Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 100
-
Kaal (kg): 0,
001 - Materjal: Vask
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 22
- Kaal (g): 1
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 25
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 20
- Jämedus/Tugevus (mm): 2
- Materjal: Vask
-
Kuju: C-
kuju - DIN/ISO: 7603
-
alternatiivne remondikomplekt: 017.736,
036.400, 505.550, 505.540 - Manufacturer: ELRING
- Jämedus/Tugevus (mm): 2
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 21
- Materjal: Vask
-
Kaal (kg): 0,
05 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Jämedus/Tugevus (mm): 2
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 21
- Installatsiooni pool: Õlivann
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Materjal: Vask
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 21
- Jämedus/Tugevus (mm): 2
-
Kuju: C-
kuju - Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 10
-
Kaal (kg): 0,
028 - Keermemõõt: 16x150
- Kaal (g): 28
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 10
-
Kaal (kg): 0,
022 - Keermemõõt: 14x125
- Kaal (g): 22
- Manufacturer: METALCAUCHO
- Välisläbimõõt [mm]: 22
-
Siseläbimõõt [mm]: 14,
7 -
Jämedus/Tugevus (mm): 1,
5 -
Materjal: Kumm/
metall - Kuju: ümar
- Konteineri tüüp: Blisterpack
- Manufacturer: CORTECO USZCZELKI
-
Keermemõõt: M14x1,
25 - Pikkus (mm): 13
- lisaks vajatav toode (tootekood): 253.550.100
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Keermemõõt: M14x1.25
- Pikkus (mm): 13
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Välisläbimõõt [mm]: 20
-
Siseläbimõõt [mm]: 14,
3 - Jämedus/Tugevus (mm): 2
- Materjal: Vask
- Konteineri tüüp: Blisterpack
- Manufacturer: CORTECO USZCZELKI
-
Keermemõõt: M14 x 1,
25 - Manufacturer: 3RG
- Quantity per packing unit: 5
- Keermemõõt: M 14
-
Keerme samm (mm): 1,
25 - Kruvipea-/Mutriprofiil: Väliskuuskant
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 5
- Pikkus (mm): 17
- vajaminev tükihulk: 1
-
Väliskeere [mm]: M14 x 1,
25 - Keermepikkus (mm): 11
-
Keermemõõt: M14 x 1,
25 -
Keerme samm (mm): 1,
25 - Installatsiooni pool: mootoripoolne
- Võtmekaugus: 21
- Kruvipea-/Mutriprofiil: sisekuuskant
- Pealispind: tsingitud
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Keermemõõt: M14x1,
25x13 - Kruvipea-/Mutriprofiil: Väliskuuskant
- alternatiivne remondikomplekt: 877.950
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Manufacturer: ELRING
- Pikkus (mm): 17
-
Väliskeerme mõõde: M14 x 1,
25 - Keermepikkus (mm): 11
- Kvaliteet/klass: 8.8
-
Võtmekaugus: 21,
8 -
Kruvipea-/Mutriprofiil: sisekuuskant,
Väliskuuskant - Materjal: Metall
-
Pealispind: Tsink-
nikkliga kaetud - Kruvipikkus kruvipea all [mm]: 13
-
Kaal (kg): 0,
023 - Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Keermemõõt: M14x1,
25x13 - Kruvipea-/Mutriprofiil: sisekuuskant
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: ELRING
-
Pikkus (mm): 17,
3 -
Väliskeerme mõõde: M14 x 1,
25 - Keermepikkus (mm): 11
- Kvaliteet/klass: 8.8
-
Võtmekaugus: 21,
8 -
Kruvipea-/Mutriprofiil: sisekuuskant,
Väliskuuskant - Materjal: Metall
-
Pealispind: Tsink-
nikkliga kaetud - Kruvipikkus kruvipea all [mm]: 13
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Name: SW 62 94 7129
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 17
-
Väliskeerme mõõde: M14 x 1,
25 - Keermepikkus (mm): 11
- Kvaliteet/klass: 8.8
-
Võtmekaugus: 21,
8 -
Kruvipea-/Mutriprofiil: Väliskuuskant,
sisekuuskant - Materjal: Metall
-
Pealispind: Tsink-
nikkliga kaetud - Kruvipikkus kruvipea all [mm]: 13
-
Kaal (kg): 0,
038 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 17
-
Keermemõõt: M 14 x 1,
25 x 12, 5 - Konteineri tüüp: Blisterpack
- Võtmekaugus: 21
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: COT
-
Pikkus (mm): 17,
3 -
Väliskeerme mõõde: M14 x 1,
25 - Keermepikkus (mm): 11
- Kvaliteet/klass: 8.8
-
Võtmekaugus: 21,
8 -
Kruvipea-/Mutriprofiil: Väliskuuskant,
sisekuuskant - Materjal: Metall
-
Pealispind: Tsink-
nikkliga kaetud - Kruvipikkus kruvipea all [mm]: 13
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: SW 62 94 7130
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 13
- Keermemõõt: M14x1.25
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: FAST
- Pikkus (mm): 17
-
Väliskeerme mõõde: M14 x 1,
25 - Keermepikkus (mm): 11
- Kvaliteet/klass: 8.8
- Võtmekaugus: 22
-
Kruvipea-/Mutriprofiil: Väliskuuskant,
sisekuuskant - Materjal: Metall
-
Pealispind: Tsink-
nikkliga kaetud - Kruvipikkus kruvipea all [mm]: 13
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 20
- Jämedus/Tugevus (mm): 2
-
Kuju: C-
kuju - Materjal: Vask
- valikuliselt:
- Name: Rongastihend
- Manufacturer: FIS
-
Materjal: ACM
( (Polyacryl- Kautschuk) - Jämedus/Tugevus (mm): 64
- Manufacturer: FAST
- Quantity per packing unit: 100
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 20
- Jämedus/Tugevus (mm): 2
-
Kuju: C-
kuju - Materjal: Vask
- Name: Rongastihend
- Manufacturer: FIS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks