Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle Right
- Installatsiooni pool: Tagasild
- Pikkus (mm): 258
- Keermemõõt 1: M10x1
- Keermemõõt 2: M10x1
- Pöördeliik: koos sisevindiga
- Name: Pidurivoolik
- Manufacturer: MAX
- Fitting Position: Front Axle
- Length [mm]: 325
- Internal Thread [mm]: M10x1
- External Thread [mm]: M10x1
- Required quantity: 2
- Name: PIDURIVOOLIK
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Length [mm]: 280
- Net weight [kg]: 0.08
- Name: PIDURIVOOLIK
- Manufacturer: NK
-
Fitting Position: Rear Axle,
Left, Right - Length [mm]: 278
- Thread Size 1: F10X1
- Thread Size 2: F10X1
- Manufacturer: BREMBO
- Fitting Position: Rear Axle Left
- Length [mm]: 276
- Thread Size 1: INN M10x1.0
- Thread Size 2: INN M10x1.0
- paired article number: SL 3257
- Weight [kg]: 0.12
- Manufacturer: ABS
- Fitting Position: Rear Axle
- Length [mm]: 276
- Net weight [kg]: 0.09
- Name: PIDURIVOOLIK
- Manufacturer: NK
- Fitting Position: Front Axle
- Length [mm]: 435
- Net weight [kg]: 0.09
- Name: PIDURIVOOLIK
- Manufacturer: NK
- Fitting Position: Front Axle
- Length [mm]: 355
- Thread Size 1: OUT M10x1.0
- Thread Size 2: INN M10x1.0
- Weight [kg]: 0.12
- Manufacturer: ABS
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Internal Thread [mm]: M 10x1
- External Thread [mm]: M 10x1
- Length [mm]: 405
-
Spanner Size: 14/
17 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Length [mm]: 255
- Manufacturer: CORTECO
- Length [mm]: 355
- Internal Thread Size: M10 x 1
- External Thread Size: M10 x 1
-
Spanner Size: 17,
14 -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
- Supplementary Article/Info 2: with buckle protection
- Observe service information:
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front,
Front Axle - Length [mm]: 405
- Manufacturer: CORTECO
- Length [mm]: 410
- Internal Thread Size: M10 x 1
- External Thread Size: M10 x 1
-
Spanner Size: 17,
14 - Weight [kg]: 0.08
- Observe service information:
- Manufacturer: FEBI HAMULCE
Fitting Position: Front Axle Left, Front Axle Right, at brake caliper General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Left,
Right, Front Axle - Length [mm]: 437
- Thread Size 1: F10X1
- Thread Size 2: M10X1
- Manufacturer: BREMBO
-
Fitting Position: Rear Axle,
inner - Length [mm]: 257
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Manufacturer: BOSCH UK£ADY HAMULCOWE
- Length [mm]: 355
- Internal Thread Size: M10 x 1
- External Thread Size: M10 x 1
-
Spanner Size: 17,
14 -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
- Supplementary Article/Info 2: with buckle protection
- Name: SW 62 91 1113
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front,
Rear - Length [mm]: 325
- Manufacturer: CORTECO
- Name: COB 19018166
- Fitting Position: Rear Axle
- Overall Length [mm]: 283
- Thread Size 1: F10x1
- Thread Size 2: F10x1
- Name: PIDURIVOOLIK
- Manufacturer: TRI
-
Fitting Position: Rear Axle,
Left, Right - Length [mm]: 276
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Thread Type: with internal thread
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Length [mm]: 430
- Manufacturer: CORTECO
- Name: COB 19026700
- Fitting Position: Front Axle
- Length [mm]: 330
- External Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Manufacturer: BOSCH
-
Fitting Position: Front Axle,
Left, Right - Length [mm]: 435
- Thread Size 1: M10x1
-
Thread Type: with external thread,
with internal thread - Thread Size 2: M10x1
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle Left
- Length [mm]: 332
- Thread Size 1: M10x1
-
Thread Type: with internal thread,
with external thread - Thread Size 2: M10x1
- Fitting Position: Rear Axle Left
- Length [mm]: 258
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Thread Type: with internal thread
- Fitting Position: Rear Axle Right
- Length [mm]: 258
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Thread Type: with internal thread
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks