• Payload [kg]: 800, 1,000, 1,400
• Construction Year to: 04.2006
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Width [mm]: 48
• Lisainfo: Wheel Bearing Kit
• Additional information: Wheel Bearing Kit

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Fabrication Number: KLP-CT-018
• Manufacturer: NTY

• not for payload [kg]: 1,800
• Fitting Position: Front Axle both sides
• Width [mm]: 48
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Manufacturer: JPN

• Construction Year to: 04.2006
• Specification: 0.8-10-14Q
• Fitting Position: Front Axle
• Width [mm]: 48
• Inner Diameter [mm]: 49
• Outer Diameter 1 [mm]: 84
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Construction Year to: 04.2006
• Fitting Position: Rear Axle
• Width [mm]: 48
• Outer Diameter [mm]: 84
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Width [mm]: 48
• Manufacturer: FAST

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 48
• Outer Diameter 1 [mm]: 84
• Inner Diameter 1 [mm]: 49
• Manufacturer: GSP

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 936...
• Payload [kg]: 1,800
• Construction Year to: 04.2006
• Manufacturer: DELLO AUTOMEGA

• Payload [kg]: 1,000
• Fitting Position: Front Axle
• Width [mm]: 48
• Outer Diameter [mm]: 84
• Manufacturer: KAMOKA

• Payload [kg]: 1,800
• Fitting Position: Front Axle both sides
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: JPN

• Fitting Position: Rear Axle, Front Axle
• Block Separation:
• Payload [kg]: 1,000, 1,400
• for OE number: 13 475 270 80
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Payload to [kg]: 1,400
• Payload from [kg]: 1,000
• Block Separation:
• Vehicle Identification Number (VIN) from: 936###
• Payload [kg]: 1,800
• Inner Diameter 1 [mm]: 49
• Outer Diameter 1 [mm]: 84
• Weight [kg]: 1.14
• Width 1 [mm]: 48
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Diameter [mm]: 84
• Width [mm]: 48
• Weight [kg]: 0.85
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Tightening Torque [Nm]: 450
• Weight [g]: 1,190
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 3.33
• Bolt Hole Circle Ø 1 [mm]: 130
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 936-
• Payload [kg]: 1,800
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 48
• Outer Diameter 1 [mm]: 84
• Inner Diameter 1 [mm]: 49
• Manufacturer: GSP

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 161-
• Payload [kg]: 1,800
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 60
• Outer Diameter 1 [mm]: 90
• Inner Diameter 1 [mm]: 55
• Manufacturer: GSP

• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR /NTN-SNR/
• Name: SN R150.10

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRONT LR+FR LR+FR
• for OE number: 1606375080
• Inner Diameter [mm]: 49
• Width 1 [mm]: 48
• Number of mounting bores: 1
• Name: DA KWD1423
• Manufacturer: DAYCO

• Vehicle Identification Number (VIN) from: 93600000
• Payload [kg]: 1,800
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Width [mm]: 60
• Lisainfo: Wheel Bearing Kit
• Additional information: Wheel Bearing Kit

• Fitting Position: Front Axle
• Width [mm]: 60
• Outer Diameter [mm]: 90
• Manufacturer: KAMOKA

• Payload [kg]: 800, 1,000, 1,400
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 84
• Inner Diameter [mm]: 49
• Width [mm]: 48
• Supplementary Article/Info 2: with nut, with retaining ring
• Full Set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 93600000
• Payload [kg]: 1,800
• Fitting Position: Front Axle both sides
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: JPN

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 161
• Payload [kg]: 1,800
• Construction Year to: 04.2006
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter 1 [mm]: 90
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 60
• Outer Diameter 1 [mm]: 90
• Inner Diameter 1 [mm]: 55
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: GSP

• not for payload [kg]: 1,800
• Width [mm]: 48
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1
• Supplementary Article/Info 2: with retaining ring
• Supplementary Article/Supplementary Info: with axle nut
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2006
• Vehicle Identification Number (VIN) from: 936-
• Payload [kg]: 1,800
• Fitting Position: Front Axle
• Width [mm]: 60
• Outer Diameter [mm]: 90
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) from: 937
• Payload [kg]: 1,800
• Inner Diameter 1 [mm]: 55
• Outer Diameter 1 [mm]: 90
• Weight [kg]: 1.23
• Width 1 [mm]: 60
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Weight [kg]: 1.171
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Packaging height [cm]: 4.9
• Manufacturer: FEBEST

• Construction Year to: 04.2006
• Vehicle Identification Number (VIN) from: 161-
• Payload [kg]: 1,800
• Fitting Position: Front Axle
• Width [mm]: 60
• Outer Diameter [mm]: 90
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: VP Brazil
• for OE number: 1606374980
• Inner Diameter [mm]: 40
• Width 1 [mm]: 40
• Number of mounting bores: 1
• Name: DA KWD1490
• Manufacturer: DAYCO

• Fitting Position: Rear Axle, Front Axle
• Block Separation:
• Payload [kg]: 1,000, 1,400
• Width [mm]: 48
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Width [mm]: 60
• Weight [kg]: 1.61
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Packaging length [cm]: 9.2
• Packaging width [cm]: 9.2
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Weight [kg]: 1.34
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75
• Packaging length [cm]: 8.3
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: FAST

• Fitting Position: Front Axle
• Required quantity: 2
• Payload [kg]: 1,400, 800, 1,000
• Width [mm]: 48
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Manufacturer: SKF
• Name: SK VKBA3640

• Payload [kg]: 800, 1,000, 1,400
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Width [mm]: 48
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle
• Required quantity: 2
• Payload [kg]: 1,000, 1,400, 800
• Weight [kg]: 1.27
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.1
• Packaging height [cm]: 7.3
• Outer Diameter [mm]: 84
• Inner Diameter [mm]: 49
• Width [mm]: 48
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Payload [kg]: 1,800
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Required quantity: 2
• Width [mm]: 48
• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 84
• Name: SK VKBA3679
• Manufacturer: SKF

• Vehicle Identification Number (VIN) from: 161###
• Payload [kg]: 1,800
• Block Separation:
• Payload to [kg]: 1,400
• Payload from [kg]: 1,000
• Inner Diameter 1 [mm]: 55
• Outer Diameter 1 [mm]: 90
• Weight [kg]: 1.25
• Width 1 [mm]: 60
• Manufacturer: A.B.S.

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right

• Fitting Position: Front Axle
• Required quantity: 2
• Payload [kg]: 1,800
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: SKF
• Name: SK VKBA3690

• Fitting Position: Front Axle
• Width [mm]: 54
• Weight [kg]: 1.585
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Packaging length [cm]: 9.1
• Packaging width [cm]: 9.1
• Packaging height [cm]: 5.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Required quantity: 2
• Payload [kg]: 1,800
• Width [mm]: 60
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Manufacturer: SKF
• Name: SK VKBA3641

• Payload [kg]: 1,800
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Width [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713691150

• Payload [kg]: 1,800
• Fitting Position: Front Axle
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 90
• Width [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG