Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: oval
• Socket colour: green
• Sensor Type: NTC Sensor
• for OE number: 1338F8
• Manufacturer: MEAT&DORIA

• Fabrication Number: ESS-CT-001
• Manufacturer: NTY

• for OE number: 1338.F8
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: 5FS (EP6C)
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HEL

Name: CZUJNIK POO½ENIA WAKA ROZRZ. CITROEN BERLINGO 1,6-2,0 -04

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: brown, green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009309221

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Housing Colour: green
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 120-05-074

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV501
• Manufacturer: ESEN SKV

• Fabrication Number: ECM-CT-013
• Manufacturer: NTY

• Engine Code: 5FS (EP6C)
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 2
• Housing Colour: brown
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Engine Code: 5FS (EP6C)
• Manufacturer: FACET

• Resistor Type: Hall Sensor
• Height [mm]: 20
• Manufacturer: VERNET

• Engine Code: 5FS (EP6C)
• Housing Type: Synthetic Material Housing
• for article number: 1.880.865, 1.880.964
• Name: EP 1.830.399
• Manufacturer: EPS

• Engine Code: 5FS (EP6C)
• Housing Type: Synthetic Material Housing
• for article number: 7.8865, 7.8964
• Manufacturer: FACET

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Length [mm]: 48.8
• Height [mm]: 40.6
• Pressure [bar]: 0.2
• Colour: black
• Number of pins: 4
• Guarantee: 3 years guarantee
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Weight [kg]: 0.03
• Material: Plastic
• Socket colour: black
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV164

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Length [mm]: 446
• Oxygen Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-CT-012
• Manufacturer: NTY
• Name: NTY ESL-CT-012

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Number of pins: 2
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 F20 07-
• Manufacturer: BRM

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 1920LS
• Manufacturer: MEAT&DORIA

• Number of connectors: 2
• Weight [kg]: 0.037
• for OE number: 5946.31
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: Square
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114411

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV612
• Manufacturer: ESEN SKV

• Fitting Depth [mm]: 20.2
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP159.02
• Manufacturer: SNR

• Number of pins: 4
• Pressure from [kPA]: 21
• Manufacturer: DLP

Name: CZUJNIK CI—N. POWIETRZA PEUGEOT 2008, 207 208, 3008, 308, 5008 PARTNER 07-

• Engine Code: 5FS (EP6C)
• Colour: black
• Number of pins: 2
• Manufacturer: VDO

• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 20
• Supplementary Article/Info 2: without cable
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Number of pins: 4
• Pressure from [kPA]: 22
• Pressure to [kPA]: 107
• Manufacturer: FAE

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Manufacturer: VDO

• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Alternative Repair Kit: 550698
• Manufacturer: ERA

• Version: IAM
• Manufacturer: METZGER

• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: 5FS (EP6C)
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.018
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 536
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV062

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.018
• Name: SW 33 10 1748
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 570
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV703

• Oxygen Sensor: Regulating Sensor
• Fabrication Number: ESL-CT-008
• Manufacturer: NTY
• Name: NTY ESL-CT-008

• Engine Code: 5FS (EP6C)
• Fitting Position: after catalytic converter
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 480
• for OE number: 11787548961
• Manufacturer: MEAT&DORIA

Manufacturer: METZGER

• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 450
• Connector Shape: angular
• Conductor Number: 4
• Thread Size: M18 x 1,5
• Cable Length [mm]: 330
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: after catalytic converter
• Cable Length [mm]: 450
• Oxygen Sensor: Planar Sensor, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Oxygen Sensor: Heated
• Length [mm]: 450
• Number of pins: 4
• Technical Information Number: Universal 77004
• Socket colour: blue
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Length [mm]: 640
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Fitting Position: Exhaust Manifold
• Number of pins: 5
• Cable Length [mm]: 570
• Quality: OE EQUIVALENT
• for OE number: 1618HG
• Name: SONDA LAMBDA BMW 1 05-
• Manufacturer: MD

• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Weight [kg]: 0.092
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: A0035427018
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 290
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Weight [kg]: 0.092
• Name: SW 33 10 4185
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 640
• Number of pins: 6
• Total Length [mm]: 780
• Manufacturer: ERA

• Engine Code: 5FS (EP6C)
• Fitting Position: before catalytic converter
• Switching Capacity [W]: 7.5
• Length [mm]: 320
• Cable Length [mm]: 300
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.463
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: 5FS (EP6C)
• Fitting Position: before catalytic converter
• Length [mm]: 320
• Cable Length [mm]: 300
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Broadband Oxygen Sensor, Heated
• Conductor Number: 5
• Cable Length [mm]: 300
• Thread Size: M18 x 150
• Number of pins: 6
• Fitting Position: before catalytic converter
• Name: SONDA LAMBDA FIAT DOBLO/ CITROEN C4 1,4-2,0 01-
• Manufacturer: PIE

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 300
• Number of pins: 6
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 320
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for OE number: 0035427018
• Manufacturer: MEAT&DORIA

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Fitting Depth [mm]: 20.2
• Supplementary Article/Info 2: with seal ring