Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Right,
Front Axle Left - Rod/Strut: Push Rod
- Manufacturer: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Suspension Rod
- Thread Size: M12x1.5xRHT
- Manufacturer: FAST
General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Length [mm]: 280
- Thread Size 2: M12x1.25
- Material: Plastic
- Weight [kg]: 0.33
-
Name: DY 30-
62612 - Manufacturer: DYS
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 280
- Rod/Strut: Coupling Rod
- Lisainfo: Link Stabiliser
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
-
Thread Size: M12 x 1,
25 - Length [mm]: 281
- Name: ALT 92969AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Rear Axle,
both sides - Rod/Strut: Coupling Rod
- Length [mm]: 183
- Thread Size 2: M12x1.25
- Manufacturer: PROFIPOWER
- Fitting Position: Rear Axle
- Weight [kg]: 0.236
- Rod/Strut: Coupling Rod
- Width [mm]: 41
- Height [mm]: 112
- max. length [mm]: 226
- Material: Plastic
-
Thread Size 1: M12x1,
25 - Quality class: PJ
- Name: Stabilizer link left=right
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Material: Steel
- Rod/Strut: Coupling Rod
- Weight [g]: 462
-
Supplementary Article/Info 2: with bolts/
screws - Length [mm]: 280
- Name: IM 25639
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: Rear Axle
- Weight [kg]: 0.26
- Rod/Strut: Coupling Rod
- Width [mm]: 42
- Height [mm]: 113
- max. length [mm]: 322
- Material: Plastic
-
Thread Size 1: M12x1,
25 - Quality class: PJ
- Name: Stabilizer link left=right
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Rod/Strut: Coupling Rod
- Length [mm]: 282
- Thread Size: M12X1.25 RHT
- Manufacturer: OYODO
- Fitting Position: Front Axle
- Weight [kg]: 0.332
- Rod/Strut: Coupling Rod
- Width [mm]: 40
- Height [mm]: 112
- max. length [mm]: 322
- Material: Plastic
-
Thread Size 1: M12x1,
25 - Quality class: PJ
- Name: Stabilizer link left=right
- Length [mm]: 280
- Thickness [mm]: 66
-
External Thread Size: M12 x 1,
25 - Thread Length [mm]: 29.5
- Material: Plastic
- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.354
- Supplementary Article/Supplementary Info: with nuts
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.293
- Rod/Strut: Coupling Rod
- Length [mm]: 184
- Material: Steel
- Thread Size 2: M12x1.25
- Quality class: PJ
- Name: Stabilizer link left=right
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Length [mm]: 280
- Thread Size 2: M12x1.25
- Material: Cast Steel
- Weight [kg]: 0.45
-
Name: DY 30-
62612- 5 - Manufacturer: DYS
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paaris tootenumbrid: VKDS 342007
- Õõtshoovad: Stabilisaatori otsavarras
- Piirangutega toode/piirangu info: sünteetilise määrdega
- Name: SK VKDS342007
- Manufacturer: SKF
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Name: DE TC7564
- Manufacturer: DELPHI
- Length [mm]: 280
- Thickness [mm]: 66
-
External Thread Size: M12 x 1,
25 - Thread Length [mm]: 29.5
- Material: Plastic
- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.354
- Supplementary Article/Supplementary Info: with nuts
- Observe service information:
- Name: SW 70 10 6211
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Weight [kg]: 0.451
- Rod/Strut: Coupling Rod
- Material: Steel
-
Thread Size 1: M12x1,
25 - Quality class: PJ
- Name: Stabilizer link left=right
- Rod/Strut: Coupling Rod
- Supplementary Article/Supplementary Info: with accessories
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 280
-
Thread Size: M12x1,
25 - Pipe Diameter [mm]: 26
- Manufacturer: TRW ZAWIESZENIE
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 280
- for OE number: 52201888
- Manufacturer: SASIC
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Coupling Rod
- Name: COC 49396352
- Manufacturer: CORTECO
-
Fitting Position: Front Axle,
Rear Axle - Block Separation:
- Rod/Strut: Coupling Rod
- Material: Plastic
- Length [mm]: 280
-
Thread Size: M12x1,
25 - SVHC: No SVHC present!
- Name: LU 818060210
- Manufacturer: FAG
- Length [mm]: 281
-
External Thread Size: M12 x 1,
25 - Thread Length [mm]: 31
- Material: Plastic
- Rod/Strut: Push Rod
- Diameter [mm]: 1
-
Fitting Position: outer,
Rear Axle Right, Rear Axle Left - Weight [kg]: 0.228
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Length [mm]: 282
- Thread Size: M12X1.25 RHT
- Rod/Strut: Suspension Rod
- paired article number: 261039
- Weight [kg]: 0.28
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Fitting Position: Front Axle
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Pikkus (mm): 280
- Õõtshoovad: Stabilisaatori otsavarras
-
Keermemõõt 1: M12x1,
5 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Rod/Strut: Suspension Rod
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 280
-
Thread Size: M12x1,
25 - Name: LMI 4350101
- Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Length [mm]: 280
- Thread Size: M12X1.5 RHT
- Rod/Strut: Suspension Rod
- paired article number: 261038
- Weight [kg]: 0.451
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Fitting Position: Front Axle
- Weight [kg]: 3.9
- Rod/Strut: Coupling Rod
- Manufacturer: FEBEST
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks