• for OE number: 9636777180
• Manufacturer: SASIC

• OE-numbri jaoks: 9639381480
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos integreeritud õhutemp.anduriga
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 117
• Seerianumber: ECM-PE-000
• Manufacturer: NTY
• Name: NTY ECM-PE-000

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Seerianumber: ESS-BM-002

• Construction Year to: 06.2009
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Engine Code: KFV (TU3A), TU3A
• Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET
• Name: EP 1.830.276

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KFV (TU3A), TU3A
• Required quantity: 1
• Name: EP 1.957.165
• Manufacturer: EPS

• Engine Code: KFV (TU3A), TU3A
• Colour: blue
• Housing Type: Aluminium Housing
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year to: 06.2009
• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Required quantity: 1
• Manufacturer: BREMI

• Construction Year to: 06.2009
• Colour: green
• Manufacturer: BOSCH

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Length [mm]: 410
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-CT-003
• Manufacturer: NTY
• Name: NTY ESL-CT-003

• Length [mm]: 555
• Transmission Type: Manual Transmission
• Fabrication Number: ESL-CT-004
• Manufacturer: NTY
• Name: NTY ESL-CT-004

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 4
• Pressure from [kPA]: 14
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP
• Additional information: PS10128 DEL
• Lisainfo: PS10128 DEL

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 96 393 814 80
• Name: SW 62 93 7880
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2009
• Manufacturer: BOSCH
• Name: BS 0261230344

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of connectors: 4
• Length [mm]: 400
• Manufacturer: VERNET

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• for OE number: 96 393 814 80
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2009
• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: KFV (TU3A)
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Length [mm]: 536
• Name: Lambda andur
• Manufacturer: MAX

• Required quantity: 1
• Engine Code: TU3A
• Vehicle type: 207
• Number of pins: 4
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400301
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 380
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 06.2009
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Conductor Number: 4
• Cable Length [mm]: 450
• Thread Size: M18 x 1,5
• Length [mm]: 570
• Version: ZR-PLANAR
• Weight [kg]: 0.143
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 450
• Connector Shape: angular
• Conductor Number: 4
• Thread Size: M18 x 1,5
• Cable Length [mm]: 330
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Weight [kg]: 0.13
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Number of circuits: 4
• Socket colour: green
• Connector Shape: rectangular
• Thread Size: M18 x 1,5
• Weight [kg]: 0.138
• for OE number: 96 369 687 80
• Cable Length [mm]: 500
• Length [mm]: 600
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KFV (TU3A), TU3A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Switching Capacity [W]: 15
• Length [mm]: 410
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.068
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES20258-12B1

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Required quantity: 1
• Engine Code: TU3A
• Vehicle type: 207
• Cable Length [mm]: 570
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Engine Code: TU3A
• Vehicle type: 207
• Cable Length [mm]: 530
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 07.2008, 01.2012
• Construction Year to: 12.2012
• Vehicle type: 207, 207+
• Vehicle Equipment: for vehicles with cruise control
• for RPO number from: 11557
• Block Separation:
• Supplementary Article/Info 2: Aluminium Pedal Cover
• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 07.2008, 01.2012
• Construction Year to: 12.2012
• Vehicle type: 207, 207+
• Vehicle Equipment: for vehicles with cruise control
• for RPO number from: 11557
• Block Separation:
• Supplementary Article/Info 2: Rubber pedal pad
• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 07.2008, 01.2012
• Construction Year to: 12.2012
• Vehicle type: 207, 207+
• Transmission Type: 5-Speed Manual Transmission, Manual Transmission
• Vehicle Equipment: for vehicles without cruise control
• for RPO number from: 11557
• Block Separation:
• Number of mounting bores: 3
• Number of pins: 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.