Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Right
-
Exhaust System: for pre-
catalytic converter - Thread Size: M18x1.5
- Cable Length [mm]: 475
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 35428218
- Quality: OE
- Weight [g]: 113
- Gross Weight [g]: 146
- Manufacturer: DENSO
-
Name: DN DOX-
2044
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"
-
Oxygen Sensor: Regulating Sensor,
Thread pre- greased - Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
CH- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fabrication Number: ESL-
CH- 001 - Manufacturer: NTY
-
Name: NTY ESL-
CH- 001
Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Regulating Sensor
- Number of circuits: 4
- Manufacturer: KAMOKA
- Engine Code: EGT
- Construction Year from: 10.2007
- Required quantity: 2
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Length [mm]: 425
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.12
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV121
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
09 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV909
- Manufacturer: ESEN SKV
- Lambda andur: soojendatud
- Ülekandeliinide arv: 4
- Manufacturer: GEBE
-
Fitting Position: Left,
Right, Front, after catalytic converter -
Oxygen Sensor: Diagnostic Probe,
Finger- type Sensor, Heated - Quantity: 2
- Model Year to: 2009
- Cable Length [mm]: 300
- Manufacturer: DELPHI
-
Name: DE ES11003-
12B1 -
Additional information: ES11003-
12B1 DELPHI -
Lisainfo: ES11003-
12B1 DELPHI
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
- Construction Year to: 12.2009
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Required quantity: 2
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: ENERGY
- Construction Year to: 12.2009
-
Oxygen Sensor: Regulating Sensor,
Finger- type Sensor -
Fitting Position: Left,
Right, before catalytic converter - Block Separation:
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Construction Year to: 12.2009
- Oxygen Sensor: Regulating Sensor
-
Fitting Position: before catalytic converter,
Right - Number of circuits: 4
- Overall Length [mm]: 343
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Oxygen Sensor: Diagnostic Probe
- Construction Year from: 10.2007
- Exhaust System: after catalytic converter
- Lambda andur: soojendatud
- Pinge [V]: 12
- Pikkus (mm): 425
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
12 - Takistus [oom]: 6
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV679
- Manufacturer: ESEN SKV
- Additional information: 09SKV679
- Lisainfo: 09SKV679
- Construction Year to: 08.2009
- Fitting Position: after catalytic converter
- Required quantity: 2
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 355
- Number of pins: 4
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Diagnostic Probe, Finger-type Sensor, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Left,
after catalytic converter -
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 503
- Weight [kg]: 0.09
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Construction Year to: 08.2008,
12.2009 -
Oxygen Sensor: Regulating Sensor,
Diagnostic Probe - Required quantity: 2
- Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter
-
Oxygen Sensor: Regulating Sensor,
Diagnostic Probe - Number of pins: 4
- Cable Length [mm]: 380
- for OE number: 0045420818
- Manufacturer: MEAT&DORIA
-
Fitting Position: Left Front,
before catalytic converter -
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Oxygen Sensor: Regulating Sensor,
Planar Sensor, Heated - Quantity: 1
- Model Year to: 2009
- Cable Length [mm]: 489
- Name: Lambda andur
- Manufacturer: DLP
- Engine Code: EGT
- Model Year to: 2009
-
Fitting Position: Left,
Right, Front, after catalytic converter - Required quantity: 2
- Cable Length [mm]: 300
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: EP 1.998.175
- Manufacturer: EPS
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased
- Fitting Position: Left
-
Exhaust System: for pre-
catalytic converter - Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year to: 12.2009
- Oxygen Sensor: Regulating Sensor
-
Fitting Position: before catalytic converter,
Left, Right - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda andur: Bistabiilne andur
- Kaablipikkus (mm): 290
- valikuliselt:
- Ülekandeliinide arv: 4
- alternatiivne remondikomplekt: 570112
- Manufacturer: ERA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks