• Suspension: for vehicles with heavy duty suspension
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP

Lisainfo: Friction Bearing, suspension strut support mounting Additional information: Friction Bearing, suspension strut support mounting

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Manufacturer: JP GROUP
• Lisainfo: Suspension Strut Support Bearing
• Additional information: Suspension Strut Support Bearing

• Fitting Position: Rear Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 34
• for OE number: 517111
• paired article number: 1715125
• Name: Paigutus - Vedrustus/amordid PEUGEOT T. 405
• Manufacturer: SAS
• Additional information: 1715115 SASIC
• Lisainfo: 1715115 SASIC

• Fitting Position: Rear Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 33
• for OE number: 517112
• paired article number: 1715115
• Manufacturer: SAS
• Additional information: 1715125 SASIC
• Lisainfo: 1715125 SASIC

Name: Paigutus - Vedrustus/amordid PEUGEOT T. 405/BERLINGO/XSARA/BERLINGO

• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Fabrication Number: AD-KA-324
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY
• Name: NTY AD-KA-324

• Fitting Position: Front Axle
• Inner Diameter [mm]: 63
• Outer Diameter [mm]: 100
• Height [mm]: 20
• Material: Plastic
• for OE number: 7700803635
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Laager,amorditugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle, Right, Left
• Manufacturer: CORTECO
• Name: COC 80004831

• Fitting Position: Front Axle
• for OE number: 7700777654
• Name: Laager - K„„ndmik PEUGEOT
• Manufacturer: SAS

• Fitting Position: Right, Front Axle
• Inner Diameter 1 [mm]: 65
• Width 1 [mm]: 20
• Outer Diameter 1 [mm]: 100
• Manufacturer: SNR
• Name: SN M259.01
• Additional information: M259.01 SNR
• Lisainfo: M259.01 SNR

• Fitting Position: Front Axle
• Weight [g]: 151
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 20
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 99
• Name: IM 36231/1
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 127
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Front Axle
• Weight [kg]: 0.145
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Manufacturer: FEBEST

• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100, 72
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: FAST

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Thickness [mm]: 20
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 72, 100
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.172
• Name: Laager - K„„ndmik PEUGEOT 307
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Weight [kg]: 0.148
• Packaging length [cm]: 14.3
• Packaging width [cm]: 4.1
• Packaging height [cm]: 14.3
• Manufacturer: MONROE

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: AD-CT-002
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Diameter 1/ Diameter 2 [mm]: 62,6x100,00
• Height 1 [mm]: 20
• Quantity per axle: 2
• Manufacturer: METZGER

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Name: Laager - K„„ndmik. CITROEN XSARA
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: 3RG

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.99
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Lisainfo: 62 54 0005 SWA
• Additional information: 62 54 0005 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Front Axle
• Height [mm]: 49
• Width 1 [mm]: 147
• Length [mm]: 167
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF410.97

• Vehicle Equipment: for vehicles without power steering
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Fitting Position: Front Axle
• Weight [kg]: 1.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles without power steering
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: without ball bearing
• Name: SW 62 54 0016
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• for OE number: 546101D000
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• for OE number: 546122C000
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without power steering
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814000710

• Fitting Position: Right, Front Axle
• Supplementary Article/Info 2: with rubber mount
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB659.08

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.99
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Front Axle
• Supplementary Article/Info 2: with rubber mount
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB659.06

• Fitting Position: Front Axle
• for OE number: 503893
• Manufacturer: SASIC

• Fitting Position: Front Axle
• Manufacturer: KYB
• Additional information: KYBSM1906
• Lisainfo: KYBSM1906

Technical Information: Suspension mounting + separated suspension bearing, piston rod washer (x1) / / / Fastenings : piston rod nut, suspension mounting bolt/screw (x3) Name: Laager - K„„ndmik. CITROEN P. BERLINGO, XSARA PICASSO, ZX/ PEUGEOT PARTNER 1.1-2.0D 03.91- LE/PR

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.06
• Supplementary Article/Info 2: with ball bearing
• Name: Laager - K„„ndmik. CITROEN XARA PICASSO 00- LE/PR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.06
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: SWAG
• Name: SW 62 55 0004
• Lisainfo: 62 55 0004 SWA
• Additional information: 62 55 0004 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Supplementary Article/Info 2: with bearing
• Manufacturer: FAST

• Fitting Position: Front Axle
• Weight [kg]: 1.1
• Supplementary Article/Info 2: with rolling bearing, with ball bearing
• Warranty: 5 years warranty
• Packaging length [cm]: 15.4
• Packaging width [cm]: 8.7
• Packaging height [cm]: 14.7
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without power steering
• SVHC: No SVHC present!
• Name: LU 815000430
• Manufacturer: FAG

• for model code: TEPEE (B9)
• Fitting Position: Front Axle
• Weight [kg]: 0.581
• Packaging length [cm]: 11.9
• Packaging width [cm]: 11.9
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with power steering
• SVHC: No SVHC present!
• Name: LU 815000530
• Manufacturer: FAG

• Construction Year to: 05.2008
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Suspension: for vehicles with bad road version
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Manufacturer: METZGER