Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 09.1982
- Length [mm]: 184
- Width [mm]: 164
- Height [mm]: 21
- Filter type: Filter Insert
- Manufacturer: JP GROUP
-
Lisainfo: Hydraulic filter,
gearbox -
Additional information: Hydraulic filter,
gearbox
- Construction Year to: 08.1982
-
Transmission Code: 722,
1 - Filter type: Screen Filter
- Manufacturer: JAPKO
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Transmission Code: 722.4
- Supplementary Article/Supplementary Info: with seal
- for article number: 126 277 02 95
- Width 1 [mm]: 48
- Height 1 [mm]: 234
- Weight [g]: 500
- Guarantee: 3 years guarantee
- Length 1 [mm]: 198
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Construction Year from: 09.1982
- Filter type: Suction Filter
- Length [mm]: 184
- Width [mm]: 164
- Height [mm]: 21
- Inner Diameter [mm]: 26
- Supplementary Article/Info 2: with oil sump gasket
- Bypass Valve Opening Pressure [bar]: 0.2
- Manufacturer: DENCKERMANN FILTRY
-
Transmission ID: 722.400-
722.440 -
Transmission Code: 722,
4 -
Transmission Type: 4-
Speed Automatic Transmission - See accessories list for additionally required parts:
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.652
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 09.1982
- Filter type: Filter Insert
-
Transmission Type: for 4-
speed automatic transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission number from: 722.300
- Transmission number to: 722.440
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 189.7
- Width [mm]: 175
- Height [mm]: 23
-
Supplementary Article/Supplementary Info: without gasket/
seal - Packaging length [cm]: 18
- Packaging height [cm]: 19
- Packaging width [cm]: 2
- Net Weight [g]: 320
- Manufacturer: MAHLE KNECHT
-
Transmission Type: Manual-
/ optional automatic transmission - Manufacturer: HENGST FILTER
- Construction Year from: 09.1982
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with oil sump gasket
- Length [mm]: 184
- Width [mm]: 164
- Height [mm]: 21
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- SVHC: No SVHC present!
-
Manufacturer: MANN-
FILTER
- Transmission number from: 722.300
- Transmission number to: 722.395
- Filter type: Filter Insert
- Length [mm]: 186.5
- Width [mm]: 171
- Height [mm]: 23.6
- Inner Diameter 2 [mm]: 33
- Transmission Code: 722.3
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
-
Recommended change interval [km]: 60,
000 - Packaging width [cm]: 2.9
- Packaging length [cm]: 26
- Packaging height [cm]: 38
- Net Weight [g]: 428
- Name: KN HX46D1
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Transmission number from: 722.400
- Transmission number to: 722.440
- Filter type: Filter Insert
- Length [mm]: 169
- Width [mm]: 171
- Height [mm]: 23.6
- Inner Diameter 2 [mm]: 33
- Transmission Code: 722.4
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
- Packaging width [cm]: 2.9
- Packaging length [cm]: 26
- Packaging height [cm]: 38
- Net Weight [g]: 420
- Name: KN HX46D2
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Transmission number from: 722.400
- Transmission number to: 722.440
- Filter type: Filter Insert
- Length [mm]: 169
- Width [mm]: 171
- Height [mm]: 23.6
- Inner Diameter 2 [mm]: 33
- Transmission Code: 722.4
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
- Packaging width [cm]: 2.9
- Packaging length [cm]: 26
- Packaging height [cm]: 38
- Net Weight [g]: 420
- Manufacturer: MAHLE KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Construction Year to: 08.1982
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 167
- Width [mm]: 136
- Height [mm]: 18.5
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- SVHC: No SVHC present!
- Manufacturer: MANN FILTRY
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks