• Cable Length [mm]: 615
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-CH-005
• Manufacturer: NTY

• Sensor Type: Hall Sensor, Active sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: KAMOKA

• Cable Length [mm]: 600
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Connector Shape: rectangular
• Number of pins: 3
• Cable Length [mm]: 600
• for OE number: 1920 CP
• Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV311

• Fabrication Number: ECP-FT-004
• Manufacturer: NTY

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: MAGNETIMARELLI
• Cable Length [mm]: 615
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Transmission Type: Manual Transmission
• for OE number: SEN8E
• Manufacturer Restriction: Magneti Marelli
• Voltage [V]: 12
• Length [mm]: 395
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Engine Code: 8140.43S (F28DTCR)
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of connectors: 2
• Weight [kg]: 0.044
• Name: SW 33 10 3553
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Cable Length [mm]: 640
• Manufacturer: FAST

Manufacturer: NRF

• Manufacturer Restriction: MAGNETI MARELLI
• Transmission Type: 5-Speed Manual Transmission
• Transmission Code: MLGU
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 615
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

Manufacturer: FAST

• Cable Length [mm]: 560
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 34.5
• Weight [kg]: 0.066
• Operating Mode: Electric
• Alternative Repair Kit: 550064
• Resistor [kOhm]: 1.1
• Manufacturer: ERA

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

• Supplementary Article/Info 2: with cable
• Length [mm]: 510
• Height [mm]: 34.5
• Resistor [Ohm]: 1,100
• Number of connectors: 3
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Production date from: 21.05.2004
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 1826557
• Manufacturer: MEAT & DORIA

• Engine Number from: 0240163
• Number of pins: 2
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Socket colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles without diesel particulate filter (DPF) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. OPEL AGILA 1,0 03-
• Manufacturer: BRM

• Manufacturer Restriction: BOSCH
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Colour: black
• Cable Length [mm]: 460
• Number of pins: 3
• Fitting Depth [mm]: 34
• Weight [kg]: 0.062
• Resistor [kOhm]: 1.2
• Manufacturer: ERA

• Manufacturer Restriction: BOSCH
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 570
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Mounting Type: Bolted
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Number of mounting bores: 1
• Cable Length [mm]: 492
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with gaskets/seals
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358191111

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Depth [mm]: 24.1
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP158.02
• Manufacturer: SNR

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Number to: 0240162
• Block Separation:
• Length [mm]: 630
• Outer Diameter [mm]: 18
• Number of connectors: 3
• Cable Length [mm]: 560
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

Engine Features/Arrangement: for engines without exhaust gas recirculation, for engines with exhaust gas recirculation General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 0240163
• Manufacturer Restriction: MAGNETIMARELLI
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Cable Length [mm]: 525
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Cable Length [mm]: 415
• Number of pins: 3
• Name: DE SS11310
• Manufacturer: DELPHI

• Construction Year from: 01.2002
• Engine Code: F28TDCR
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 700
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: MAGNETIMARELLI
• Length [mm]: 615
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: 8140.43S (F28DTCR)
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: MAGNETIMARELLI
• Length [mm]: 615
• Manufacturer: FACET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer: FACET

• Construction Year from: 06.2004
• Length [mm]: 51.6
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: with cable
• Length [mm]: 640
• Height [mm]: 24
• Resistor [Ohm]: 1,000
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Cable Length [mm]: 530
• Fitting Depth [mm]: 34.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: BOSCH
• Length [mm]: 640
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Construction Year from: 06.2004
• Length [mm]: 52
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Corresponds to the original part in colour: anthracite
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009163921

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: BOSCH
• Length [mm]: 640
• Manufacturer: FACET

• Cable Length [mm]: 510
• Number of pins: 3
• Manufacturer: FAE

• Cable Length [mm]: 600
• Number of pins: 3
• Manufacturer: FAE

• Engine Code: F28TDCR
• for OE number: 1 319 158
• Colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable, with seal ring
• Connector Shape: oval
• Resistor [kOhm]: 320
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.