• Quantity per packing unit: 25
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Material: Copper
• Shape: C Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 036.400, 505.550, 505.540
• Manufacturer: ELRING
• Lisainfo: 813.036 ELR
• Additional information: 813.036 ELR

• Fitting Position: on transmission housing
• Transmission Type: Manual Transmission
• Transmission ID: MA
• Quantity per packing unit: 10
• Material: Copper
• Outer Diameter [mm]: 22
• Inner Diameter [mm]: 16
• Thickness [mm]: 2
• Shape: C Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for RPO number up to: 08364
• Thickness [mm]: 2
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 21
• Material: Copper
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number up to: 08364
• Thickness [mm]: 2
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 21
• Material: Copper
• Weight [kg]: 0.05
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 25
• Thickness [mm]: 2
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 21
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: on transmission housing
• Transmission ID: MA
• Transmission Type: Manual Transmission
• Quantity per packing unit: 25
• Thickness [mm]: 2
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 22
• Weight [kg]: 0.033
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 25
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 21
• Thickness [mm]: 2.1
• Material: Copper
• Shape: A Shape
• Alternative Repair Kit: 505.540
• Manufacturer: ELRING
• Lisainfo: 108.502 ELR
• Additional information: 108.502 ELR

• for RPO number from: 08878
• Thickness [mm]: 2
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 20
• Material: Copper
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 25
• Thickness [mm]: 2
• Inner Diameter [mm]: 10.2
• Outer Diameter [mm]: 20
• Material: Copper
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 6
• Weight [kg]: 0.02
• Thread Size: M10x1,25
• Weight [g]: 20
• Manufacturer: METALCAUCHO

• for RPO number from: 08878
• Material: Steel
• Length [mm]: 17
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• for OE number: 1146063
• Manufacturer: DELLO AUTOMEGA

• Block Separation:
• for RPO number up to: 08364, 09185
• for RPO number from: 08365
• Material: Copper
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 21
• Thickness [mm]: 2
• Shape: C Shape
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles with air conditioning, for vehicles without air conditioning General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M10 x 1,25
• Weight [kg]: 0.02
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 21
• Manufacturer: 3RG

• Vehicle Equipment: for vehicles without air conditioning
• for RPO number from: 08365
• for RPO number up to: 09185
• Material: Copper
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: A Shape
• DIN/ISO: 7603
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: on transmission housing
• Transmission Type: Manual Transmission
• Transmission ID: MA
• Quantity per packing unit: 5
• Bolt Head-/Nut Design: Inner rectangle
• Thread Size: M 16
• Thread Pitch [mm]: 1.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 19
• Thread Size: M16 x 1,50
• Manufacturer: 3RG

• Engine Code: RHY (DW10TD)
• Thickness [mm]: 2
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 19
• Manufacturer: AJUSA

• for RPO number from: 08878
• Length [mm]: 17
• External Thread Size: M10 x 1,25
• Thread Length [mm]: 13
• Quality/ Grade: 8.8
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 13
• Weight [kg]: 0.15
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number from: 08878
• Length [mm]: 13
• External Thread Size: M10 x 1,25
• Thread Length [mm]: 13
• Quality/ Grade: 8.8
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 13
• Weight [kg]: 0.15
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number from: 08878
• Length [mm]: 17
• External Thread Size: M10 x 1,25
• Thread Length [mm]: 13
• Quality/ Grade: 8.8
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 13
• Weight [kg]: 0.15
• Supplementary Article/Info 2: without seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 15.5
• Thread Size: M16 x 1,5
• Bolt Head-/Nut Design: Hexagon Socket
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Inner Diameter [mm]: 14.7
• Outer Diameter [mm]: 22
• Material: Rubber/Metal
• Shape: round
• Thickness [mm]: 1.5
• Packing Type: Blister Pack
• Manufacturer: CORTECO

• Thread Size: M14 x 1,25
• Manufacturer: 3RG

• Thread Size: M14x1,25
• Length [mm]: 13
• Additionally required articles (article numbers): 253.550.100
• Manufacturer: FA1 FISCHER

• Thread Size: M10x1,25x13
• Spanner Size: 21 mm
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: with seal ring
• Manufacturer: DR.MOTOR AUTOMOTIVE

• for OE number: 0313.27, 11131742994
• Inner Diameter [mm]: 14.3
• Outer Diameter [mm]: 20
• Material: Copper
• Thickness [mm]: 2
• Packing Type: Blister Pack
• Manufacturer: CORTECO

Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning

• Thread Size: M14x1.25
• Length [mm]: 13
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FA1

• for RPO number from: 08878
• Length [mm]: 17
• External Thread Size: M10 x 1,25
• Thread Length [mm]: 10
• Quality/ Grade: 8.8
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• Screw length below head [mm]: 11
• Seal Diameter [mm]: 20.4
• Weight [kg]: 0.2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• for RPO number from: 08365
• for RPO number up to: 08364, 09185
• Quantity per packing unit: 5
• Thread Size: M 10
• Thread Pitch [mm]: 1.25
• Length [mm]: 12.5
• Bolt Head-/Nut Design: Male Hex
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles with air conditioning, for vehicles without air conditioning General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for RPO number from: 08878
• Length [mm]: 17
• External Thread Size: M10 x 1,25
• Thread Length [mm]: 13
• Quality/ Grade: 8.8
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 13
• Weight [kg]: 0.15
• for OE number: 0311.29
• Manufacturer: ENERGY

• Vehicle Equipment: for vehicles without air conditioning
• for RPO number from: 08364
• for RPO number up to: 09185
• Thread Size: M10x1,25
• Length [mm]: 13
• Additionally required articles (article numbers): 746.520.100
• Manufacturer: FA1 FISCHER

• Thread Size: M10x1,25x13
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 21 mm
• Alternative Repair Kit: 877.930
• Supplementary Article/Info 2: without seal ring
• Manufacturer: ELRING

• Vehicle Equipment: for vehicles without air conditioning
• Thread Size: M10 x 1,25
• Screw length below head [mm]: 13
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 21
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per packing unit: 5
• Length [mm]: 17
• Required quantity: 1
• External Thread [mm]: M14 x 1,25
• Thread Length [mm]: 11
• Thread Size: M14 x 1,25
• Thread Pitch [mm]: 1.25
• Fitting Position: engine sided
• Spanner Size: 21
• Bolt Head-/Nut Design: Hexagon Socket
• Surface: Zinc-coated
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.021
• Manufacturer: VAICO

Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles without air conditioning
• for RPO number from: 08364
• for RPO number up to: 09185
• Thread Size: M10x1,25
• Length [mm]: 13
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FA1

• for RPO number up to: 08364
• Length [mm]: 17.3
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 11
• Quality/ Grade: 8.8
• Spanner Size: 21, 8
• Bolt Head-/Nut Design: Hexagon Socket, Male Hex
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 13
• Weight [kg]: 0.023
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M10x1,25x13
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 21 mm
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Thread Size: M14 x 1,25
• Bolt Head-/Nut Design: Male Hex, Hexagon Socket
• Spanner Size: 21, 8
• Length [mm]: 17
• Thread Length [mm]: 12.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M14x1,25x13
• Bolt Head-/Nut Design: Hexagon Socket
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• for RPO number up to: 08364
• Length [mm]: 17.3
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 11
• Quality/ Grade: 8.8
• Spanner Size: 21, 8
• Bolt Head-/Nut Design: Hexagon Socket, Male Hex
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 13
• Supplementary Article/Info 2: without seal ring
• Name: SW 62 94 7129
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 5
• Required quantity: 1
• Thread Length [mm]: 12
• Thread Pitch [mm]: 1.5
• Weight [kg]: 0.02
• External Thread [mm]: M16 x 1,5
• Surface: Zinc-coated
• Spanner Size: 8
• Bolt Head-/Nut Design: Inner rectangle
• Supplementary Article/Info 2: with seal ring
• Fitting Position: engine sided
• Thread Size: M16 x 1,5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles without air conditioning
• Length [mm]: 18
• Thread Size: M 10 x 1,25 x 12,5
• Spanner Size: 21
• Supplementary Article/Info 2: with seal ring
• Packing Type: Blister Pack
• Name: COU 220116S
• Manufacturer: CORTECO

• for RPO number up to: 08364
• Length [mm]: 17.3
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 11
• Quality/ Grade: 8.8
• Spanner Size: 21, 8
• Bolt Head-/Nut Design: Male Hex, Hexagon Socket
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 13
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 62 94 7130

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number up to: 08364
• Length [mm]: 17.3
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 11
• Quality/ Grade: 8.8
• Spanner Size: 21, 8
• Bolt Head-/Nut Design: Male Hex, Hexagon Socket
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 13
• Weight [kg]: 0.038
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 13
• Thread Size: M14x1.25
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Length [mm]: 17
• Thread Size: M 14 x 1,25 x 12,5
• Spanner Size: 21
• Supplementary Article/Info 2: with seal ring
• Packing Type: Blister Pack
• Manufacturer: CORTECO
• Name: COU 220105S

Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning

• Quantity per packing unit: 10
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: C Shape
• Material: Copper
• Alternatively:
• Manufacturer: FA1

• Thread Size: M16 x 1,50
• Length [mm]: 19
• Manufacturer: 3RG

• Vehicle Equipment: for vehicles without air conditioning
• for RPO number from: 08364
• for RPO number up to: 09185
• Quantity per packing unit: 10
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper
• Alternatively:

• Quantity per packing unit: 10
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 21
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper
• Alternatively:

• Material: ACM (Polyacrylate)
• Thickness [mm]: 64
• Manufacturer: FAST

• Quantity per packing unit: 100
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: C Shape
• Material: Copper

• Vehicle Equipment: for vehicles without air conditioning
• for RPO number from: 08364
• for RPO number up to: 09185
• Quantity per packing unit: 100
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper
• Manufacturer: FA1 FISCHER

• Quantity per packing unit: 100
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 21
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper