• Version: 1
• Core Depth [mm]: 12
• Core Length [mm]: 368
• Core Width [mm]: 566
• Chemical Properties: Corrosion resistant
• Inlet Ø [mm]: 14.3
• Material: Aluminium
• Supplementary Article/Supplementary Info: with nitrogen filling
• Outlet Ø [mm]: 11.1
• Refrigerant: R 134a, R 1234yf
• Supplementary Article/Info 2: with dryer
• Manufacturer: NISSENS
• Name: NI 940458
• Lisainfo: CITRO?N C4 PICASSO (B78) (13-) 1.6 HDI
• Additional information: CITRO?N C4 PICASSO (B78) (13-) 1.6 HDI

Technical Information: Nitrogen filling – Sealed with gas filling to keep moisture out

• Core Depth [mm]: 16
• Core Length [mm]: 601
• Core Width [mm]: 429
• Chemical Properties: Corrosion resistant
• Material: Aluminium
• Refrigerant: R 134a, R 1234yf
• Supplementary Article/Info 2: with dryer
• Lisainfo: CITRO?N C4 PICASSO (B78) (13-) 1.6 HDI
• Additional information: CITRO?N C4 PICASSO (B78) (13-) 1.6 HDI

Technical Information: Corrosion protection – Special coating protects the condenser against corrosion securing its long life

• Supplementary Article/Info 2: with dryer
• Refrigerant: R 134a
• Usable for refrigerant: R 134a
• Core Length [mm]: 364
• Core Width [mm]: 540
• Core Depth [mm]: 16
• Manufacturer: JPN

• Supplementary Article/Info 2: with dryer
• Core Length [mm]: 563
• Core Width [mm]: 360
• Core Depth [mm]: 12
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 009-016-0027

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Inlet Ø [mm]: 14.3
• Outlet Ø [mm]: 11
• Core Length [mm]: 565
• Core Width [mm]: 365
• Core Depth [mm]: 12
• Material: Aluminium
• Refrigerant: R 134a, R 1234yf
• Supplementary Article/Info 2: with dryer
• Name: AC condenser
• Quality class: PJ

Lisainfo: "Tootja: SRL
PEUGEOT 308 II/C4 II
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
PEUGEOT 308 II/C4 II
(kvaliteediklass: PJ)"

• Supplementary Article/Info 2: with dryer, with seal ring
• Core Length [mm]: 547
• Core Width [mm]: 429
• Core Depth [mm]: 12
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.1
• Name: SKRAPLACZ KLIMATYZACJI PEUGEOT 3008 16-
• Manufacturer: MAX

• Inlet Ø [mm]: 14.3
• Outlet Ø [mm]: 11
• Core Length [mm]: 565
• Core Width [mm]: 430
• Core Depth [mm]: 12
• Material: Aluminium
• Refrigerant: R 134a
• Supplementary Article/Info 2: with dryer
• Name: AC condenser
• Quality class: PJ

Lisainfo: "Tootja: SRL
PEUGEOT 308 II/C4 II, 16-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
PEUGEOT 308 II/C4 II, 16-
(kvaliteediklass: PJ)"

• Supplementary Article/Info 2: with dryer
• Core Length [mm]: 550
• Core Width [mm]: 418
• Core Depth [mm]: 16
• Material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with dryer
• Material: Aluminium
• Refrigerant: R 1234yf, R 134a
• Inlet Ø [mm]: 14.3
• Outlet Ø [mm]: 11.1
• Core Depth [mm]: 12
• Core Width [mm]: 368
• Core Length [mm]: 524
• Name: Kondensaator,kliimaseade
• Manufacturer: MAX

• Version: 2
• Supplementary Article/Info 2: with dryer
• Material: Aluminium
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.1
• Core Depth [mm]: 16
• Core Width [mm]: 565
• Core Length [mm]: 438
• Name: Kondensaator,kliimaseade
• Manufacturer: MAX

• Material: Aluminium
• Supplementary Article/Info 2: with dryer
• Core Length [mm]: 563
• Core Width [mm]: 350
• Core Depth [mm]: 12
• Fabrication Number: CCS-CT-022
• Manufacturer: NTY

• Supplementary Article/Info 2: with dryer
• Core Length [mm]: 570
• Core Width [mm]: 421
• Core Depth [mm]: 16
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Material: Aluminium
• Supplementary Article/Info 2: with dryer
• Refrigerant: R 134a
• Core Length [mm]: 563
• Core Width [mm]: 350
• Core Depth [mm]: 12
• Manufacturer: KAMOKA

• for OE number: 9673629480
• Material: Aluminium
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.1
• Core Length [mm]: 565
• Core Width [mm]: 438
• Core Depth [mm]: 16
• Manufacturer: KAMOKA

• Fabrication Number: CCS-CT-023
• Material: Aluminium
• Supplementary Article/Info 2: with dryer
• Core Length [mm]: 565
• Core Width [mm]: 434
• Core Depth [mm]: 16
• Refrigerant: R 134a
• Manufacturer: NTY

• for OE number: 9827450180
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.5
• Core Length [mm]: 550
• Core Width [mm]: 431
• Core Depth [mm]: 16
• Manufacturer: KAMOKA

• Radiator type: Parallel cooling pipes
• Core Length [mm]: 530
• Core Width [mm]: 360
• Core Depth [mm]: 16
• Inlet Ø [mm]: 14
• Outlet Ø [mm]: 11
• Supplementary Article/Info 2: with dryer
• Packaging width [cm]: 10.5
• Net Weight [g]: 1,512
• Packaging height [cm]: 52
• Packaging length [cm]: 75.5
• Name: Kondensaator,kliimaseade
• Manufacturer: BEH MAH

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Fabrication Number: CCS-CT-030
• Core Length [mm]: 550
• Core Depth [mm]: 16
• Core Width [mm]: 418
• Supplementary Article/Info 2: with dryer
• Material: Aluminium
• Manufacturer: NTY

• Material: Aluminium
• Supplementary Article/Info 2: with dryer
• Refrigerant: R 134a
• Core Length [mm]: 563
• Core Width [mm]: 416
• Core Depth [mm]: 12
• Manufacturer: KAMOKA

• Inlet Ø [mm]: 14.3
• Outlet Ø [mm]: 11.1
• Core Length [mm]: 565
• Core Width [mm]: 430
• Core Depth [mm]: 12
• Material: Aluminium
• Refrigerant: R 134a, R 1234yf
• Supplementary Article/Info 2: with dryer
• Quality class: PJ
• Name: AC condenser

• Fabrication Number: CCS-PE-009
• Material: Aluminium
• Core Length [mm]: 563
• Core Width [mm]: 416
• Core Depth [mm]: 12

• Supplementary Article/Info 2: with dryer, with seal ring
• Core Length [mm]: 547
• Core Width [mm]: 429
• Core Depth [mm]: 12
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.1
• Name: Kondensaator,kliimaseade
• Manufacturer: NRF

• Version: 1
• Supplementary Article/Info 2: with dryer, with seal ring
• Core Length [mm]: 550
• Core Width [mm]: 431
• Core Depth [mm]: 16
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.5
• Manufacturer: NRF

• Supplementary Article/Info 2: with dryer, with seal ring
• Material: Aluminium
• Core Length [mm]: 524
• Core Width [mm]: 368
• Core Depth [mm]: 12
• Inlet Ø [mm]: 14.3
• Outlet Ø [mm]: 11.1
• Name: KONDENSAATOR,KLIIMASEADE
• Manufacturer: NRF

• Core Length [mm]: 535
• Core Width [mm]: 430
• Core Depth [mm]: 16
• Supplementary Article/Info 2: with dryer
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.5
• Radiator type: Brazed cooling fins
• Packaging length [cm]: 79
• Packaging width [cm]: 50
• Packaging height [cm]: 11
• Weight [kg]: 3.6
• for OE number: 9815871080, 9827450180

• Supplementary Article/Info 2: with dryer
• Length [mm]: 574
• Width [mm]: 369
• Depth [mm]: 12
• Core Dimensions: 574x369x12
• Technical Information: Product all in aluminium
• Name: MM BC766
• Manufacturer: MAGNETI MARELLI

• Version: 1
• Core Depth [mm]: 12
• Core Length [mm]: 368
• Core Width [mm]: 566
• Chemical Properties: Corrosion resistant
• Inlet Ø [mm]: 14.3
• Material: Aluminium
• Supplementary Article/Supplementary Info: with nitrogen filling
• Outlet Ø [mm]: 11.1
• Refrigerant: R 134a
• Supplementary Article/Info 2: with dryer
• Manufacturer: AVA

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Core Length [mm]: 527
• Core Width [mm]: 430
• Core Depth [mm]: 16
• Supplementary Article/Info 2: with dryer
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.1
• Radiator type: Brazed cooling fins
• Packaging length [cm]: 80
• Packaging width [cm]: 50
• Packaging height [cm]: 7
• Weight [kg]: 2.282
• for OE number: 9673629480, 9677145480, 9817334080
• Manufacturer: AKSDASIS

• Version: 2
• Core Depth [mm]: 16
• Core Length [mm]: 531
• Core Width [mm]: 416
• Chemical Properties: Corrosion resistant
• Inlet Ø [mm]: 14.4
• Material: Aluminium
• Supplementary Article/Supplementary Info: with nitrogen filling
• Outlet Ø [mm]: 11
• Refrigerant: R 134a, R 1234yf
• Supplementary Article/Info 2: with dryer
• Manufacturer: NISSENS

Technical Information: Nitrogen filling – Sealed with gas filling to keep moisture out

• for OE number: 98 167 465 80
• Total Length [mm]: 563
• Total width [mm]: 369
• Core Length [mm]: 531
• Core Width [mm]: 369
• Core Depth [mm]: 12
• Inlet Ø [mm]: 14.3
• Outlet Ø [mm]: 11
• Refrigerant: R 134a
• Supplementary Article/Supplementary Info: with nitrogen filling
• Chemical Properties: Corrosion resistant
• Manufacturer: HC-CARGO

Supplementary Article/Info 2: with dryer, with mounting manual, without seal ring

• Core Depth [mm]: 12
• Core Length [mm]: 531
• Core Width [mm]: 416
• Chemical Properties: Corrosion resistant
• Material: Aluminium
• Refrigerant: R 134a, R 1234yf
• Supplementary Article/Info 2: with dryer

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Core Depth [mm]: 12
• Core Length [mm]: 428
• Core Width [mm]: 561
• Chemical Properties: Corrosion resistant
• Inlet Ø [mm]: 14.3
• Material: Aluminium
• Supplementary Article/Supplementary Info: with nitrogen filling
• Outlet Ø [mm]: 11.1
• Refrigerant: R 134a
• Supplementary Article/Info 2: with dryer
• Manufacturer: NISSENS
• Name: NI 941091

Technical Information: Nitrogen filling – Sealed with gas filling to keep moisture out

• Version: 2
• Supplementary Article/Info 2: with dryer, with seal ring
• Material: Aluminium
• Core Length [mm]: 565
• Core Width [mm]: 438
• Core Depth [mm]: 16
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.1
• Name: Kondensaator,kliimaseade
• Manufacturer: NRF

• alternative OE number: 9827450180
• Core Width [mm]: 548
• Core Length [mm]: 418
• Core Depth [mm]: 16
• Material: Aluminium
• Supplementary Article/Info 2: with dryer
• Refrigerant: R 134a
• Inlet Ø [mm]: 14
• Outlet Ø [mm]: 11
• Weight [kg]: 3.19
• Name: Kondensaator,kliimaseade
• Manufacturer: VAL

• for OE number: 98 274 501 80
• Total Length [mm]: 735
• Core Length [mm]: 570
• Core Width [mm]: 427
• Core Depth [mm]: 16
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11
• Refrigerant: R 124a
• Supplementary Article/Info 2: with dryer, with mounting manual, with seal ring
• Supplementary Article/Supplementary Info: with nitrogen filling
• Chemical Properties: Corrosion resistant
• Manufacturer: BOSCH
• Name: BS 1986AD2390

• Supplementary Article/Info 2: with dryer
• for OE number: 3644520
• Refrigerant: R 134a
• Thickness [mm]: 12
• Weight [g]: 1,620
• Gross Weight [g]: 2,450
• Name: DN DCN21032
• Manufacturer: DENSO

• alternative OE number: 9817334080
• Core Width [mm]: 550
• Core Length [mm]: 418
• Core Depth [mm]: 16
• Material: Aluminium
• Supplementary Article/Info 2: with dryer
• Refrigerant: R 134a
• Inlet Ø [mm]: 14
• Outlet Ø [mm]: 11
• Weight [kg]: 3.11
• Manufacturer: VALEO
• Name: VA 822706

• Core Depth [mm]: 12
• Core Length [mm]: 531
• Core Width [mm]: 416
• Chemical Properties: Corrosion resistant
• Material: Aluminium
• Refrigerant: R 134a, R 1234yf
• Supplementary Article/Info 2: with dryer
• Lisainfo: PEUGEOT 308 (13-) 1.2 VTi
• Additional information: PEUGEOT 308 (13-) 1.2 VTi

Technical Information: Corrosion protection – Special coating protects the condenser against corrosion securing its long life

• for OE number: 98 173 340 80
• Total width [mm]: 438
• Core Length [mm]: 565
• Core Width [mm]: 437
• Core Depth [mm]: 16
• Inlet Ø [mm]: 14.4
• Outlet Ø [mm]: 11.1
• Refrigerant: R 1234yf, R 134a
• Supplementary Article/Supplementary Info: with nitrogen filling
• Chemical Properties: Corrosion resistant
• Manufacturer: BOSCH
• Name: BS 1986AD2378

Supplementary Article/Info 2: with dryer, with bolts/screws, with mounting manual, without seal ring

• Core Width [mm]: 358
• Core Length [mm]: 563
• Core Depth [mm]: 12
• Material: Aluminium
• Supplementary Article/Info 2: with dryer
• Weight [kg]: 2.96
• Name: Kondensaator,kliimaseade
• Manufacturer: VAL

• Radiator type: Parallel cooling pipes
• Core Length [mm]: 547
• Core Width [mm]: 350
• Core Depth [mm]: 12
• Outlet Ø [mm]: 11
• Supplementary Article/Info 2: with dryer
• Net Weight [g]: 1,789
• Packaging height [cm]: 37.3
• Packaging width [cm]: 4.3
• Packaging length [cm]: 74.1
• Name: MH AC886000S
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Core Length [mm]: 535
• Core Width [mm]: 433
• Core Depth [mm]: 12
• Supplementary Article/Info 2: with dryer
• Inlet Ø [mm]: 11
• Outlet Ø [mm]: 14
• Radiator type: Brazed cooling fins
• Packaging length [cm]: 89
• Packaging width [cm]: 50
• Packaging height [cm]: 10
• Weight [kg]: 2.4
• for OE number: 3552498, 9817275680
• Manufacturer: AKSDASIS

• Radiator type: Parallel cooling pipes
• Core Length [mm]: 535
• Core Width [mm]: 361
• Core Depth [mm]: 12
• Supplementary Article/Info 2: with dryer
• Manufacturer: MAHLE
• Packaging width [cm]: 12
• Net Weight [g]: 2,961
• Packaging height [cm]: 60
• Packaging length [cm]: 77

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.