Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Transmission Type: Manual Transmission
-
Transmission ID: MC,
MCE, ML6CL - Quantity per packing unit: 10
- Material: Copper
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Transmission ID: MC,
MCE, ML6CL - Transmission Type: Manual Transmission
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Material: Copper
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 25
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2.1
- Material: Copper
- Shape: A Shape
- Alternative Repair Kit: 505.540
- Manufacturer: ELRING
- Additional information: 108.502 ELRING
- Lisainfo: 108.502 ELRING
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 20
- Material: Copper
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 10.5
- Outer Diameter [mm]: 20.5
- Material: Copper
- Thickness [mm]: 2
- Manufacturer: 3RG
- Material: Copper
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- DIN/ISO: 7603
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M10 x 1,
25 - Weight [kg]: 0.02
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Manufacturer: 3RG
-
Engine Code: BHX
(DV6FC) - Thickness [mm]: 2
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Manufacturer: AJUSA
- Fitting Position: on transmission housing
- Transmission Type: Manual Transmission
-
Transmission ID: MC,
MCE, ML6CL - Quantity per packing unit: 5
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 19
-
Thread Size: M16 x 1,
50 - Manufacturer: 3RG
- Quantity per packing unit: 5
- Thread Size: M 10
- Thread Pitch [mm]: 1.25
- Length [mm]: 13
- Bolt Head-/Nut Design: Male Hex
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: on transmission housing,
engine sided -
Transmission ID: MC,
MCE, ML6CL - Transmission Type: Manual Transmission
- Quantity per packing unit: 5
- for OE number: 016393
-
Article number of recommended accessories: V25-
0583 - Length [mm]: 12
-
External Thread [mm]: M16 x 1,
5 - Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
-
Thread Size: M16 x 1,
5 - Required quantity: 1
- Thread Length [mm]: 12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Additionally required articles (article numbers): 746.520.100
- Manufacturer: FA1 FISCHER
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Quantity per packing unit: 10
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Thread Length [mm]: 15
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M10x1,
25x13 - Spanner Size: 21 mm
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: with seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: DRM
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Alternative Repair Kit: 877.930
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Inner Diameter [mm]: 10.2
- Material: Copper
- Outer Diameter [mm]: 20.5
- Thickness [mm]: 2
- Packing Type: Blister Pack
- Name: COU 005696S
- Manufacturer: CORTECO
- Quantity per packing unit: 5
- Required quantity: 1
- Thread Length [mm]: 12
- Thread Pitch [mm]: 1.5
-
External Thread [mm]: M16 x 1,
5 -
Surface: Zinc-
coated - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M 10 x 1,
25 x 12, 5 - Length [mm]: 18
- Packing Type: Blister Pack
- Spanner Size: 21
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: COT
- Quantity per packing unit: 5
-
Surface: Zinc-
coated - Thread Length [mm]: 17
- Supplementary Article/Info 2: with seal ring
- Thread Size: M16
- Spanner Size: 21
- Required quantity: 1
- Bolt Head-/Nut Design: Hexagon Socket
- Thread Pitch [mm]: 1.5
- Fitting Position: Oil Sump
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 19
-
Thread Size: M16 x 1,
50 - Manufacturer: 3RG
- Length [mm]: 20
- Outer Diameter [mm]: 25
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 17
- Quality/ Grade: 8.8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Surface: Coated
- Screw length below head [mm]: 17
- Weight [kg]: 0.116
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 20
- Jämedus/Tugevus (mm): 2
-
Kuju: A-
kuju - Materjal: Vask
- valikuliselt:
- Name: Rongastihend
- Manufacturer: FIS
- Quantity per packing unit: 10
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 21
- Jämedus/Tugevus (mm): 2
-
Kuju: A-
kuju - Materjal: Vask
- valikuliselt:
- Quantity per packing unit: 100
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 21
- Jämedus/Tugevus (mm): 2
-
Kuju: A-
kuju - Materjal: Vask
- Manufacturer: FIS
Name: PODKADKA,USZCZELKA MIEDZIANA CU 10,00 X 21,00 X 2,00 (OPAKOWANIE 100 SZT.)
- Quantity per packing unit: 100
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 20
- Jämedus/Tugevus (mm): 2
-
Kuju: A-
kuju - Materjal: Vask
- Manufacturer: FA1 FISCHER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks