• Fitting Position: Front Axle Left, Front Axle Right
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEYLE

Lisainfo: Track Control Arm

Lisainfo: Track Control Arm

• Vehicle Equipment Line/Variant: 1.0 - 1.4 T
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Right
• Cone Size [mm]: 16
• Material: Cast Iron
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm right

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• Vehicle Equipment Line/Variant: 1.0 - 1.4 T
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left
• Cone Size [mm]: 16
• Material: Cast Iron
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm left

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Cone Size [mm]: 19.3
• Fabrication Number: ZWD-CT-028
• paired article number: ZWD-CT-029
• Manufacturer: NTY

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Cone Size [mm]: 19.3
• Fabrication Number: ZWD-CT-029
• paired article number: ZWD-CT-028
• Manufacturer: NTY

• Vehicle Equipment Line/Variant: 1.8 T
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left
• Cone Size [mm]: 19.2
• Material: Cast Iron
• Rod/Strut: Push Rod
• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• Construction Year from: 02.2001
• Axle Load [kg]: 1,000, 1,400
• Colour: black
• Material: Cast Steel
• Article number of the recommended special tool: V99-1020
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Left, Lower Front Axle
• Axle alignment required after fitting:
• paired article number: V24-9630
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment Line/Variant: 1.8 T
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Right
• Cone Size [mm]: 19.2
• Material: Cast Iron
• Rod/Strut: Push Rod
• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• Quality class: PJ

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO02-
(kvaliteediklass: PJ)"

• Quality class: PJ

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO02-
(kvaliteediklass: PJ)"

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO02-
(kvaliteediklass: PJ)"

• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BOXER/JUMP/DUCATO02-
(kvaliteediklass: PJ)"

• Construction Year to: 01.2001
• Fitting Position: Front Axle Left, Lower
• paired article number: 49399453
• Control/Trailing Arm Type: Control Arm
• Name: COC 49399502
• Manufacturer: CORTECO

• Payload to [kg]: 1,400
• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 20
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Payload to [kg]: 1,400
• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 20
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Construction Year to: 01.2001
• Fitting Position: Left
• paired article number: 49399557
• Control/Trailing Arm Type: Control Arm
• Name: COC 49399931
• Manufacturer: CORTECO

• Fitting Position: Lower, Front Axle Right
• paired article number: S060385
• Cone Size [mm]: 18.9
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Lower, Front Axle Left
• paired article number: S060384
• Cone Size [mm]: 18.9
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP ZAWIESZENIE

• Construction Year to: 01.2001
• Fitting Position: Right
• paired article number: 49399931
• Control/Trailing Arm Type: Control Arm
• Name: COC 49399557
• Manufacturer: CORTECO

• Construction Year from: 02.2001
• Fitting Position: Left
• paired article number: 49399160
• Control/Trailing Arm Type: Control Arm
• Name: COC 49399076
• Manufacturer: CORTECO

• Fitting Position: Lower, Front Axle Left
• paired article number: S060382
• Cone Size [mm]: 16
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Fitting Position: Lower, Front Axle Right
• paired article number: S060383
• Cone Size [mm]: 16
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP ZAWIESZENIE

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• not for payload [kg]: 1,800
• paired article number: 12386
• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 7.101
• Supplementary Article/Supplementary Info: with rubber mounts, with holder
• Supplementary Article/Info 2: without ball joint
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Left, Lower
• Material: Cast Steel
• paired article number: TC1285
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 430
• Width [mm]: 420
• Height [mm]: 75
• Name: DE TC1284
• Manufacturer: DELPHI

• Construction Year from: 02.2001
• Fitting Position: Left, Lower
• paired article number: 49399102
• Control/Trailing Arm Type: Control Arm
• Name: COC 49399139
• Manufacturer: CORTECO

• Fitting Position: Lower, Front Axle Right
• Payload [kg]: 1,400, 1,000
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 323040
• Inner Diameter [mm]: 18.5
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS323041
• Manufacturer: SKF

• Construction Year from: 02.2001
• Fitting Position: Right, Lower
• paired article number: 49399139
• Control/Trailing Arm Type: Control Arm
• Name: COC 49399102
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right, Right, Lower
• Payload [kg]: 1,800
• Material: Cast Steel
• paired article number: TC1287
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 450
• Width [mm]: 420
• Height [mm]: 75
• Name: DE TC1288
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Left, Lower
• Payload [kg]: 1,800
• Material: Cast Steel
• paired article number: TC1288
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 450
• Width [mm]: 420
• Height [mm]: 75
• Manufacturer: DELPHI
• Name: DE TC1287

• Fitting Position: Lower Front Axle, Right
• Payload [kg]: 1,000, 1,400
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 20
• paired article number: JTC1013
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower Front Axle, Left
• Payload [kg]: 1,000, 1,400
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 20
• paired article number: JTC1012
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• suitable for rim size [inch]: 15
• Construction Year from: 02.2001
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• Cone Size [mm]: 16
• Supplementary Article/Info 2: without ball joint
• paired article number: 821 0859 10
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821085810

• Fitting Position: Front Axle Right
• suitable for rim size [inch]: 15
• Construction Year from: 02.2001
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• Cone Size [mm]: 16
• Supplementary Article/Info 2: without ball joint
• paired article number: 821 0858 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Right
• Cone Size [mm]: 19
• paired article number: FT15022
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Right
• Cone Size [mm]: 22
• paired article number: FT15024
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Lower Front Axle, Right
• Payload [kg]: 1,800
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 24
• paired article number: JTC1015
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower Front Axle, Left
• Payload [kg]: 1,800
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 24
• paired article number: JTC1014
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Right
• Cone Size [mm]: 24
• paired article number: FT15121
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Left
• Cone Size [mm]: 24
• paired article number: FT15120
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Left
• Cone Size [mm]: 20
• paired article number: FT15118
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Front Axle Left, Lower
• Payload [kg]: 1,000, 1,400
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 323041
• Inner Diameter [mm]: 18.5
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS323040
• Manufacturer: SKF

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Right
• Cone Size [mm]: 20
• paired article number: FT15119
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BOXER/JUMP/DUCATO02-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right, outer, Lower
• Payload to [kg]: 1,400
• Payload from [kg]: 1,000
• Cone Size [mm]: 16
• Supplementary Article/Info 2: with rubber mount, without ball joint
• Material: Cast Steel
• Length [mm]: 358
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 210125
• Weight [kg]: 6.582
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle Left
• Construction Year from: 02.2001
• suitable for rim size [inch]: 16
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• paired article number: 821 0810 10
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821080910

• Fitting Position: Front Axle Right
• Construction Year from: 02.2001
• suitable for rim size [inch]: 16
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• paired article number: 821 0809 10
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821081010

• Fitting Position: Lower, Front Axle Left
• Payload [kg]: 1,800
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 323043
• Inner Diameter [mm]: 18.5
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS323042
• Manufacturer: SKF

• Fitting Position: Front Axle Right, Lower
• Payload [kg]: 1,800
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 323042
• Inner Diameter [mm]: 18.5
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS323043
• Manufacturer: SKF

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Left
• Cone Size [mm]: 22
• paired article number: FT15023
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BOXER/JUMP/DUCATO02-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Semi-Trailing Arm
• Material: Steel
• paired article number: 301181302600
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left, outer, Lower
• Payload from [kg]: 1,800
• Cone Size [mm]: 19.2
• Supplementary Article/Info 2: with rubber mount, without ball joint
• Material: Cast Steel
• Length [mm]: 355
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 210127
• Weight [kg]: 6.77
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle Right, outer, Lower
• Payload from [kg]: 1,800
• Cone Size [mm]: 19.2
• Supplementary Article/Info 2: with rubber mount, without ball joint
• Material: Cast Steel
• Length [mm]: 355
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 210126
• Weight [kg]: 6.814
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Axle Load [kg]: 1,800
• Construction Year to: 01.2001
• only in connection with: 26668 01
• Replace in pairs only:
• Fitting Position: Front Axle, Lower, Left
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 24
• paired article number: 29420 01
• Material: Cast Steel
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Axle Load [kg]: 1,800
• Construction Year to: 01.2001
• only in connection with: 26668 01
• Replace in pairs only:
• Fitting Position: Front Axle, Lower, Right
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 24
• paired article number: 29419 01
• Material: Cast Steel
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BOXER/JUMP/DUCATO94-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Semi-Trailing Arm
• Material: Steel
• paired article number: 301181302700
• Manufacturer: MAGNETI MARELLI

• Payload [kg]: 1,000, 1,400
• Construction Year from: 02.2001
• Roolimisliik: Õõtshoob
• Installatsiooni pool: esisild vasakul, all
• Kaal (kg): 6,87
• Manufacturer: RTS SA

• Payload [kg]: 1,000, 1,400
• Construction Year from: 02.2001
• Roolimisliik: Õõtshoob
• Installatsiooni pool: esisild paremal, all
• Kaal (kg): 6,87
• Manufacturer: RTS SA

• Construction Year from: 02.2001
• Payload [kg]: 1,800
• Roolimisliik: Õõtshoob
• Installatsiooni pool: esisild vasakul, all
• Kaal (kg): 7,11
• Manufacturer: RTS SA

• Construction Year from: 02.2001
• Payload [kg]: 1,800
• Roolimisliik: Õõtshoob
• Installatsiooni pool: esisild paremal, all
• Kaal (kg): 7,11
• Manufacturer: RTS SA

• Fitting Position: Front Axle
• Manufacturer: JAPKO