Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660016
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25026 MD
- Lisainfo: 25026 MD
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660002
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25002 MD
- Lisainfo: 25002 MD
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- short version:
- Number of circuits: 1
- Supplementary Article/Info 2: with multi plug
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- Number of circuits: 1
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Supplementary Info: with accessories
- Number of pins: 10
- Guarantee: 3 years guarantee
- Number of circuits: 10
- Weight [kg]: 0.06
- Always compare old and new part (in particular OE No.):
- Name: CE 53SKV137
- Manufacturer: ESEN SKV
Manufacturer: FAST
Manufacturer: FAST
- Cable Length [mm]: 200
- Supplementary Article/Info 2: without bellow
- Number of circuits: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Between interior blower and series resistor
-
Manufacturer Restriction: Alfa Romeo,
Fiat, Opel - Number of pins: 5
- Number of occupied pins: 5
- Supplementary Article/Supplementary Info: with socket housing
- Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Cable Length [mm]: 150
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- for OE number: 55702407
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondi kmpl, salongi soojapuhur(mootorieelsoojendus)
- Number of circuits: 2
- Cable Length [mm]: 100
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Connector Shape: angular
- Cable cross-section from [mm²]: 4
- Cable cross-section to [mm²]: 4
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Manufacturer: METZGER
- Fitting Position: Right Rear
- Cable Length [mm]: 180
- Supplementary Article/Supplementary Info: with plug insert
- Weight [g]: 36
- Supplementary Article/Info 2: with protection hose
- Number of circuits: 6
- Manufacturer: FAST
- Fitting Position: Left Rear
- Cable Length [mm]: 180
- Supplementary Article/Supplementary Info: with plug insert
- Weight [g]: 38
- Supplementary Article/Info 2: with protection hose
- Number of circuits: 6
- Manufacturer: FAST
- Fitting Position: Injector Nozzle
- Cable Length [mm]: 500
- Supplementary Article/Supplementary Info: with shrink connector
- Number of circuits: 2
- Quantity: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 00006450XR
- Manufacturer: MEAT & DORIA
- Fitting Position: both sides
-
only in connection with: 20-
11333/ 34- 15- 2 - Manufacturer: TYC
-
Fitting Position: Left Front,
Right Front, at headlight - Cable Length [mm]: 200
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- Plug Type: Round Plug
- Number of circuits: 8
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 46723713
- Manufacturer: MEAT&DORIA
- Number of circuits: 5
- Cable Length [mm]: 100
- Fitting Position: inner
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Connector Shape: angular
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Product must be determined on the vehicle or the motor:
- Article number of recommended accessories: 0917108
- Manufacturer: METZGER
- Fitting Position: inner
- Connector Shape: angular
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Number of circuits: 5
- Cable Length [mm]: 200
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 4
-
Material: CuSn
(copper- tin) - Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks