Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660016
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25026 MD
- Lisainfo: 25026 MD
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660002
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25002 MD
- Lisainfo: 25002 MD
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- short version:
- Number of circuits: 1
- Supplementary Article/Info 2: with multi plug
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- Number of circuits: 1
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Piirangutega toode/piirangu info: koos lisadega
- Pistikkontaktide arv: 10
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 10
-
Kaal (kg): 0,
06 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 53SKV137
- Manufacturer: ESEN SKV
Manufacturer: FAST
Manufacturer: FAST
- Cable Length [mm]: 100
- Supplementary Article/Info 2: without bellow
- Number of circuits: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 200
- Supplementary Article/Info 2: without bellow
- Number of circuits: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Between interior blower and series resistor
-
Manufacturer Restriction: Alfa Romeo,
Fiat, Opel - Number of pins: 5
- Number of occupied pins: 5
- Supplementary Article/Supplementary Info: with socket housing
- Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Cable Length [mm]: 150
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- for OE number: 55702407
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondi kmpl, salongi soojapuhur(mootorieelsoojendus)
- Ülekandeliinide arv: 2
- Kaablipikkus (mm): 100
-
Piirangutega toode/piirangu info: surve-
pressliidesega - Pistikukatte kuju: nurgeline
- Kaabli ristlõige alates [mm²]: 4
- Kaabli ristlõige kuni [mm²]: 4
- juhtmeisolatsiooni materjal: Silikoon
-
Materjal: CuSn
(vask- tina) - Manufacturer: METZGER
- Installatsiooni pool: taga paremal
- Kaablipikkus (mm): 180
- Piirangutega toode/piirangu info: Pistikukomplektiga
- Kaal (g): 36
- Piirangutega toode/piirangu info 2: koos kaitsevoolikuga
- Ülekandeliinide arv: 6
- Manufacturer: FAST
- Installatsiooni pool: taga vasakul
- Kaablipikkus (mm): 180
- Piirangutega toode/piirangu info: Pistikukomplektiga
- Kaal (g): 38
- Piirangutega toode/piirangu info 2: koos kaitsevoolikuga
- Ülekandeliinide arv: 6
- Manufacturer: FAST
- Fitting Position: Injector Nozzle
- Cable Length [mm]: 500
- Supplementary Article/Supplementary Info: with shrink connector
- Number of circuits: 2
- Quantity: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 00006450XR
- Manufacturer: MEAT & DORIA
- Fitting Position: both sides
-
only in connection with: 20-
11333/ 34- 15- 2 - Manufacturer: TYC
- for OE number: 0055702441
- Manufacturer: MEAT&DORIA
-
Fitting Position: Left Front,
Right Front, at headlight - Cable Length [mm]: 200
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- Plug Type: Round Plug
- Number of circuits: 8
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: K68094679AA
- Manufacturer: MEAT&DORIA
- Ülekandeliinide arv: 5
- Kaablipikkus (mm): 100
- Installatsiooni pool: sees
-
Piirangutega toode/piirangu info: surve-
pressliidesega - Pistikukatte kuju: nurgeline
-
Kaabli ristlõige alates [mm²]: 1,
5 -
Kaabli ristlõige kuni [mm²]: 2,
5 - juhtmeisolatsiooni materjal: Silikoon
-
Materjal: CuSn
(vask- tina) - Toode tuleb kindlaks määrata sõidukil või mootoril:
- soovitava lisavarustuse artiklinumber: 0917108
- Manufacturer: METZGER
- Installatsiooni pool: sees
- Pistikukatte kuju: nurgeline
- juhtmeisolatsiooni materjal: Silikoon
-
Piirangutega toode/piirangu info: surve-
pressliidesega - Ülekandeliinide arv: 5
- Kaablipikkus (mm): 200
-
Kaabli ristlõige alates [mm²]: 1,
5 - Kaabli ristlõige kuni [mm²]: 4
-
Materjal: CuSn
(vask- tina) - Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks