• Payload [kg]: 1,800
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Supplementary Article/Supplementary Info: with accessories
• Lisainfo: Ball Joint
• Additional information: Ball Joint

• Fitting Position: Front Axle
• Weight [kg]: 0.452
• max. length [mm]: 120
• Width [mm]: 66
• Height [mm]: 80
• Material: Steel
• Thread Size 1: 16
• Name: Control arm ball joint left=right
• Quality class: PJ

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Width [mm]: 82
• Height [mm]: 110
• Thread Size: M18x1.5
• Fabrication Number: ZSD-PE-006
• Manufacturer: NTY

• Fitting Position: Front Axle, Lower
• for OE number: 1331641080
• Cone Size [mm]: 20
• Supplementary Article/Info 2: with bolts/screws
• for manufacturer number: 9040133
• Manufacturer: KAMOKA

Lisainfo: Ball Joint

• Fitting Position: Front Axle, Lower
• Cone Size [mm]: 20
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, Lower
• Net weight [kg]: 0.95
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: NK

• Fitting Position: Front Axle, Lower
• for OE number: 1302368080
• Cone Size [mm]: 17
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: KAMOKA

• Vehicle Equipment Line/Variant: 1.0 - 1.4 T
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size 1: MM16x1,5R
• Cone Size [mm]: 17.1
• Name: Control arm ball joint left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower
• Net weight [kg]: 1.14
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: NK

• Fitting Position: Front Axle, Lower
• for OE number: 1331640080
• Cone Size [mm]: 17
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: KAMOKA

• Vehicle Equipment Line/Variant: 1.8 T
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size 1: MM18x1,5R
• Cone Size [mm]: 19.5
• Name: Control arm ball joint left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Axle Load [kg]: 1,000, 1,400
• only in connection with: 2941801
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: Liigend - K„„ndmik FIAT P. DUCATO 01- LE/PR 10/14
• Manufacturer: MAX

• Installatsiooni pool: esisild vasakul, esisild paremal
• Väliskeere [mm]: M16x1,5
• koonusemõõt (mm): 17,3
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• Manufacturer: MERTZ

• Fitting Position: Front Axle, Lower
• Cone Size [mm]: 24
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: esisild vasakul, esisild paremal
• Väliskeere [mm]: M18x1,5
• koonusemõõt (mm): 20
• Piirangutega toode/piirangu info: koos lisadega
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Bore Diameter [mm]: 48
• Cone Size [mm]: 19.5
• Thread Size 1: M18X1,5
• Manufacturer: GSP

• Fitting Position: Front Axle, Lower, outer
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: esisild vasakul, esisild paremal
• Väliskeere [mm]: M16x1,5
• koonusemõõt (mm): 17,3
• Piirangutega toode/piirangu info: koos lisadega
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Cone Size [mm]: 17
• Thread Size 1: M16X1,5
• Manufacturer: GSP

• Payload to [kg]: 1,400
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Cone Size [mm]: 16.7
• Name: COC 49399107
• Manufacturer: CORTECO

• Installatsiooni pool: esisild vasakul, esisild paremal
• Keermemõõt: M18x1,5
• koonusemõõt (mm): 20
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• Manufacturer: MERTZ

• Fitting Position: Front Axle, Lower
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Payload from [kg]: 1,000
• Payload to [kg]: 1,400
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: JP GROUP
• Lisainfo: Ball Joint
• Additional information: Ball Joint

• Payload [kg]: 1,000, 1,400
• Supplementary Article/Supplementary Info: with accessories
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Cone Size [mm]: 20
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Axle Load [kg]: 1,000, 1,400
• Block Separation:
• Cone Size [mm]: 16.7
• Thread Size: M16x1,5 A
• SVHC: No SVHC present!
• Name: Kande-/juhtliigend
• Manufacturer: FAG

• Payload to [kg]: 1,800
• Fitting Position: Front Axle Right, Front Axle Left, Lower
• Cone Size [mm]: 19.5
• Name: COC 49399274
• Manufacturer: CORTECO

• Axle Load [t]: 1.8
• External Thread Size: M18 x 1,5
• Cone Size [mm]: 20
• Mounting points diameter [mm]: 12.5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.86
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Axle Load [kg]: 1,000, 1,400
• only in connection with: 2941801
• Fitting Position: Front Axle, Lower
• Supplementary Article/Supplementary Info: with accessories
• Name: Liigend - K„„ndmik FIAT P. DUCATO 01- LE/PR 10/14
• Manufacturer: QUARO

• Fitting Position: Lower, Front Axle, both sides
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle, both sides, Lower
• Payload [kg]: 1,000, 1,400
• Thread Size: M16x1.5
• Length [mm]: 114
• Width [mm]: 75
• Height [mm]: 96
• Manufacturer: DELPHI
• Name: DE TC828

• Axle Load [t]: 1, 1.4
• External Thread Size: M16 x 1,5
• Cone Size [mm]: 17.3
• Mounting points diameter [mm]: 12.5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.7
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Payload [kg]: 1,000, 1,400
• Block Separation:
• for RPO number from: 08551
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Quantity per axle: 2
• Thread Size: M 16 x 1,5 mm
• Manufacturer: TOPRAN

Braking System: for vehicles with disc brakes on the rear axle, for vehicles with drum brakes on the rear axle General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower, Front Axle, both sides
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Cone Size [mm]: 16.7, 19.4
• Thread Size: M16 x 1.5
• Mounting points diameter [mm]: 12.5
• Name: ALT 79308AL
• Manufacturer: ALTE AUTOMOTIVE

• Axle Load [t]: 1.8
• External Thread Size: M18 x 1,5
• Cone Size [mm]: 20
• Mounting points diameter [mm]: 12.5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.86
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: SW 70 92 2269
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Payload [kg]: 1,800
• Supplementary Article/Supplementary Info: with accessories
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
• Payload code: 10Q, 14Q
• Thread Size 1: M16X1.5 RHT
• Cone Size [mm]: 16.7
• paired article number: 220045
• Weight [kg]: 0.845
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle, Lower
• Weight [kg]: 0.889
• max. length [mm]: 110
• Width [mm]: 94
• Height [mm]: 95
• Material: Steel
• Thread Size 1: M16x1,5
• Quality class: PJ
• Name: Control arm ball joint left=right

• Fitting Position: Lower, Front Axle, both sides
• Cone Size [mm]: 20
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle, Lower
• Weight [kg]: 0.845
• max. length [mm]: 110
• Width [mm]: 81
• Height [mm]: 97
• Material: Steel
• Thread Size 1: M16x1,5
• Quality class: PJ
• Name: Control arm ball joint left=right

• Payload [kg]: 1,800
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: JP GROUP
• Lisainfo: Ball Joint
• Additional information: Ball Joint

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Payload [kg]: 1,000, 1,400
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: Liigend - K„„ndmik FIAT P. DUCATO 94- LE/PR 10/14
• Manufacturer: MAX

• Fitting Position: Front Axle, Lower
• Weight [kg]: 0.838
• max. length [mm]: 110
• Width [mm]: 108
• Height [mm]: 110
• Material: Steel
• Thread Size 1: M18x1,5
• Name: Control arm ball joint left=right
• Quality class: PJ

• not for gross vehicle weight [kg]: 1,800
• Production date to: 01/01
• Fitting Position: Front Axle, Lower
• Thread Size: M16x1,5
• for OE number: 364032
• Manufacturer: SASIC

• Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
• Payload code: 18Q
• Thread Size 1: M18X1.5 RHT
• Cone Size [mm]: 19.5
• paired article number: 220046
• Weight [kg]: 1.088
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle, both sides, Lower
• Payload [kg]: 1,800
• Thread Size: M18x1.5
• Length [mm]: 114
• Width [mm]: 75
• Height [mm]: 112
• Manufacturer: DELPHI
• Name: DE TC829

• Axle Load [kg]: 1,800
• Replace in pairs only:
• only in connection with: 2941901, 2942001
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: Liigend - K„„ndmik FIAT P. DUCATO 01- LE/PR 18
• Manufacturer: MAX

• Fitting Position: Lower, Front Axle both sides
• Required quantity: 2
• Payload [kg]: 1,800
• paired article number: VKDS 313011
• Cone Size [mm]: 19.5
• Cone Size 1 [mm]: 22.5
• Outer Diameter [mm]: 49
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M18 x 1,5
• Manufacturer: SKF ZAWIESZENIE

• Payload [kg]: 1,800
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: inner, Lower, Front Axle
• Thread Size 2: M18x1.5
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• not for payload [kg]: 1,800
• Weight [kg]: 0.8
• Cone Size [mm]: 16.2
• Packaging length [cm]: 14.5
• Packaging width [cm]: 11
• Packaging height [cm]: 10.5
• Manufacturer: MONROE

• Fitting Position: Front Axle, Lower
• Weight [kg]: 1.088
• max. length [mm]: 113
• Width [mm]: 81
• Height [mm]: 108
• Material: Steel
• Thread Size 1: M16x1,5
• Quality class: PJ
• Name: Control arm ball joint left=right

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: MAX

• Payload from [kg]: 1,000
• Payload to [kg]: 1,400
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size: M16x1,5
• Supplementary Article/Supplementary Info: with accessories
• reinforced version:
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Payload [kg]: 1,800
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size: M18x1,5
• Supplementary Article/Supplementary Info: with accessories
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Gross vehicle weight [kg]: 1,800
• Production date from: 02/01
• Fitting Position: Front Axle, Lower
• Thread Size: M18x1,5
• for OE number: 364054
• Manufacturer: SASIC

• Replace in pairs only:
• only in connection with: 29417 01, 29418 01
• Axle Load [kg]: 1,000, 1,400
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: LEMFORDER
• Name: LMI 2666701

SVHC: No information available, please contact the manufacturer!

• Payload [kg]: 1,800
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Payload [kg]: 1,800
• only in connection with: OE 3520.N4, OE 3521.J4
• Production date to: 01.01.2001
• Block Separation:
• Production date from: 01.02.2001
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size: M18x1,5
• Supplementary Article/Supplementary Info: with accessories
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik FIAT P. DUCATO
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Axle Load [kg]: 1,800
• Replace in pairs only:
• only in connection with: 29419 01, 29420 01
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 03.1997
• Payload from [kg]: 1,800
• Weight [kg]: 1.1
• Rim Size [inch]: 16
• Required quantity: 2
• Cone Size [mm]: 19.2
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, outer, Lower

• Payload from [kg]: 1,000
• Payload to [kg]: 1,400
• only in connection with: OE 3520.N3, OE 3521.J3
• Production date to: 01.01.2001
• Block Separation:
• Production date from: 01.02.2001
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size: M16x1,5
• Supplementary Article/Supplementary Info: with accessories
• reinforced version:
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik FIAT P. DUCATO 01- LE/PR DOLNY
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Payload [kg]: 1,000, 1,400
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Manufacturer: LEMFORDER
• Name: LMI 2453802

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Axle Load [kg]: 1,800
• Cone Size [mm]: 19.5
• Thread Size: M18x1,5 A
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 825019110

• Fitting Position: Lower Front Axle
• Weight [kg]: 0.9
• Manufacturer: FEBEST

• Fitting Position: Front Axle Right, Front Axle Left, Lower
• External Thread [mm]: M16X1,5
• Cone Size [mm]: 17
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Payload [kg]: 1,800
• Installatsiooni pool: esisild mõlemapoolselt, all
• Väliskeere 2 [mm]: M18x1,5
• Kaal (kg): 1
• Manufacturer: RTS