• Quantity per packing unit: 4
• Fitting Position: Left
• Weight [kg]: 0.065
• Height 1 [mm]: 28.6
• Height 2 [mm]: 33.8
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 30
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 65
• Manufacturer: METALCAUCHO

• for OE number: 184397
• Fitting Position: Right Front
• Required quantity: 1
• Material: Rubber/Metal
• Weight [g]: 77
• Manufacturer: IMP

Name: PODUSZKA SIL. CITROEN BX, C15, VISA, PEUGEOT 205, 309, 405 07.82-12.00 PR PRZàD

• Fitting Position: Front
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 30
• Length 2 [mm]: 34
• Length 1 [mm]: 28
• for OE number: 180904
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS
• Lisainfo: 8091041 SAS
• Additional information: 8091041 SAS

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• for OE number: 184417
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Material: Rubber/Metal
• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• for OE number: 1844.17
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Country Specific Design: France
• Fitting Position: Right, Upper
• Weight [kg]: 0.08
• Name: COC 80000966
• Manufacturer: CORTECO

• for OE number: 180608
• Fitting Position: Rear
• Required quantity: 1
• Material: Rubber/Metal
• Weight [g]: 69
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 30
• Length [mm]: 28
• Overall Length [mm]: 34
• Manufacturer: IMP

Name: PODUSZKA SIL. CITROEN BERLINGO, JUMPY II, FIAT ULYSSE, LANCIA PHEDRA, PEYGEOT 305 II, 306, 406 07.82- TY

• Material: Rubber/Metal
• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• for OE number: 1844.17
• Name: SW 64 13 0003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 28, 34
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 30
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB
• Additional information: F09400
• Lisainfo: F09400

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left
• for OE number: 1843 95
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Right
• for OE number: 1843 55
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Left
• Manufacturer: BGA

• Weight [kg]: 0.291
• Fitting Position: Rear
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Height 1 [mm]: 53
• Height 2 [mm]: 40
• Manufacturer: 3RG

• Fitting Position: Left Front
• Length [mm]: 100, 80
• Width [mm]: 69.5
• Height [mm]: 47.5
• Weight [kg]: 0.24
• Inner Diameter [mm]: 13
• Weight [g]: 240
• Manufacturer: METALCAUCHO

• Mounting Type: Rubber-Metal Mount
• Fitting Position: transmission sided
• for OE number: 184395
• Manufacturer: SASIC

• Fitting Position: Left
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.25
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Manufacturer: METZGER

• Fitting Position: Right, Upper
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 10
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Fitting Position: Lower, Upper Right
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Length 2 [mm]: 53
• Length 1 [mm]: 40
• for OE number: 180916
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Fitting Position: Right
• Fabrication Number: ZPS-PE-013
• Mounting Type: Rubber-Metal Mount
• Manufacturer: NTY
• Name: NTY ZPS-PE-013

• Fitting Position: Rear
• Length [mm]: 40, 53
• Weight [kg]: 0.29
• Material: Rubber/Metal
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 290
• Manufacturer: METALCAUCHO

• Fitting Position: Lower, engine sided
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• for OE number: 180916
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• for OE number: 9613 305 380
• Fitting Position: engine sided, Rear
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 10
• Weight [kg]: 0.2
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Weight [kg]: 0.17
• Height 1 [mm]: 40
• Height 2 [mm]: 53
• Material: Rubber/Metal
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 65
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 170
• Manufacturer: METALCAUCHO

• Fitting Position: Left
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Engine Mounting
• Additional information: Engine Mounting

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Centre
• Manufacturer: FAST

• Fitting Position: Right Rear, Right Front
• Material: Rubber/Metal
• Weight [g]: 308
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Length [mm]: 40
• Overall Length [mm]: 53
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Height [mm]: 40, 53
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.1
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Right
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Left
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.25
• Name: SW 62 13 0005
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 40, 53
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.1
• Name: SW 62 13 0003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Fitting Position: Rear, Front Axle
• Material: Rubber/Metal
• Name: Engine mounting
• Quality class: PJ

Lisainfo: "Tootja: SRL
CITROEN BERLINGO/XSA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
CITROEN BERLINGO/XSA
(kvaliteediklass: PJ)"

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• for OE number: 184442
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Engine Mounting
• Additional information: Engine Mounting

• Country Specific Design: France
• Fitting Position: Right
• for OE number: 1844 42
• Weight [kg]: 0.5
• Mounting Type: Hydro Mount
• Manufacturer: CORTECO
• Name: COC 21652739

• for OE number: 96177470
• Fitting Position: Right Front
• Required quantity: 1
• Weight [g]: 500
• Name: IM 30333
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Right Front
• Weight [kg]: 0.43
• Mounting Type: Rubber-Metal Mount
• Manufacturer: METALCAUCHO

• Engine Code: XUD7
• Fitting Position: Right Front
• Weight [kg]: 0.6
• Mounting Type: Hydro Mount
• Weight [g]: 650
• Manufacturer: METALCAUCHO

• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.45
• for OE number: 1844.42
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.45
• for OE number: 1844.42
• Name: SW 64 13 0004
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• Manufacturer: FAST

• Fitting Position: Right Front
• Mounting Type: Hydro Mount
• Weight [g]: 586
• Name: IM 30333/H
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Right Front
• Weight [kg]: 0.179
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 5.3
• Manufacturer: FEBEST