Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)




-
Engine Code: LFY
(XU7JP4) - Vehicle Equipment: for vehicles with air conditioning
- Housing Colour: blue
-
Thread Size: M14x1,
25 - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX






-
Fabrication Number: ECP-
AR- 013 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





























































- Number of pins: 2
- Housing Colour: green
- Colour Coding: yellow
- Supplementary Article/Info 2: with seal ring
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- for OE number: 1338.09
- Width [mm]: 33
- Height [mm]: 30
- Length [mm]: 58
- Weight [g]: 53
- Guarantee: 3 years guarantee
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.


- for OE number: 96 033 248
- Width [mm]: 33
- Height [mm]: 30
- Length [mm]: 58
- Weight [g]: 44
- Guarantee: 3 years guarantee
- Number of pins: 2
- Operating Mode: Electric
- Voltage [V]: 12
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.


-
Engine Code: LFY
(XU7JP4) - Vehicle Equipment: for vehicles with air conditioning
- Housing Colour: blue
-
Thread Size: M14x1,
25 - Spanner Size: 19
- Manufacturer: FACET


-
Engine Code: LFY
(XU7JP4) - Vehicle Equipment: for vehicles with air conditioning
- Housing Colour: blue
-
Thread Size: M14x1,
25 - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS


-
Thread Size: M 12x1,
5 - Number of pins: 2
- Housing Colour: green
- Colour Coding: yellow
- Manufacturer: FAE


- Number of pins: 2
- Connector Shape: rectangular
- Socket colour: grey
- Colour Coding: white
-
Thread Size: M 12x1,
5 - Spanner Size: 19
- for OE number: 1920C5
- Manufacturer: MEAT & DORIA





-
Fabrication Number: ECM-
PE- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Transmission Type: Manual Transmission
- for RPO number up to: 7664
- Number of pins: 2
- Manufacturer: DELLO AUTOMEGA


-
Thread Size: M12x1,
5 - Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE






-
Catalytic Converter Type: with two-
way catalytic converter - Supplementary Article/Info 2: without cable
- Housing Colour: white
-
Transmission Type: Manual Transmission,
Automatic Transmission -
Fabrication Number: ESS-
PE- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Number of pins: 3
- Connector Shape: rectangular
- Number of mounting bores: 2
- Rotation Direction: Anticlockwise rotation
- Supplementary Article/Info 2: without cable
- for OE number: 8945205010
- Manufacturer: MEAT & DORIA


-
Engine Code: LFY
(XU7JP4) - Housing Colour: brown
-
Thread Size: M14x1,
25 - Spanner Size: 19
- Manufacturer: FACET


-
Engine Code: LFY
(XU7JP4) - Housing Colour: brown
-
Thread Size: M14x1,
25 - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS




- Pressure from [kPA]: 20
- Pressure to [kPA]: 10
- Number of pins: 3
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.




- Number of pins: 3
- for OE number: 1920 AN
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


- Construction Year from: 04.1999
- Vehicle Equipment: for vehicles without gas operation
- Number of pins: 3
- Manufacturer: DELLO AUTOMEGA



-
Engine Code: LFY
(XU7JP4) - Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Weight [kg]: 0.05
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY


- Transmission Type: Manual Transmission
- Number of pins: 3
- Operating Mode: Mechanical
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: DLP


-
Engine Code: LFY
(XU7JP4) - Housing Colour: yellow
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Manufacturer: FACET


-
Engine Code: LFY
(XU7JP4) - Housing Colour: yellow
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS




- Construction Year to: 11.1998
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV103





- Alternatively:
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Supplementary Article/Info 2: without cable
- Connector Shape: rectangular
- Weight [kg]: 0.024
- Alternative Repair Kit: 550144
- Manufacturer: ERA




-
Engine Code: LFY
(XU7JP4) - Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV100
- Manufacturer: ESEN SKV



- Construction Year from: 04.1999
- Engine Code: LFY
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV106



- Number of pins: 3
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.




- Construction Year from: 04.1999
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Guarantee: 3 years guarantee
- Weight [kg]: 0.07
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV101


- Construction Year from: 04.1999
-
Fuel Type: Petrol/
Gas (Bifuel) - Number of pins: 3
- Pressure from [kPA]: 15
- Pressure to [kPA]: 100
- for OE number: 6238927
- Manufacturer: MEAT & DORIA


- Construction Year from: 04.1999
-
Engine Code: LFY
(XU7JP4) - Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- for OE number: 594621
- Manufacturer: MEAT&DORIA




- Model Year to: 1998
- Number of pins: 3
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


- Construction Year to: 11.1998
- for RPO number up to: 8028
-
Engine Code: LFY
(XU7JP4) - Colour: black
- Supplementary Article/Info 2: with seal ring
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX





- Colour: black
- Alternatively:
- Number of pins: 2
- Fitting Depth [mm]: 18.3
- Weight [kg]: 0.046
- Manufacturer: ERA


-
Engine Code: LFY
(XU7JP4) - Vehicle Equipment: for vehicles without air conditioning
- Housing Colour: blue
- Temperature range [°C]: 118
- Warn Temperature [°C]: 120
-
Thread Size: M14x1,
25 - Spanner Size: 20
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS



- Construction Year from: 04.1999
- Vehicle Equipment: for vehicles without gas operation
-
Engine Code: LFY
(XU7JP4) - Number of pins: 3
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX


- Sensor Type: PTC
-
Thread Size: M 14x1,
25 - Number of pins: 2
- Housing Colour: brown
- Manufacturer: FAE


Manufacturer: MAGNETI MARELLI


- Connector Shape: rectangular
- Number of pins: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Measuring Range from [kPa]: 20
- Measuring Range to [kPa]: 105
- Measuring Range from [V]: 0.39
- Measuring Range to [V]: 4.75
- Number of connectors: 3
- Manufacturer: VERNET


- Construction Year from: 04.1999
- Manufacturer: MAGNETI MARELLI


-
Engine Code: LFY
(XU7JP4) - Transmission Type: Manual Transmission
-
Catalytic Converter Type: with three-
way catalytic converter - Length [mm]: 250
- Manufacturer: FACET


- Fuel Type: Petrol
- Required quantity: 1
-
Name: CZUJNIK CIN. POWIETRZA CITROEN BERLINGO 94-
- Manufacturer: BRM


- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- for OE number: 594623
- Manufacturer: MEAT&DORIA





























































- Weight [kg]: 0.021
- Colour: black
- Number of connectors: 3
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.





-
Fuel Type: Super unleaded
(95), CNG/ LPG - Colour: black
- Alternatively:
- Number of pins: 3
- Weight [kg]: 0.064
- Alternative Repair Kit: 550140
- Manufacturer: ERA



- Number of pins: 3
- Voltage [V]: 12
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX


Manufacturer: MAGNETI MARELLI


- Transmission Type: Automatic Transmission
- Construction Year to: 03.1999
- Cable Length [mm]: 250
- Number of pins: 3
- Housing Colour: green
- Manufacturer: FAE
- Additional information: MD60102
- Lisainfo: MD60102


Manufacturer: MAGNETI MARELLI




-
Emission Standard: Euro 3
(D3) -
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





























- Construction Year to: 11.1997
- Transmission Type: Manual Transmission
- for RPO number up to: 7664
- Block Separation:
- Construction Year from: 04.1999
- Manufacturer Restriction: SAGEM
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS


- Construction Year from: 04.1999
- Vehicle Equipment: for vehicles without gas operation
- Number of pins: 3
- Pressure from [kPA]: 20
- Pressure to [kPA]: 105
- for OE number: 9639418880
- Manufacturer: MEAT&DORIA


- Voltage [V]: 12
- Cable Length [mm]: 180
- Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE ELEKTRYKA


- Construction Year from: 12.1998
- for RPO number from: 8057
- Number of pins: 3
- Pressure from [kPA]: 23
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: DLP




-
Emission Standard: Euro 3
(D3) - Length [mm]: 410
-
Fabrication Number: ESL-
CT- 007 - Manufacturer: NTY
-
Name: NTY ESL-
CT- 007
Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





- for RPO number from: 08057
- Alternatively:
- Number of pins: 3
- Pressure from [kPA]: 20
- Pressure to [kPA]: 105
- Weight [kg]: 0.022
- Alternative Repair Kit: 550130
- Manufacturer: ERA


-
Engine Code: LFY
(XU7JP4) - Transmission Type: Manual Transmission
-
Catalytic Converter Type: with two-
way catalytic converter - Manufacturer Restriction: SAGEM
- Housing Colour: white
- Manufacturer: FACET


- Measuring Range from [kPa]: 15
- Measuring Range to [kPa]: 100
- Measuring Range from [V]: 0.21
- Measuring Range to [V]: 4.75
- Number of connectors: 3
- Manufacturer: VERNET


- Construction Year to: 03.1999
- Transmission Type: not for automatic transmission
- Colour: green
- Cable Length [mm]: 180
- Number of pins: 3
- Name: DE AS10185
- Manufacturer: DELPHI


-
Engine Code: LFY
(XU7JP4) - Transmission Type: Manual Transmission
-
Catalytic Converter Type: with two-
way catalytic converter - Manufacturer Restriction: SAGEM
- Housing Colour: white
- Name: DETONATSIOONIANDUR
- Manufacturer: EPS



- Transmission Type: Manual Transmission
- Length [mm]: 45
- Thickness [mm]: 18
- Inner Diameter [mm]: 8
- Number of connectors: 2
- Weight [kg]: 0.045
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Thread Size: 12 mm
- Supplementary Article/Info 2: with cable
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: VER





























































- Construction Year from: 09.1997
- Transmission Type: Manual Transmission
- Weight [kg]: 0.046
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.





-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Connector/Clamp: Connector may need adjustment
- Number of circuits: 4
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
UV- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA


- for control unit manufacturer: Sagem
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE


- Construction Year from: 04.1999
- Colour: black
- Number of pins: 3
- Pressure from [kPA]: 20
- Pressure to [kPA]: 100
- Manufacturer: FAE


- Construction Year to: 12.1998
- Manufacturer Restriction: Bosch
- for RPO number up to: 8056
-
for model code:
(- ) LPG - Number of pins: 3
- Pressure from [kPA]: 22
-
Name: DE PS20081-
12B1 - Manufacturer: DELPHI


- Construction Year from: 04.1999
- Fitting Position: before catalytic converter
- Manufacturer Restriction: Bosch
- not for manufacturer exhaust gas norm: EURO2000;CEE2000
- Block Separation:
- Construction Year to: 12.1996
-
Oxygen Sensor: Regulating Probe,
Heated - for RPO number from: 7084
- for RPO number up to: 7329
-
Engine Code: LFY
(XU7JP4) - Number of circuits: 4
- Overall Length [mm]: 410
- Name: LAMBDA ANDUR
- Manufacturer: MAX






























































Air Pressure Sensor,
VEMO
-
Engine Code: LFY
(XU7JP4) - Length [mm]: 76.5
- Width [mm]: 65
- Height [mm]: 30
-
Weight [kg]: 0.03,
0.061 - Colour: black
- Number of pins: 3
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04


Manufacturer: MAGNETI MARELLI



- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: JAPKO





























































- for RPO number up to: 07083
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 570
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Weight [kg]: 0.144
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.






























- Construction Year from: 04.1999
- Manufacturer Restriction: Bosch
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS




- Oxygen Sensor: Diagnostic Probe
-
Length [mm]: 1,
500 -
Fabrication Number: ESL-
CT- 018 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- for facelift:
- Manufacturer Restriction: Bosch
- not for emission standard: CEE 2000
-
Oxygen Sensor: Regulating Probe,
Planar probe - Exhaust System: before catalytic converter
- Number of pins: 4
- Length [mm]: 440
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.



- Sensor Type: Piezoelectric Sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 3
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MEY


- Cable Length [mm]: 250
- Number of pins: 3
- Housing Colour: green
- Manufacturer: FAE


- Construction Year from: 04.1999
-
Oxygen Sensor: Regulating Probe,
Heated - for manufacturer exhaust gas norm: EURO2000;CEE2000
-
Engine Code: LFY
(XU7JP4) - Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 410
- Name: LAMBDA ANDUR
- Manufacturer: MAX










































































Air Pressure Sensor,
DELPHI
- Quantity: 1
- Number of pins: 3
- Pressure from [kPA]: 20
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: DLP


- Oxygen Sensor: Regulating Probe
-
Emission Standard: Euro 3
(D3) - Fitting Position: Front
- Length [mm]: 550
- Number of connectors: 4
- Manufacturer: VERNET










































































- Transmission Type: Manual Transmission
-
Catalytic Converter Type: with two-
way catalytic converter - Block Separation:
- for RPO number from: 7665
- Number of pins: 2
- Manufacturer: DELPHI

-
Cable Length [mm]: 1,
235 - Oxygen Sensor: Diagnostic Probe
- Number of circuits: 4
- Manufacturer: DELLO AUTOMEGA


-
Engine Code: LFY
(XU7JP4) - Manufacturer Restriction: BOSCH
- Pressure from [kPA]: 20
- Pressure to [kPA]: 105
- Output Voltage, from [V]: 0.391
- Output Voltage, up to [V]: 4.75
- Manufacturer: FACET


-
Engine Code: LFY
(XU7JP4) - Manufacturer Restriction: BOSCH
- Pressure from [kPA]: 20
- Pressure to [kPA]: 105
- Output Voltage, from [V]: 0.391
- Output Voltage, up to [V]: 4.75
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: EPS


