• Fitting Position: Right
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 35428218
• Quality: OE
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2044

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"

• Number of connectors: 2
• Manufacturer: JPN

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Fabrication Number: ECP-CH-015
• Manufacturer: NTY

• Construction Year to: 09.2008
• for OE number: 4606487AB
• Colour: black
• Number of pins: 2
• Connector Shape: angular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV681

• Fabrication Number: ECM-CH-005
• Manufacturer: NTY

• Length [mm]: 110
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-CH-000
• Manufacturer: NTY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: ESL-CH-001
• Manufacturer: NTY
• Name: NTY ESL-CH-001

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594623
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Manufacturer: FAE

• Required quantity: 1
• Construction Year from: 01.2008
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Required quantity: 1
• Construction Year to: 12.2007
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. CHRYSLER VOYAGER IV 3,3 00-

• Number of connectors: 2
• Weight [kg]: 0.006
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Production date to: 2007
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Cable Length [mm]: 105
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Engine Code: EGT
• Construction Year to: 12.2008
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Length [mm]: 425
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Required quantity: 1
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Manufacturer: GEBE

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor, Heated
• Quantity: 2
• Model Year to: 2007
• Block Separation:
• Model Year from: 2008
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES11003-12B1
• Additional information: ES11003-12B1 DELPHI
• Lisainfo: ES11003-12B1 DELPHI

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year to: 12.2009
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Required quantity: 2
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Construction Year to: 12.2009
• Oxygen Sensor: Regulating Sensor, Finger-type Sensor
• Fitting Position: Left, Right, before catalytic converter
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 12.2009
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Right
• Number of circuits: 4
• Overall Length [mm]: 343
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe
• Construction Year to: 12.2008
• Exhaust System: after catalytic converter
• Lambda andur: soojendatud
• Pinge [V]: 12
• Pikkus (mm): 425
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,12
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV679
• Manufacturer: ESEN SKV
• Additional information: 09SKV679
• Lisainfo: 09SKV679

• Construction Year to: 08.2008, 12.2009
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Required quantity: 2
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: Left, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 503
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 380
• for OE number: 0045420818
• Manufacturer: MEAT&DORIA

• Fitting Position: Left Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Quantity: 1
• Model Year to: 2007
• Cable Length [mm]: 489
• Name: Lambda andur
• Manufacturer: DLP

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Engine Code: EGT
• Model Year to: 2007
• Fitting Position: Left, Right, Front, after catalytic converter
• Required quantity: 2
• Block Separation:
• Model Year from: 2008
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.175
• Manufacturer: EPS

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 12.2009
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Left, Right
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA