• Filter type: Filter Insert
• Height [mm]: 60
• Inner Diameter [mm]: 20
• Outer Diameter [mm]: 67
• Outer Diameter 1 [mm]: 80
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 68
• Quality class: PJ
• Name: Fuel filter

• Filter type: Filter Insert
• Height [mm]: 60
• Outer Diameter [mm]: 80
• Inner Diameter [mm]: 20
• Packing Type: Carton
• Packaging length [cm]: 8
• Packaging width [cm]: 8
• Packaging height [cm]: 6.2
• Name: CH CFF100141
• Manufacturer: CHAMPION

• Filter type: Filter Insert
• Length [mm]: 61
• Outer Diameter [mm]: 80
• Inner Diameter [mm]: 11
• for OE number: 1606451188
• Manufacturer: ASHIKA-FILTRY

• Inner Diameter [mm]: 19.5
• Outer Diameter [mm]: 67
• Height [mm]: 60
• Outer Diameter 1 [mm]: 80
• Filter type: Filter Insert
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Height [mm]: 60
• Diameter 4 [mm]: 69
• Fuel Type: Diesel
• Inner Diameter [mm]: 11
• Brake System: Purflux
• Filter type: Filter Insert
• Outer Diameter 1 [mm]: 80
• Manufacturer: DRIVE

• Engine Code: XUD9TEF
• Filtritüüp: Filtrer
• Kõrgus (mm): 61
• Välisläbimõõt [mm]: 80
• Välisläbimõõt 1 [mm]: 80
• Välisläbimõõt 2 [mm]: 68
• Siseläbimõõt [mm]: 12
• Kaal (kg): 0,117
• Manufacturer: VALEO
• Name: VA 587900
• Additional information: 587900 VALEO
• Lisainfo: 587900 VALEO

• Filter type: Filter Insert
• Height [mm]: 60
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 67
• Manufacturer: FAST

• Filtritüüp: Filtrer
• Välisläbimõõt [mm]: 80
• Kõrgus (mm): 61
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filtritüüp: Filtrer
• Välisläbimõõt 1 [mm]: 80
• Siseläbimõõt 1 [mm]: 12
• Välisläbimõõt 2 [mm]: 69
• Kõrgus (mm): 61
• Manufacturer: KOLBENSCHMIDT

• Filtritüüp: Filtrer
• Kõrgus (mm): 61
• Siseläbimõõt [mm]: 12
• Välisläbimõõt 1 [mm]: 80
• Välisläbimõõt 2 [mm]: 68
• SVHC: SVHS aineid ei esine
• Manufacturer: FILTRON

• Välisläbimõõt [mm]: 80
• Läbimõõt [mm]: 68
• Läbimõõt 1 (mm): 11,5
• Filtritüüp: Filtrer
• Kõrgus (mm): 61
• Name: KšTUSEFILTER
• Manufacturer: MEY
• Lisainfo: 11-143230002
• Additional information: 11-143230002

• Filtritüüp: Filtrer
• Kõrgus (mm): 58
• Välisläbimõõt 1 [mm]: 80
• Välisläbimõõt 2 [mm]: 64,8
• Siseläbimõõt [mm]: 11
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: Filter Insert
• Outer Diameter [mm]: 81.5
• Inner Diameter [mm]: 19
• Inner Diameter 1 [mm]: 71.5
• Height [mm]: 63
• Manufacturer: HENGST FILTER

• Diameter [mm]: 81
• Material: Metal
• Filter type: Filter Insert
• Manufacturer: DELPHI
• Name: DE HDF910

• Filter type: Filter Insert
• Diameter [mm]: 80.5
• Outer Diameter 1 [mm]: 68
• Height [mm]: 61
• Name: BS 1457429291
• Manufacturer: BOSCH

• Filter type: Filter Insert
• Height [mm]: 60
• Outer Diameter [mm]: 77
• Inner Diameter [mm]: 12
• Diameter 3 [mm]: 65
• Name: Fuel filter
• Quality class: Q

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
BX (XB-/), 10.82-06.
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
BX (XB-/), 10.82-06.
(kvaliteediklass: PJ)"

• Filtritüüp: Filtrer
• Kõrgus (mm): 60
• Välisläbimõõt [mm]: 77
• Siseläbimõõt [mm]: 12
• Läbimõõt 3 (mm): 65
• Manufacturer: PURFLUX

• ELi tooteohutuse määrus (GPSR): IEC 60417-6183 nõutavad mehaanikaalased teadmised
• Filtritüüp: Filtrer
• Kõrgus (mm): 60
• Siseläbimõõt [mm]: 20
• Välisläbimõõt [mm]: 67
• Välisläbimõõt 1 [mm]: 78
• SVHC: SVHS aineid ei esine
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Filter type: Filter Insert
• Diameter [mm]: 69.5
• Height [mm]: 62
• Inner Diameter 2 [mm]: 10
• Inner Diameter 3 [mm]: 80
• Net Weight [g]: 43
• Packaging height [cm]: 7.5
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Name: KN KX63/1
• Manufacturer: KNECHT

• Filter type: Filter Insert
• Diameter [mm]: 69.5
• Height [mm]: 62
• Inner Diameter 2 [mm]: 10
• Inner Diameter 3 [mm]: 80
• Net Weight [g]: 45
• Packaging height [cm]: 7.5
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Manufacturer: MAHLE KNECHT

• Driven Units: Camshaft
• Number of Teeth: 136
• Length [mm]: 1,295
• Width [mm]: 25
• Manufacturer: KAMOKA

• for RPO number from: 09156
• for RPO number up to: 09792
• Payload [kg]: 800
• Fitting Position: Front Axle
• Width [mm]: 129.8
• Thickness [mm]: 19
• Height [mm]: 58.7
• Wear Warning Contact: incl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Number of Teeth: 136
• Length [mm]: 1,295
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Wheelbase: short wheelbase
• Quantity per packing unit: 4
• Width [mm]: 60
• Brake System: BENDIX
• Inner brake drum diameter [mm]: 255
• Manufacturer: LPR
• Name: LPR 07150

• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 31
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Width [mm]: 25.4
• Number of Teeth: 136
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.15
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number from: 09793
• Production date from: 2003-08-31
• Fitting Position: Front Axle
• Brake System: Lucas
• Height [mm]: 59.9
• Width [mm]: 147
• Thickness [mm]: 19.3
• Wear Warning Contact: with integrated wear warning contact
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Construction Year from: 04.1996
• Vehicle Identification Number (VIN) to: 09155
• Fitting Position: Front Axle
• Payload [kg]: 800
• Quantity per packing unit: 4
• Height [mm]: 68.8
• Width [mm]: 139.9
• Thickness [mm]: 18.5
• Warning Contact Length [mm]: 280
• Brake System: BENDIX
• Number of wear indicators [per axle]: 2
• Manufacturer: LPR
• Additional information: 05P346
• Lisainfo: 05P346

• Fitting Position: Front Axle
• for RPO number from: 09793
• Payload [kg]: 800, 900
• Brake System: Lucas / TRW
• Width 1 [mm]: 146.6
• Height [mm]: 60
• Thickness [mm]: 19
• Warning Contact Length [mm]: 166
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for RPO number up to: 09155
• Production date to: 01.12.2001
• Payload [kg]: 815
• Height [mm]: 68.6
• Thickness [mm]: 19
• Wear Warning Contact: with integrated wear sensor
• Number of wear indicators [per axle]: 2
• Brake System: Bendix
• Fitting Position: Front Axle
• Width [mm]: 140
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-0591
• Additional information: 19-0591

• Construction Year from: 04.1996
• for RPO number up to: 09792
• Payload [kg]: 900, 800
• Block Separation:
• for RPO number from: 09156
• Fitting Position: Front Axle
• Brake System: LUCAS/TRW
• Height [mm]: 58.7
• Width [mm]: 130
• Thickness [mm]: 19
• Wear Warning Contact: incl. wear warning contact
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Engine Code: XUD9TE
• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: XUD9TE
• for OE number: 081658
• Number of Teeth: 136
• Width [mm]: 25.4
• Name: HAMMASRIHM
• Manufacturer: DAY

• Fitting Position: Front Axle
• Width [mm]: 140
• Thickness [mm]: 19
• Height [mm]: 69
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Bendix
• Warning Contact Length [mm]: 270
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Width [mm]: 61
• Supplementary Article/Supplementary Info: without lever
• Brake System: ATE
• Inner brake drum diameter [mm]: 255
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Production date from: 2003-08-31
• for RPO number from: 09793
• Fitting Position: Front Axle
• Thickness [mm]: 19.4
• Length [mm]: 146.6
• Width [mm]: 59.8
• Brake System: TRW
• WVA Number: 20261, 20267
• for OE number: 1617258380
• Manufacturer: ASHIKA

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4388A, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 136
• Width [mm]: 25.4
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,295
• Name: Hammasrihm
• Manufacturer: GAT

• for RPO number from: 09793
• Payload [kg]: 800, 900
• Fitting Position: Front Axle
• Width [mm]: 146.6
• Thickness [mm]: 19
• Height [mm]: 60
• Wear Warning Contact: incl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Payload [kg]: 815
• Fitting Position: Front Axle
• Thickness [mm]: 19
• Length [mm]: 140
• Width [mm]: 69
• Brake System: Bendix
• WVA Number: 23003, 23042
• for OE number: 425125
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Width [mm]: 147
• Thickness [mm]: 18
• Height [mm]: 60
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas - TRW
• Warning Contact Length [mm]: 165
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Driven Units: Camshaft
• Number of Teeth: 136
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.215
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Production date from: 2003-08-31
• for RPO number from: 09793
• Fitting Position: Front Axle
• Thickness [mm]: 19.4
• Length [mm]: 146.6
• Width [mm]: 59.8
• Brake System: TRW
• WVA Number: 20261, 20267
• for OE number: 1617258380
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 61
• Brake System: Bendix
• Inner brake drum diameter [mm]: 255
• Name: BR S 23 517
• Manufacturer: BREMBO

• Payload [kg]: 815
• Fitting Position: Front Axle
• Thickness [mm]: 19
• Length [mm]: 140
• Width [mm]: 69
• Brake System: Bendix
• WVA Number: 23003, 23042
• for OE number: 425125
• Manufacturer: JAPKO

• Payload [kg]: 800
• for RPO number up to: 09155
• Fitting Position: Front Axle
• Width [mm]: 139.6
• Height [mm]: 68.8
• Thickness [mm]: 19
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: Bendix
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Brake System: BENDIX
• Width [mm]: 140
• Height [mm]: 68.7
• Thickness [mm]: 18
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 23042
• Weight [kg]: 1.66
• Manufacturer: VALEO

• for RPO number from: 09156
• Production date from: 02.12.2001
• for RPO number up to: 09792
• Production date to: 30.08.2003
• Payload [kg]: 815, 900
• Block Separation:
• Fitting Position: Front Axle
• Width [mm]: 130
• Height [mm]: 58.8
• Thickness [mm]: 19.3
• Wear Warning Contact: with integrated wear sensor
• Brake System: Girling
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 04.1996
• Fitting Position: Rear Axle
• Diameter [mm]: 255
• Width [mm]: 61
• Brake Type: Drum Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Engine Code: D8B (XUD9TE)
• Production number from: 07390
• Production number to: 07389
• Width [mm]: 34
• for OE number: 0829.33
• Material: Metal
• Outer Diameter [mm]: 60
• Manufacturer: KAMOKA

• Width [mm]: 61
• Brake System: Bendix
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 255
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MAX

• Engine Code: D8B (XUD9TE)
• Production number from: 07390
• Production number to: 07389
• Width [mm]: 34
• for OE number: 0830.13
• Material: Metal
• Outer Diameter [mm]: 60
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• for RPO number from: 9793
• Production date from: 2003-08-31
• Width [mm]: 147
• Height [mm]: 59.9
• Thickness [mm]: 19.3
• Wear Warning Contact: with integrated wear sensor
• Brake System: Lucas
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 130
• Height [mm]: 58.7
• Thickness [mm]: 18.2
• Number of wear indicators [per axle]: 4
• Warning Contact Length [mm]: 240
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 21801
• Weight [kg]: 1.66
• Manufacturer: VALEO
• Name: VA 301064

Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact

• Engine Code: XUD9TE
• Production number to: 07389
• Diameter [mm]: 60
• Width [mm]: 34
• Tensioner Pulley Actuation: Manual
• Manufacturer: SKF

• Payload [kg]: 815
• Length [mm]: 139.8
• Width [mm]: 68.9
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with anti-squeak plate, with fastening material
• Fitting Position: Front Axle
• Thickness 1 [mm]: 18.5
• Wear Warning Contact: incl. wear warning contact
• Weight [kg]: 1.663
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 09156
• Vehicle Identification Number (VIN) to: 09792
• Fitting Position: Front Axle
• Payload [kg]: 800, 900
• Quantity per packing unit: 4
• Height [mm]: 58.9
• Thickness [mm]: 19
• Warning Contact Length [mm]: 240, 190
• Width [mm]: 129.9
• Brake System: TRW
• Supplementary Article/Info 2: with bolts/screws
• Number of wear indicators [per axle]: 4
• Manufacturer: LPR

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: E1 90R-01881/539
• Brake System: Bendix
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 23042
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: incl. wear warning contact
• Width 1 [mm]: 139.8
• Width 2 [mm]: 139.6
• Height 1 [mm]: 68.6
• Height 2 [mm]: 68.6
• Thickness 1 [mm]: 18
• Thickness 2 [mm]: 18
• Manufacturer: DELPHI

• for RPO number from: 09793
• Production date from: 31.08.2003
• Height [mm]: 59.9
• Thickness [mm]: 19.3
• Wear Warning Contact: with integrated wear sensor
• Brake System: Lucas
• Fitting Position: Front Axle
• Width [mm]: 147
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• for RPO number up to: 09155
• Construction Year from: 04.1996
• Payload [kg]: 800
• Fitting Position: Front Axle
• Width [mm]: 139.8
• Thickness [mm]: 19
• Height [mm]: 68.8
• Wear Warning Contact: incl. wear warning contact
• Brake System: Bendix
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Thickness [mm]: 18
• Height [mm]: 59
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: with integrated wear sensor
• Warning Contact Length [mm]: 240
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Diameter [mm]: 255
• Width [mm]: 61
• Supplementary Article/Supplementary Info: with accessories
• Net weight [kg]: 3.05
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Width [mm]: 34
• Outer Diameter [mm]: 60
• Material: Metal
• Weight [kg]: 0.7
• for OE number: 0829.33
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for RPO number up to: 9155
• Production date to: 2001-12-01
• Payload [kg]: 815
• Width [mm]: 140
• Height [mm]: 68.6
• Thickness [mm]: 19
• Wear Warning Contact: with integrated wear sensor
• Number of wear indicators [per axle]: 2
• Brake System: Bendix
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• for RPO number up to: 09155
• Payload [kg]: 815
• Production date to: 01.12.2001
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 18.5
• Width [mm]: 139.9
• Height [mm]: 68.8
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: BENDIX
• Warning Contact Length [mm]: 280
• Weight [kg]: 1.6
• Manufacturer: TOMEX

• Vehicle Equipment: for vehicles with automatic climate control
• Outer Diameter 1 [mm]: 60
• Width 1 [mm]: 34
• Manufacturer: SNR /NTN-SNR/

• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 18,3
• Pikkus (mm): 139,7
• Kõrgus (mm): 68,8
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: Bendix
• Hoiatuskontakti pikkus (mm): 270
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN) from: 09793
• Fitting Position: Front Axle
• Payload [kg]: 800, 900
• Quantity per packing unit: 4
• Brake System: TRW
• Thickness [mm]: 19
• Warning Contact Length [mm]: 170
• Width [mm]: 146.6
• Height [mm]: 59.6
• Number of wear indicators [per axle]: 2
• Manufacturer: LPR

• Wheelbase: for shortened wheelbase
• Fitting Position: Rear Axle
• Diameter [mm]: 255
• Width [mm]: 61
• Supplementary Article/Supplementary Info: without spring
• Brake System: Bendix/Bosch
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 254
• Width [mm]: 61
• Weight [kg]: 3.25
• Brake System: BOSCH/BENDIX
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• for brake disc diameter [mm]: 281
• Fitting Position: Front Axle
• Brake System: Girling-Lucas
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 58.9
• Wear Warning Contact: incl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 130
• Thickness 1 [mm]: 19
• Manufacturer: METELLI UKL.HAMULCOWY

• Brake System: Girling
• Length [mm]: 129.8
• Width [mm]: 58.9
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 18.4
• Wear Warning Contact: incl. wear warning contact
• Weight [kg]: 1.744
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Thickness [mm]: 19
• Height [mm]: 68
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: with integrated wear sensor
• Warning Contact Length [mm]: 270
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Front Axle
• Wheelbase: short wheelbase
• Width 1 [mm]: 139.9
• Height 1 [mm]: 68.8
• Thickness 1 [mm]: 18.5
• Brake System: BOSCH/BENDIX
• Warning Contact Length [mm]: 280
• Manufacturer Restriction: BENDIX
• Wear Warning Contact: incl. wear warning contact
• Weight [kg]: 1.68
• Number of wear indicators [per axle]: 2
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• for RPO number from: 09793
• Production date from: 31.08.2003
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 19
• Width [mm]: 147
• Height [mm]: 59.6
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: TRW
• Warning Contact Length [mm]: 175
• Weight [kg]: 2.1
• Manufacturer: TOMEX

• Construction Year from: 04.1996
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 255
• Width [mm]: 61
• Manufacturer: JP GROUP
• Lisainfo: Brake Shoe Set
• Additional information: Brake Shoe Set

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: BENDIX
• Inner brake drum diameter [mm]: 256
• Width [mm]: 61
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Wheelbase: for shortened wheelbase
• Quantity per packing unit: 4
• Manufacturer Restriction: BENDIX
• Width [mm]: 139.9
• Height [mm]: 68.8
• Thickness [mm]: 18.5
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Warning Contact Length [mm]: 270
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01024/124
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Payload [kg]: 800, 900
• for RPO number from: 09156
• for RPO number up to: 09792
• Block Separation:
• Fitting Position: Front Axle
• Width [mm]: 129.8
• Height [mm]: 58.9
• Thickness [mm]: 19.1
• Number of wear indicators [per axle]: 4
• Wear Warning Contact: incl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Front Axle
• for RPO number up to: 9155
• Payload [kg]: 815
• Quantity per packing unit: 4
• Width [mm]: 140
• Thickness [mm]: 19
• Height [mm]: 69
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Bendix
• Warning Contact Length [mm]: 270
• Supplementary Article/Info 2: with anti-squeak plate
• Number of wear indicators [per axle]: 2
• WVA Number: 23042
• Name: BR P 23 072
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Wheelbase: long wheelbase
• Width 1 [mm]: 129.9
• Height 1 [mm]: 58.9
• Thickness 1 [mm]: 19.3
• Brake System: LUCAS/TRW
• Warning Contact Length [mm]: 190, 245
• Manufacturer Restriction: TRW
• Wear Warning Contact: incl. wear warning contact
• Weight [kg]: 1.68
• Number of wear indicators [per axle]: 4
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS