• Number of connectors: 2
• Colour: green
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Housing Colour: green
• Manufacturer: KAMOKA

• Fabrication Number: ECT-CT-003
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Socket colour: green
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with quick coupling
• Sensor Type: NTC Sensor
• Manufacturer: FAST

• Fabrication Number: ECT-FR-00
• Manufacturer: NTY

• Engine Code: RHR (DW10BTED4)
• Transmission Type: Manual Transmission
• Fitted Diameter [mm]: 20
• Connector Shape: rectangular
• Colour Coding: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: RHR (DW10BTED4)
• Number of pins: 2
• Manufacturer: KAVO PARTS

• Engine Code: RHR (DW10BTED4)
• Colour: green
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0137
• Additional information: 21-0137

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 9632562080
• Piirangutega toode/piirangu info 2: koos osadega
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Cable Length [mm]: 300
• Observe service information:
• Fabrication Number: ECT-PE-000
• Manufacturer: NTY
• Name: NTY ECT-PE-000

• Engine Code: RHR (DW10BTED4)
• Housing Type: Synthetic Material Housing
• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Number of pins: 2
• Housing Colour: green
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC
• Lisainfo: 55138 AIC
• Additional information: 55138 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 1920GJ, 9643695780, 3M5Q9E731AA
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Fabrication Number: ECP-CT-010
• Manufacturer: NTY

• Engine Code: RHR (DW10BTED4)
• Colour: green
• Housing Type: Synthetic Material Housing
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-292
• Lisainfo: 1-830-292

for article number: 1.880.486, 1.880.708, 1.880.734, 1.880.747, 1.880.748, 1.880.790

• Engine Code: RHR (DW10BTED4)
• Colour: green
• Housing Type: Synthetic Material Housing
• for article number: 7.8486, 7.8708, 7.8734, 7.8747, 7.8748, 7.8790
• Manufacturer: FACET

• Block Separation:
• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

Engine Code: RHR (DW10BTED4), AHX (DW10FD), AHV (DW10FD), AHS (DW10FD)

• Thread Size: M12x1,5
• Spanner Size: 19
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Socket colour: green
• Voltage [V]: 12
• Manufacturer: FAST

• Engine Code: RHR (DW10BTED4)
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.018
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12x1.25
• Spanner Size: 19
• Manufacturer: FAST

• Thread Size: 20 mm
• Number of pins: 2
• Inner Diameter [mm]: 8.5
• Outer Diameter [mm]: 25.5
• Manufacturer: ERA

• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Name: NI 207021
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: RHR (DW10BTED4)
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 300
• Observe service information:
• Number of pins: 2
• Name: Andur,v„listemperatuur
• Manufacturer: MAX

• Housing Type: Synthetic Material Housing
• Housing Colour: green
• Number of pins: 2
• Spanner Size: 0
• Name: DE TS10277
• Manufacturer: DELPHI

• Mounting Type: Plugged
• Voltage [V]: 12
• Diameter [mm]: 25.4
• Length [mm]: 53
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: green
• Housing Type: Synthetic Material Housing
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: FAST

• Engine Code: RHR (DW10BTED4)
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Lisainfo: SW 62 93 6038
• Additional information: SW 62 93 6038

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of circuits: 2
• Cable Length [mm]: 300
• Weight [kg]: 0.08
• Observe service information:
• Name: Andur,v„listemperatuur
• Manufacturer: FEB
• Additional information: FE107141
• Lisainfo: FE107141

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RHR (DW10BTED4)
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Engine Code: RHR (DW10BTED4), DW10BTED4
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: RHR (DW10BTED4), DW10BTED4
• Manufacturer: FACET

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Engine Code: RHR (DW10BTED4)
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year from: 03.2012
• Construction Year to: 09.2015
• Spanner Size: 20
• Fastening Type: Plug-on
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VAL

• Engine Code: RHR (DW10BTED4)
• Manufacturer: NRF

• Engine Code: DW10CTED4
• Number of pins: 3
• Sensor Type: Hall Sensor
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HEL

Name: CZUJNIK POO½ENIA WAU KORB. PEUGEOT 3008 2,0HDI 11-

• Fabrication Number: ECT-CT-007
• Manufacturer: NTY

Fabrication Number: EPO-PE-001

• Engine Code: RHR (DW10BTED4)
• for OE number: 1920GJ
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Diameter [mm]: 100
• Width [mm]: 9.8
• SVHC: No SVHC present!
• Manufacturer: INA NAPINACZE
• Lisainfo: 544009510
• Additional information: 544009510

• Engine Code: RHR (DW10BTED4)
• for OE number: 0515.T7
• Name: ANDUR, VŽNTVOLL
• Manufacturer: COT

• Number of pins: 3
• Fabrication Number: EPO-CT-006

• Resistor Type: Hall Sensor
• Manufacturer: VERNET

• Engine Code: DW10CTED4
• Manufacturer: NRF

• Engine Code: RHR (DW10BTED4)
• Transmission ID: BVM, BVM6
• Block Separation:
• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

Exhaust System: with soot particulate filter, without soot particulate filter

• Number of pins: 3
• for OE number: 1920GJ
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 00001920GJ
• Manufacturer: MEAT&DORIA

• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CKP159.04
• Manufacturer: SNR

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: FAST

• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• for OE number: 1 231 925, 1920 GJ, 8653703, 9643695780
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DW10BTED4
• Voltage [V]: 12
• Sensor Type: Impulse Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• Name: CZUJNIK POO½ENIA WAU KORB. PEUGEOT
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Name: VA 366727
• Manufacturer: VALEO

• Engine Code: DW10FD
• Number of pins: 3
• Name: DE SS12305-12B1
• Manufacturer: DELPHI

• Engine Code: RHR (DW10BTED4)
• Transmission Type: Manual Transmission
• Length [mm]: 75
• Width [mm]: 47
• Number of connectors: 3
• Weight [kg]: 0.27
• for OE number: 1920.GJ
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 3
• Manufacturer: ERA

• Engine Code: DW10BTED4
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: AHX (DW10FD), AHV (DW10FD), AHS (DW10FD)
• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Engine Code: RHR (DW10BTED4)
• Transmission Type: Manual Transmission
• Length [mm]: 75
• Width [mm]: 47
• Number of connectors: 3
• Weight [kg]: 0.27
• for OE number: 1920.GJ
• Name: SW 62 93 1200
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

Engine Code: RHA, RHD

• Engine Code: DW10CTED4
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11332

• Engine Code: DW10CTED4
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Length [mm]: 169
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 128
• Number of pins: 3
• Weight [kg]: 0.13
• Name: Andur,Mootoriolitase
• Manufacturer: VAL

• Engine Code: AHS (DW10FD)
• Construction Year from: 01.2013
• Manufacturer: BOSCH

• Engine Code: RHR (DW10BTED4)
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: ERA

• Always compare old and new part (in particular OE No.):
• Resistor [Ohm]: 3
• Ambient temperature from [°C]: 20
• Fitting Position: Exterior Mirror
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• Number of circuits: 2
• Cable Length [mm]: 300
• Cable Cross Section [mm²]: 0.3
• Manufacturer: METZGER

Technical Information: Originally, sensors with reversed temperature characteristics were installed under the OE reference 6445F9 and 6445JS. After replacing parts, an outside temperature that is too high is displayed.

• Construction Year from: 03.2012
• Construction Year to: 09.2018
• Name: ANDUR,SALONGITEMPERATUUR
• Manufacturer: VAL

• Engine Code: DW10BTED4
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO