• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Overall Length [mm]: 565
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-CT-009
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Length [mm]: 410
• Fabrication Number: ESL-CT-007
• Manufacturer: NTY
• Name: NTY ESL-CT-007

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased

• Length [mm]: 550
• Fitting Position: Front, after catalytic converter
• Transmission Type: Automatic Transmission
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-CT-000
• Manufacturer: NTY
• Name: NTY ESL-CT-000

• Length [mm]: 555
• Transmission Type: Manual Transmission
• Fabrication Number: ESL-CT-004
• Manufacturer: NTY
• Name: NTY ESL-CT-004

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Construction Year to: 08.2007
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 410
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Sensor
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Oxygen Sensor: Diagnostic Probe, Planar Sensor
• Fitting Position: after catalytic converter
• Number of pins: 4
• Length [mm]: 580
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Front
• Quantity: 1
• Supplementary Article/Info 2: for dusty operating conditions
• Length [mm]: 550
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year to: 08.2007
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Name: Lambda andur
• Manufacturer: MAX
• Lisainfo: 59-0122
• Additional information: 59-0122

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Sensor
• Manufacturer: JAPKO

• for RPO number up to: 09085
• Emission Standard: L4, US 83
• Block Separation:
• Climate Zones: not for hot climate zones
• for RPO number from: 09086
• Oxygen Sensor: Regulating Sensor, Planar Sensor
• Number of pins: 4
• Fitting Position: before catalytic converter
• Length [mm]: 610
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Planar Sensor
• Climate Zones: for hot climate zones
• Number of pins: 4
• Length [mm]: 455
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for dusty operating conditions
• Cable Length [mm]: 370
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.2007
• Oxygen Sensor: Regulating Sensor, Heated
• Block Separation:
• not for emission standard: Euro 4 (D4)
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: after catalytic converter, before catalytic converter

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: not for dusty operating conditions
• Cable Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Guarantee: 5 years guarantee
• Overall Length [mm]: 570
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135329
• Manufacturer: HITACHI

• Fitting Position: after catalytic converter
• Construction Year to: 08.2007
• Oxygen Sensor: Diagnostic Probe
• Guarantee: 5 years guarantee
• Overall Length [mm]: 570
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135333
• Manufacturer: HITACHI

• Construction Year to: 08.2007
• Oxygen Sensor: Regulating Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 570
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135334
• Manufacturer: HITACHI

• Oxygen Sensor: Regulating Sensor, Heated
• Supplementary Article/Info 2: for dusty operating conditions
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 300
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: TU5JP4
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Block Separation:
• Supplementary Article/Info 2: not for dusty operating conditions
• Cable Length [mm]: 380
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Planar Sensor, Heated Fitting Position: after catalytic converter, before catalytic converter

• Oxygen Sensor: Diagnostic Probe, Switching-type Oxygen Sensor
• Construction Year from: 03.2001
• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Length [mm]: 536
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV062

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 540
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV035
• Manufacturer: ESEN SKV

• Construction Year to: 08.2007
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4)
• Number of circuits: 4
• Overall Length [mm]: 410
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Resistor [Ohm]: 6
• Length [mm]: 570
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 570
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Regulating Sensor, Heated
• Voltage [V]: 12
• Length [mm]: 410
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV671
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: not for dusty operating conditions
• Cable Length [mm]: 530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 08.2007
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• not for emission standard: Euro 4 (D4)
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 565
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV689

• Oxygen Sensor: Diagnostic Probe, Switching-type Oxygen Sensor
• Construction Year from: 03.2001
• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Length [mm]: 570
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV703
• Manufacturer: ESEN SKV

• Oxygen Sensor: Heated
• Thread Size: M18 x 1,5
• Number of pins: 4
• Connector Shape: rectangular
• Overall Length [mm]: 600
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Resistor [Ohm]: 9
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 570
• Cable Length [mm]: 570
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM018

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated
• not for emission standard: Euro 4
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.092
• for OE number: 1618.Z6
• Name: SW 33 10 3089
• Manufacturer: SWAG

Fitting Position: before catalytic converter, after catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• for OE number: 1618Z6
• Manufacturer: MEAT&DORIA

• Conductor Number: 4
• Length [mm]: 400
• Resistor [Ohm]: 9
• Number of circuits: 4
• Cable Length [mm]: 400
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Block Separation:
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: 18x1,5
• Connector Shape: angular
• Cable Length [mm]: 400
• Conductor Number: 4
• Length [mm]: 630
• Number of circuits: 4
• Version: ZR PLANAR
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.2007
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4)
• Block Separation:
• not for emission standard: Euro 4 (D4)
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 600
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Sensor, Heated
• Supplementary Article/Info 2: not for dusty operating conditions
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 470
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Sensor, Heated
• Construction Year to: 08.2007
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Planar Sensor
• Number of pins: 4
• Cable Length [mm]: 1,370
• Quality: OE EQUIVALENT
• for OE number: 00001628HQ
• Manufacturer: MEAT&DORIA

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 550
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 55353148
• Quality: OE
• Weight [g]: 99
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: DN DOX-2005
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 570
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after catalytic converter
• Cable Length [mm]: 1,235
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20307-12B1

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES20258-12B1

• Engine Code: NFU (TU5JP4)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Switching Capacity [W]: 18
• Length [mm]: 550
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Engine Code: NFU (TU5JP4)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 550
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 10.7007
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year to: 08.2007
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: not for dusty operating conditions
• Quantity: 1
• Cable Length [mm]: 1,410
• Name: DE ES20309-12B1
• Manufacturer: DELPHI

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Conductor Number: 4
• Cable Length [mm]: 450
• Thread Size: M18 x 1,5
• Length [mm]: 570
• Version: ZR-PLANAR
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 600
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: NFU (TU5JP4)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Switching Capacity [W]: 7
• Length [mm]: 550
• Cable Length [mm]: 1,500
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: EP 1.998.301
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Quantity: 1
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Number of circuits: 4
• Socket colour: green
• Connector Shape: rectangular
• Thread Size: M18 x 1,5
• for OE number: 96 369 687 80
• Cable Length [mm]: 500
• Length [mm]: 600
• Number of connectors: 4
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Heated
• Construction Year to: 08.2007
• Emission Standard: Euro 4 (D4)
• Length [mm]: 410
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Construction Year to: 08.2007
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 530
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.