Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 25
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 27
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
036.400, 505.550, 505.540 - Manufacturer: ELRING
- Transmission Type: Manual Transmission
- Transmission ID: MLGU
- Quantity per packing unit: 10
- Material: Copper
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 10
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 27
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission ID: MLGU
- Transmission Type: Manual Transmission
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Material: Copper
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: 8140.43S
(F28DTCR) - Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Manufacturer: AJUSA
- Fitting Position: on transmission housing
- Transmission Type: Manual Transmission
- Transmission ID: MLGU
- Quantity per packing unit: 5
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 19
-
Thread Size: M16 x 1,
50 - Manufacturer: 3RG
- Quantity per packing unit: 6
- Weight [kg]: 0.03
-
Thread Size: M22x1,
5 - Weight [g]: 30
- Thread Length [mm]: 10
- Manufacturer: METALCAUCHO
-
Thread Size: M22x1,
5 - Length [mm]: 10
- Additionally required articles (article numbers): 846.760.100
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 12 mm
- Manufacturer: FA1 FISCHER
-
Fitting Position: on transmission housing,
engine sided - Transmission ID: MLGU
- Transmission Type: Manual Transmission
- Quantity per packing unit: 5
- for OE number: 016393
-
Article number of recommended accessories: V25-
0583 - Length [mm]: 12
-
External Thread [mm]: M16 x 1,
5 - Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
-
Thread Size: M16 x 1,
5 - Required quantity: 1
- Thread Length [mm]: 12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M22x1,
5 - Length [mm]: 10
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 12 mm
- Supplementary Article/Info 2: with seal ring
-
Name: KRUVI,
OLIVANN- AUTOMAATKIGUKAST - Manufacturer: FIS
-
Thread Size: M22 x 1,
50 - Thread Length [mm]: 18.3
- Spanner Size: 10
- Manufacturer: 3RG
- Quantity per packing unit: 5
- Required quantity: 1
- Thread Length [mm]: 12
- Thread Pitch [mm]: 1.5
-
External Thread [mm]: M16 x 1,
5 -
Surface: Zinc-
coated - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M22x1,
5x10 - Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 12 mm
- Alternative Repair Kit: 877.910
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
- Quantity per packing unit: 10
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 27
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
-
Thread Size: M22x1,
5x10 - Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 12 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Length [mm]: 19
-
Thread Size: M16 x 1,
50 - Manufacturer: 3RG
-
Thread Size: M 22 x 1,
50 - Packing Type: Blister Pack
- Supplementary Article/Info 2: with seal ring
- Manufacturer: CORTECO
- Name: COU 220133S
- Quantity per packing unit: 100
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 27
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Manufacturer: FIS
Name: PODKADKA,USZCZELKA MIEDZIANA CU 22,00 X 27,00 X 1,50 (OPAKOWANIE 100 SZT.)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks