Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 10.1999
- Block Separation:
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Copper
- Shape: C Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
036.400, 505.550, 505.540 - Manufacturer: ELRING
- Lisainfo: 813.036 ELR
- Additional information: 813.036 ELR
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
-
Engine Code: WJZ
(DW8), WJY (DW8B) - Block Separation:
-
Material: Copper,
Aramid - Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Shape: C Shape
- Manufacturer: VICTOR REINZ
- Fitting Position: on transmission housing
- Transmission Type: Manual Transmission
- Transmission ID: MA
- Material: Copper
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: WJY
(DW8B), WJZ (DW8) - Block Separation:
- for RPO number up to: 08378
- Emission Standard: Euro 2
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Material: Copper
- Weight [kg]: 0.05
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: WJY
(DW8B), WJZ (DW8) - Block Separation:
- for RPO number up to: 08378
- Emission Standard: Euro 2
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Material: Copper
- Weight [kg]: 0.05
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: on transmission housing
- Transmission ID: MA
- Transmission Type: Manual Transmission
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Weight [kg]: 0.033
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 10.1999
- Block Separation:
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 10.1999
- Vehicle Equipment: for vehicles without air conditioning
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2.1
- Material: Copper
- Shape: A Shape
- Alternative Repair Kit: 505.540
- Manufacturer: ELRING
- Lisainfo: 108.502 ELR
- Additional information: 108.502 ELR
-
Engine Code: WJY
(DW8B), WJZ (DW8) - Block Separation:
- for RPO number from: 08379
- Thickness [mm]: 2
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Material: Copper
- Weight [kg]: 0.05
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 10.1999
- Vehicle Equipment: for vehicles without air conditioning
- Thickness [mm]: 2
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 20
- Material: Copper
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Block Separation:
- Material: Copper
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
Vehicle Equipment: for vehicles with air conditioning, for vehicles without air conditioning General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles without air conditioning
- Material: Copper
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- DIN/ISO: 7603
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 14.7
- Outer Diameter [mm]: 22
-
Material: Rubber/
Metal - Shape: round
- Thickness [mm]: 1.5
- Packing Type: Blister Pack
- Manufacturer: CORTECO
-
for OE number: 0313.27,
11131742994 - Vehicle Equipment: for vehicles with air conditioning
- Inner Diameter [mm]: 14.3
- Outer Diameter [mm]: 20
- Material: Copper
- Thickness [mm]: 2
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Construction Year to: 10.1999
- Block Separation:
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
- Alternatively:
- Manufacturer: FA1
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- Thickness [mm]: 1.5
- Width [mm]: 230
- Length [mm]: 440
- Manufacturer: BGA
- for RPO number from: 08378
- Vehicle Equipment: for vehicles without air conditioning
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
-
Engine Code: WJZ
(DW8) - Name: COU 423130P
- Manufacturer: CORTECO
-
Engine Code: WJY
(DW8B), WJZ (DW8) - Block Separation:
- Thickness [mm]: 1.6
-
Name: RN 71-
25918- 30 - Manufacturer: REINZ
-
Lisainfo: 71-
25918- 30 -
Additional information: 71-
25918- 30
- Vehicle Equipment: for vehicles without air conditioning
- Manufacturer: ELRING
- Lisainfo: 590.984 ELR
- Additional information: 590.984 ELR
- Vehicle Equipment: for vehicles without air conditioning
- Weight [kg]: 0.065
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 10.1999
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
-
Material: ACM
(Polyacrylate) - Thickness [mm]: 64
- Manufacturer: FAST
- for OE number: 012728
- Manufacturer: SASIC
- Construction Year to: 10.1999
- Block Separation:
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- for RPO number from: 08378
- Vehicle Equipment: for vehicles without air conditioning
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Manufacturer: FA1 FISCHER
- Construction Year from: 10.1999
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks