• Fitting Position: Rear Axle Left, Rear Axle
• for brake disc thickness [mm]: 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 48
• Supplementary Article/Info 2: without holding frame
• Fabrication Number: HZT-CH-010
• Manufacturer: NTY

• Fitting Position: Rear Axle Right, Rear Axle
• for brake disc thickness [mm]: 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 48
• Supplementary Article/Info 2: without holding frame
• Fabrication Number: HZT-CH-011
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc thickness [mm]: 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 48
• Quantity per axle: 2
• Manufacturer: QUICK BRAKE
• Name: QB 114-0086

• Installatsiooni pool: Esisild, Tagasild
• Läbimõõt [mm]: 48
• Pidurisüsteem: ATE (Teves)
• Versioon: Basic Parts
• Name: FR 248165
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Diameter [mm]: 48.8
• Manufacturer: FEBEST

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 48
• Pidurisüsteem: ATE (Teves)
• Versioon: Basic Parts
• Name: FR 248170
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Manufacturer Restriction: ATE
• for piston diameter [mm]: 48
• Supplementary Article/Supplementary Info: with protective cap
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Rear Axle
• Diameter [mm]: 48
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 248067

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc thickness [mm]: 26
• Brake Caliper Type: Brake Caliper (2 pistons)
• Diameter [mm]: 48
• Quantity per axle: 2
• Manufacturer: QUICK BRAKE
• Name: QB 114-0252

• Fitting Position: Rear Axle
• Diameter [mm]: 48
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-598

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-898

• Fitting Position: Rear Axle
• for piston diameter [mm]: 48
• Brake System: ATE
• Weight [kg]: 0.04
• Manufacturer: ABS

• Fitting Position: Front Axle
• Diameter [mm]: 47.5
• Brake System: Akebono
• Manufacturer: FRENKIT
• Name: FR 248083

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 248077

• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc thickness [mm]: 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 48
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Manufacturer: QUICK BRAKE
• Name: QB 114-5034

• Fitting Position: Rear Axle
• Diameter [mm]: 48
• Brake System: ATE (Teves)
• Version: Kit+Piston
• Full Set:
• Name: FR 248973
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Diameter [mm]: 48
• Brake System: ATE
• Full Set:
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2069C
• Additional information: D42069C
• Lisainfo: D42069C

• Fitting Position: Rear Axle
• Diameter [mm]: 48
• Brake System: ATE
• Full Set:
• Version: PISTON KIT+GUIDEPINS
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-3389S

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc thickness [mm]: 26
• Brake Caliper Type: Brake Caliper (2 pistons)
• Diameter [mm]: 48
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Manufacturer: QUICK BRAKE
• Name: QB 114-5343

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE (Teves)
• Version: Kit+Piston
• Full Set:
• Manufacturer: FRENKIT
• Name: FR 248975

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE
• Full Set:
• for OE number: 5011972AA
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2068C
• Additional information: D42068C AUT
• Lisainfo: D42068C AUT

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE
• Full Set:
• Version: PISTON KIT+GUIDEPINS
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-3388S

• Fitting Position: Rear Axle Left
• Brake System: ATE
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 48
• paired article number: 131-04-628
• for brake disc thickness [mm]: 10
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Brake System: ATE
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 48
• paired article number: 131-04-627
• for brake disc thickness [mm]: 10
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Version: Superkit, Kit+Piston+GuidePins
• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE (Teves)
• Full Set:
• Manufacturer: FRENKIT

• Fitting Position: Front Axle Right, Front Axle
• Piston Diameter [mm]: 48
• Material: Cast Iron
• Fabrication Number: HZP-CH-003
• paired article number: HZP-CH-002
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle
• Piston Diameter [mm]: 48
• Fabrication Number: HZP-CH-002
• paired article number: HZP-CH-003
• Manufacturer: NTY

• Fitting Position: Front Axle Right, Front Axle
• Piston Diameter [mm]: 48
• Supplementary Article/Info 2: without holding frame
• Fabrication Number: HZP-CH-013
• paired article number: HZP-CH-012
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle
• Piston Diameter [mm]: 48
• Supplementary Article/Info 2: without holding frame
• Fabrication Number: HZP-CH-012
• paired article number: HZP-CH-013
• Manufacturer: NTY

• Fitting Position: Front Axle
• Diameter [mm]: 47
• Brake System: Akebono
• Version: Kit+Piston
• Full Set:
• Manufacturer: FRENKIT
• Name: FR 247901
• Additional information: 247901 FRENKIT
• Lisainfo: 247901 FRENKIT

• Fitting Position: Rear Axle Right
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: ATE
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 84
• Used part return not required:
• paired article number: 34SKV373
• Weight [kg]: 2.96
• Brake Disc Thickness [mm]: 10
• Brake Caliper Piston Diameter [mm]: 48
• Always compare old and new part (in particular OE No.):
• Name: CE 34SKV374
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Left
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: ATE
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 84
• Used part return not required:
• paired article number: 34SKV374
• Weight [kg]: 2.96
• Brake Disc Thickness [mm]: 10
• Brake Caliper Piston Diameter [mm]: 48
• Always compare old and new part (in particular OE No.):
• Name: CE 34SKV373
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Brake System: AKEBONO
• Diameter [mm]: 48
• Name: SE D4-2103C
• Manufacturer: AUTOFREN SEINSA

• Version: Superkit, Kit+Piston+GuidePins
• Fitting Position: Front Axle
• Diameter [mm]: 47
• Brake System: Akebono
• Full Set:
• Manufacturer: FRENKIT
• Additional information: 747301 FRENKIT
• Lisainfo: 747301 FRENKIT

• Fitting Position: Front Axle Right
• Brake System: ATE
• Brake Caliper Type: Brake Caliper (2 pistons)
• Used part return not required:
• New Part:
• Piston Diameter [mm]: 48
• paired article number: 131-04-537
• for brake disc thickness [mm]: 26
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Brake System: ATE
• Brake Caliper Type: Brake Caliper (2 pistons)
• Used part return not required:
• New Part:
• Piston Diameter [mm]: 48
• paired article number: 131-04-538
• for brake disc thickness [mm]: 26
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Brake System: AKEBONO
• Brake Caliper Type: Brake Caliper (2 pistons)
• Used part return not required:
• New Part:
• Piston Diameter [mm]: 48
• paired article number: 131-04-442
• for brake disc thickness [mm]: 26
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Additional information: 131-04-441 ABAK
• Lisainfo: 131-04-441 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Right, Rear Axle
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Right
• Brake System: AKEBONO
• Brake Caliper Type: Brake Caliper (2 pistons)
• Used part return not required:
• New Part:
• Piston Diameter [mm]: 48
• paired article number: 131-04-441
• for brake disc thickness [mm]: 26
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: AKEBONO
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 190
• Used part return not required:
• paired article number: 23SKV922
• Weight [kg]: 5.98
• Brake Disc Thickness [mm]: 26
• Brake Caliper Piston Diameter [mm]: 48
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 23SKV921
• Lisainfo: 23SKV921 SKV
• Additional information: 23SKV921 SKV

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: AKEBONO
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 190
• Used part return not required:
• paired article number: 23SKV921
• Weight [kg]: 5.98
• Brake Disc Thickness [mm]: 26
• Brake Caliper Piston Diameter [mm]: 48
• Always compare old and new part (in particular OE No.):
• Name: CE 23SKV922
• Manufacturer: ESEN SKV
• Lisainfo: 23SKV922 SKV
• Additional information: 23SKV922 SKV

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Supplementary Article/Supplementary Info: without electric motor
• Brake System: AKEBONO
• paired article number: JBC0116
• Piston Diameter [mm]: 47
• Distance of mounting bores [mm]: 190
• for brake disc thickness [mm]: 26
• Manufacturer: KAMOKA UK£ADY HAMULCOWE
• Additional information: JBC0115 KAMOKA
• Lisainfo: JBC0115 KAMOKA

• Fitting Position: Front Axle
• Brake System: AKEBONO
• Diameter [mm]: 48
• Full Set:
• Version: PISTON KIT+GUIDEPINS
• Name: SE D4-3396S
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Supplementary Article/Supplementary Info: without electric motor
• Brake System: AKEBONO
• paired article number: JBC0115
• Piston Diameter [mm]: 47
• Distance of mounting bores [mm]: 190
• for brake disc thickness [mm]: 26
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle, Left
• Diameter 1/Diameter 2 [mm]: 48,0
• Brake System: ATE
• Manufacturer: YSPARTS

• Fitting Position: Front Axle, Left
• Diameter 1/Diameter 2 [mm]: 47,0
• Brake System: AKEBONO
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: ATE
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 148
• Used part return not required:
• paired article number: 34SKV372
• Weight [kg]: 4.9
• Brake Disc Thickness [mm]: 26
• Brake Caliper Piston Diameter [mm]: 48
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 34SKV371

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: ATE
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 148
• Used part return not required:
• paired article number: 34SKV371
• Weight [kg]: 4.9
• Brake Disc Thickness [mm]: 26
• Brake Caliper Piston Diameter [mm]: 48
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 34SKV372

• Fitting Position: Front Axle, Left
• Diameter 1/Diameter 2 [mm]: 47,0
• Brake System: AKEBONO
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle Left
• Manufacturer Restriction: AKEBONO
• Brake Caliper Type: Fist-type Caliper (2 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 48
• paired article number: BHV710E
• Exchange Part:
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Manufacturer Restriction: AKEBONO
• Brake Caliper Type: Fist-type Caliper (2 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 48
• paired article number: BHV709E
• Exchange Part:
• Observe technical data:
• Manufacturer: TRW ZACISKI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Manufacturer Restriction: ATE
• Brake Caliper Type: Fist-type Caliper (2 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 48
• paired article number: BHV583E
• Exchange Part:
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Manufacturer Restriction: ATE
• Brake Caliper Type: Fist-type Caliper (2 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 48
• paired article number: BHV582E
• Exchange Part:
• Observe technical data:
• Manufacturer: TRW ZACISKI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake System: Akebono
• for brake disc thickness [mm]: 26
• Brake Caliper Type: Brake Caliper (2 pistons)
• Diameter [mm]: 48
• Quantity per axle: 2