• Number of pins: 2
• Colour Coding: grey
• Manufacturer: JP GROUP A/S
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 1
• Switch Pressure [bar]: 0.35
• Thread Size: M 14x1,5
• Colour: black
• Supplementary Article/Supplementary Info: with gaskets/seals
• for article number: 2324051
• Version: OE
• Lisainfo: Oil Pressure Switch
• Additional information: Oil Pressure Switch

• Number of pins: 2
• Housing Colour: light blue
• Connector Shape: oval
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Length [mm]: 61
• Spanner Size: 19
• Manufacturer: KAMOKA

• Engine Code: 8140.43S (F28DTCR)
• Thread Size: M14x1.5
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO PARTS

• Engine Code: 8140.43S (F28DTCR)
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: 8140.43S (F28DTCR)
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Manufacturer: FACET

• Fabrication Number: ECT-CH-006
• Manufacturer: NTY

• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE
• Additional information: 12430 FAE
• Lisainfo: 12430 FAE

• Pressure [bar]: 0.3
• Thread Size: M 14 x 1,5
• for OE number: 1535416
• Manufacturer: MEAT&DORIA

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

Manufacturer: FAST

• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-CH-005
• Manufacturer: NTY

• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Thread Size: M14x1,50
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: MAG

• Connector Shape: rectangular
• Thread Pitch [mm]: 1.5
• Colour Coding: grey
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: FE12228
• Lisainfo: FE12228

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 615
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 8140.43S (F28DTCR)
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECP-FT-004
• Manufacturer: NTY

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 70 23 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Pressure [bar]: 0.3
• Combi Switch Function: Normally Closed Contact
• Thread Size: M14x1,5
• Spanner Size: 21
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6ZL003259601

• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 2
• Võtmekaugus: 22
• Keermemõõt: M16x1.5
• OE-numbri jaoks: 04837950
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 46462179
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF
• Additional information: 727005 NRF
• Lisainfo: 727005 NRF

• Number of pins: 2
• Socket colour: bright blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• for OE number: 46469865
• Manufacturer: MEAT&DORIA

• Switch Point [°C]: 107
• Thread Size: M16x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: 8140.43S (F28DTCR)
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Engine Code: 8140.43S (F28DTCR)
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Outer Diameter [mm]: 7.4
• Resistor [Ohm]: 2,080, 294
• Supplementary Article/Supplementary Info: with gasket/seal
• External Thread [mm]: 12
• Thread Pitch [mm]: 1.5
• Temperature range [°C]: 25, 80
• Mounting Type: Bolted
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black, white, light blue
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 8140.43S (F28DTCR)
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 7.8170, 7.8190
• Manufacturer: FACET

• Number of pins: 2
• Thread Size: M12x1,5
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 600
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Connector Shape: rectangular
• Number of pins: 3
• Cable Length [mm]: 600
• for OE number: 1920 CP
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV311

• Number of pins: 2
• Colour Coding: grey
• Packaging length [cm]: 3.5
• Packaging width [cm]: 6
• Packaging height [cm]: 3.5
• Weight [kg]: 0.026
• for OE number: 1338467, 1338C7, 90541937
• Manufacturer: AKSDASIS

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: MAGNETIMARELLI
• Cable Length [mm]: 615
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Transmission Type: Manual Transmission
• for OE number: SEN8E
• Manufacturer Restriction: Magneti Marelli
• Voltage [V]: 12
• Length [mm]: 395
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Engine Code: 8140.43S (F28DTCR)
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of connectors: 2
• Weight [kg]: 0.044
• Name: SW 33 10 3553
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 640
• Manufacturer: FAST

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 1826557
• Manufacturer: MEAT&DORIA

• Manufacturer Restriction: MAGNETI MARELLI
• Transmission Type: 5-Speed Manual Transmission
• Transmission Code: MLGU
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 615
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

Manufacturer: NRF

Manufacturer: FAST

• Cable Length [mm]: 560
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 34.5
• Weight [kg]: 0.066
• Operating Mode: Electric
• Alternative Repair Kit: 550064
• Resistor [kOhm]: 1.1
• Manufacturer: ERA

• Supplementary Article/Info 2: with cable
• Length [mm]: 510
• Height [mm]: 34.5
• Resistor [Ohm]: 1,100
• Number of connectors: 3
• Manufacturer: VERNET

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

• Production date from: 21.05.2004
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. OPEL AGILA 1,0 03-
• Manufacturer: BRM

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: 8140.43S (F28DTCR)
• Warn Temperature [°C]: 107
• Thread Size: M16x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Colour: black
• Cable Length [mm]: 460
• Number of pins: 3
• Fitting Depth [mm]: 34
• Weight [kg]: 0.062
• Resistor [kOhm]: 1.2
• Manufacturer: ERA

• Manufacturer Restriction: BOSCH
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 570
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Montaaživiis: kruvitud
• Pistikkontaktide arv: 3
• Anduritüüp: Induktiivandur
• Kinnitusaukude hulk: 1
• Kaablipikkus (mm): 492
• Piirangutega toode/piirangu info 2: koos kaabliga
• Piirangutega toode/piirangu info: koos tihenditega
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PU358191111

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Mounting Type: Bolted
• Voltage [V]: 12
• Switch: with circuit closer switch
• Temperature range from [°C]: 107
• Thread Size: M16x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

SVHC: 96-45-7; Imidazolidine-2-thione; (2-imidazoline-2-thiol), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Depth [mm]: 24.1
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP158.02
• Manufacturer: SNR

• Engine Number to: 0240162
• Block Separation:
• Length [mm]: 630
• Outer Diameter [mm]: 18
• Number of connectors: 3
• Cable Length [mm]: 560
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

Engine Features/Arrangement: for engines without exhaust gas recirculation, for engines with exhaust gas recirculation General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Number from: 0240163
• Manufacturer Restriction: MAGNETIMARELLI
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Cable Length [mm]: 525
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Cable Length [mm]: 415
• Number of pins: 3
• Name: DE SS11310
• Manufacturer: DELPHI

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 04.2002
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 700
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: MAGNETIMARELLI
• Length [mm]: 615
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer Restriction: MAGNETIMARELLI
• Length [mm]: 615
• Manufacturer: FACET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: 8140.43S (F28DTCR)
• Manufacturer: FACET

• Housing Type: with housing
• Fabrication Number: EPP-CT-006
• Manufacturer: NTY

• Engine Code: 8140.43S (F28DTCR)
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Chemical Properties: Oil resistant
• Number of pins: 1
• Cable Length [mm]: 80
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with copper casing, with protection hose
• Supplementary Article/Supplementary Info: with cable tie
• Temperature range from [°C]: -25
• Temperature range to [°C]: +125
• SVHC: No SVHC present!
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• Construction Year from: 06.2004
• Length [mm]: 51.6
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: with cable
• Length [mm]: 640
• Height [mm]: 24
• Resistor [Ohm]: 1,000
• Number of connectors: 3
• Manufacturer: VERNET

• Voltage [V]: 12
• Fabrication Number: EPP-SA-003
• Manufacturer: NTY