Year from: 06.2001
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: rectangular
• Cable Length [mm]: 730
• Thread Size: M18 x 1,5
• Weight [kg]: 0.013
• for OE number: 993 606 127 01
• Length [mm]: 850
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2003
• Construction Year to: 09.2004
• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 138
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Cable Length [mm]: 550
• Manufacturer: DELPHI

• Lambda Sensor: Heated
• Cable Length [mm]: 640
• Manufacturer: FAST

• Construction Year to: 08.2003
• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 143
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Engine Code: M 96.70
• Pressure from [kPA]: 11
• Pressure to [kPA]: 255
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.7
• Name: EP 1.993.092
• Manufacturer: EPS

• Construction Year from: 06.2001
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 720
• Number of pins: 4
• Socket colour: black
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year to: 09.2004
• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 09.2004
• Manufacturer: BOSCH

• Construction Year from: 06.2001
• Engine Code: M 96.70/S
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 400
• Number of pins: 4
• Lambda Sensor: Planar probe, Thread pre-greased
• Weight [kg]: 0.124
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Cable Length [mm]: 600
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 09.2004
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 750
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV856

• Engine Code: M 96.70
• Construction Year from: 06.2001
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 540
• Number of circuits: 4
• Manufacturer: VDO

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Construction Year to: 07.2002
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Construction Year to: 09.2004
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Construction Year to: 09.2004
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 1,000
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Number of pins: 5
• Manufacturer: ERA