• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Length [mm]: 54.7
• Weight [kg]: 0.029
• Socket colour: grey
• Supplementary Article/Supplementary Info: with seal rings
• Number of pins: 2
• Number of connectors: 2
• Manufacturer: METALCAUCHO

• Colour: grey
• Supplementary Article/Supplementary Info: with gasket/seal
• Connector type: ohne Gewinde
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: 4HH (P22DTE), P22DTE
• Spanner Size: 19
• for article number: 1.879.948, 1.879.949, 1.879.950
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: EP 1.830.285
• Lisainfo: EP 1.830.285

• Engine Code: 4HH (P22DTE), P22DTE
• Spanner Size: 19
• for article number: 7.7948, 7.7949, 7.7950
• Manufacturer: FACET

• Engine Code: 4HH (P22DTE)
• Required quantity: 1
• Corresponds to the original part in colour: green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: 4HH (P22DTE)
• Required quantity: 1
• Corresponds to the original part in colour: green
• Manufacturer: FACET

• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Connector Shape: rectangular
• Number of mounting bores: 1
• for OE number: 1811604
• Manufacturer: DELLO AUTOMEGA

• Corresponds to the original part in colour: green
• Manufacturer: FAST

• Fabrication Number: ECM-CT-005
• Manufacturer: NTY

Lisainfo: ENG. 2.2D/2.4D/3.2D CITROEN JUMPER 06-, FIAT DUCATO 06-, FORD TRANSIT 06-, PEUGEOT BOXER 06- / (4 PIN) Additional information: ENG. 2.2D/2.4D/3.2D CITROEN JUMPER 06-, FIAT DUCATO 06-, FORD TRANSIT 06-, PEUGEOT BOXER 06- / (4 PIN)

• Pressure from [kPA]: 10
• Pressure to [kPA]: 307
• Fabrication Number: ECM-FR-005
• Manufacturer: NTY

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV260

• Number of pins: 3
• Connector Shape: oval
• Socket colour: grey
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 26.5
• Number of mounting bores: 1
• for OE number: LR004492
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV142
• Manufacturer: ESEN SKV

• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pressure from [kPA]: 20
• Pressure to [kPA]: 30
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 26.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 3
• Manufacturer: JPN

• Number of pins: 4
• Manufacturer: JPN

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: grey
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ¤DU CITROEN JUMPER 06-

• Construction Year from: 10.2011
• Number of connectors: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Fabrication Number: ECS-FR-002
• Manufacturer: NTY

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Height [mm]: 26.5
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109321
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Engine Code: 4HH (P22DTE)
• Voltage [V]: 12
• Corresponds to the original part in colour: smoke grey
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: P22DTE
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Number of pins: 3
• Pressure from [kPA]: 27
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Number of connectors: 3
• Weight [kg]: 0.021
• for OE number: 1 913 600
• Name: SW 33 10 2195
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2011
• Construction Year to: 12.2015
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV654
• Manufacturer: ESEN SKV

• Number of pins: 3
• Colour: grey
• Manufacturer: METZGER

• Housing Colour: black
• Vehicle Equipment: for vehicles with diesel soot filter
• Connector Shape: oval
• Number of pins: 3
• Fitting Position: after soot particulate filter
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 75,000
• for OE number: 1600077
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Number of connectors: 3
• Weight [kg]: 0.021
• for OE number: 1 913 600
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure to [kPA]: 308
• Manufacturer: FAST

• Engine Code: 4HH (P22DTE)
• Sensor Type: Piezoelectric Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• for OE number: 1 516 668
• Fabrication Number: EPP-FR-005
• Manufacturer: NTY

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV188
• Manufacturer: ESEN SKV

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Construction Year from: 06.2011
• Construction Year to: 12.2015
• Manufacturer: BOSCH

• Engine Code: 4HH (P22DTE), P22DTE
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 70
• Output Voltage, from [V]: 0.986
• Output Voltage, up to [V]: 4.202
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 4HH (P22DTE), P22DTE
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 70
• Output Voltage, from [V]: 0.986
• Output Voltage, up to [V]: 4.202
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Fabrication Number: EFP-CT-000
• Manufacturer: NTY
• Name: NTY EFP-CT-000

• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• Number of connectors: 3
• Manufacturer: JPN

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV590
• Manufacturer: ESEN SKV

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV591
• Manufacturer: ESEN SKV

• Engine Code: 4HH (P22DTE)
• Quality class: PJ
• Name: Air flow sensor

• for OE number: 1570.P1
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV623
• Manufacturer: ESEN SKV

• Engine Code: 4HH (P22DTE), P22DTE
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 308
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.244
• Manufacturer: EPS

• Engine Code: 4HH (P22DTE), P22DTE
• Pressure from [kPA]: 10
• Pressure to [kPA]: 308
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: FAE

Manufacturer: DR MOTOR

Manufacturer: FAST

• for OE number: 1600077
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Engine Code: 4HH (P22DTE)
• Pressure from [kPA]: 10
• Pressure to [kPA]: 307.5
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP013112081
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: MAX

• Exhaust System: before soot particulate filter
• Block Separation:
• Fitting Position: after soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 0.13
• Name: Andur, heitgaasisurve
• Manufacturer: DLP

• Housing Type: without housing
• Number of pins: 4
• Recommended additional repairs: Air Filter
• Supplementary Article/Info 2: Can only be fitted with original mounting
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 4HH (P22DTE)
• Fitting Position: after soot particulate filter
• for OE number: 1 600 077
• Number of pins: 3
• Connector Shape: oval
• Number of circuits: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: C2G2675
• Manufacturer: MEAT & DORIA

• Number of pins: 2
• Connector Shape: rectangular
• Fabrication Number: EGT-FR-004
• Cable Length [mm]: 350
• Manufacturer: NTY
• Name: NTY EGT-FR-004

• Fuel Mixture Formation: Common Rail (CR)
• Manufacturer: FAST

Manufacturer: FAST

• Fuel Mixture Formation: Common Rail (CR)
• Manufacturer: FAST

• Fuel Mixture Formation: Common Rail (CR)
• for OE number: 215810015500
• Manufacturer: MEAT & DORIA

• Colour: blue
• Fabrication Number: EGT-FR-002
• Cable Length [mm]: 800
• Manufacturer: NTY

• Engine Code: P22DTE
• Exhaust System: before soot particulate filter
• Number of circuits: 2
• Length [mm]: 835
• Manufacturer: ASHIKA
• Lisainfo: 161-00-0600
• Additional information: 161-00-0600

• Engine Code: 4HH (P22DTE)
• Emission Standard: Euro 5
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 75
• Number of pins: 3
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 307.5
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Overall Length [mm]: 400
• Cable Length [mm]: 210
• Number of pins: 2
• Manufacturer: FAST

• Emission Standard: Euro 5
• Number of pins: 3
• Supplementary Article/Info 2: without connection line
• Fitting Position: after soot particulate filter
• Version: IAM
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

Manufacturer: FAST

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Length [mm]: 500
• Number of circuits: 5
• Fabrication Number: ESL-FR-005
• Manufacturer: NTY

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 800
• Overall Length [mm]: 930
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Construction Year from: 09.2012
• Engine Code: 4HH
• Exhaust System: after soot particulate filter
• Voltage [V]: 12
• Cable Length [mm]: 800
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV253
• Manufacturer: ESEN SKV

• Housing Type: without housing
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: FAST

• Length [mm]: 75
• Guarantee: 3 years guarantee
• for OE number: 1570.P1
• Number of pins: 3
• Fuel Mixture Formation: Direct Injection
• Voltage [V]: 12
• Thread Size: M12x1,5
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Thread Size: M18 x 1,5
• Spanner Size: 27
• Number of pins: 3
• Name: Andur,ktuserohk
• Manufacturer: MEY

Manufacturer: MAGNETI MARELLI

• Fuel Mixture Formation: Direct Injection
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M14x1.5
• Cable Length [mm]: 510
• Sensor Type: NTC Sensor, Closed-type Sensor
• Manufacturer: FAST

• Construction Year from: 06.2011
• Construction Year to: 12.2015
• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Alternatively:
• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10255-12B1