-
Construction Year from: 04.1999,
01.1997 -
Oxygen Sensor: Regulating Probe,
Heated -
Manufacturer Restriction: Bosch,
SAGEM - not for manufacturer exhaust gas norm: EURO2000;CEE2000
- Block Separation:
-
Construction Year to: 12.1996,
03.1999 -
for RPO number from: 7084,
7330 - for RPO number up to: 7329
-
Engine Code: LFY
(XU7JP4) - Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX





-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Fitting Position: before catalytic converter
- Emission Standard: Euro 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY


- Fitting Position: before catalytic converter
-
Oxygen Sensor: Regulating Probe,
Planar probe - Emission Standard: CEE 2000
- Number of pins: 4
- Length [mm]: 455
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Number of pins: 3
- Pressure from [kPA]: 20
- Pressure to [kPA]: 100
- Manufacturer: FAE





























































- Construction Year from: 12.1996
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 400
- Number of connectors: 4
- Weight [kg]: 0.133
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Cable Length [mm]: 525
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 3
- Fitting Position: before catalytic converter
- Cable Length [mm]: 370
- Name: LAMBDA ANDUR
- Manufacturer: DLP


- Number of pins: 3
- Pressure from [kPA]: 15
- Pressure to [kPA]: 100
- Manufacturer: FAE


-
Pressure [Pa] from: 20,
000 -
Pressure [Pa] to: 100,
000 - Voltage [V]: 5
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PP009400221
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Alternatively:
- Cable Length [mm]: 400
- Name: LAMBDA ANDUR
- Manufacturer: DLP


- Supplementary Article/Info 2: without cable
-
Pressure [Pa] from: 20,
000 -
Pressure [Pa] to: 105,
000 - Voltage [V]: 5
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.




-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Voltage [V]: 12
- Length [mm]: 630
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV042


- Construction Year from: 04.1999
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe, Heated - for manufacturer exhaust gas norm: EURO2000;CEE2000
- Block Separation:
-
Engine Code: LFY
(XU7JP4) - Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
Fitting Position: after catalytic converter, before catalytic converter


- for RPO number from: 08057
- Number of connectors: 3
- Colour: black
- Operating Mode: Electric
- Weight [kg]: 0.023
- Supplementary Article/Info 2: with seal ring
- for OE number: 1920.AN
- Manufacturer: FEBI BILSTEIN
Technical Information: Please compare the connection plug version to precisely identify the parts. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Cable Length [mm]: 400
- Manufacturer: DELPHI
-
Name: DE ES20272-
12B1



-
Oxygen Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 570
- Weight [kg]: 0.102
- for OE number: 1628.8Z
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



-
for manufacturer exhaust gas norm: EURO 2000,
CEE 2000 - Oxygen Sensor: Regulating Probe
- Overall Length [mm]: 420
- Number of circuits: 4
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: HU 135335
- Manufacturer: HITACHI


- Number of pins: 3
- Guarantee: 5 years guarantee
- Manufacturer: HUCO




- Construction Year to: 12.1996
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 100
- Gross Weight [g]: 149
- Manufacturer: DENSO
-
Name: DN DOX-
0120 - Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Cable Length [mm]: 380
- Name: LAMBDA ANDUR
- Manufacturer: DLP





























































-
Fitting Position: Front,
after catalytic converter -
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Emission Standard: Euro 3
(D3) -
Line insulation design: with silicone-
coated woven- fibre insulation - Weight [kg]: 0.187
- Socket colour: blue
- Connector Shape: rectangular
- Number of pins: 4
-
Thread Size: M18 x 1,
5 - for OE number: 1628 HV
-
Cable Length [mm]: 1,
320 -
Length [mm]: 1,
490 - Number of circuits: 4
- Version: ZR PLANAR
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


-
Oxygen Sensor: Regulating Probe,
Heated - Emission Standard: Euro 3
- Fitting Position: before catalytic converter
- Cable Length [mm]: 300
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.




- Construction Year from: 12.1996
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
106 I (1A, 1C), 08.9
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
106 I (1A, 1C), 08.9
(kvaliteediklass: Q)"



-
Oxygen Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 570
- Weight [kg]: 0.102
- for OE number: 1628.8Z
- Name: SW 33 10 3127
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


Manufacturer: MAGNETI MARELLI


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Cable Length [mm]: 630
- Manufacturer: DELPHI
-
Name: DE ES20234-
12B1


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Cable Length [mm]: 530
- Name: LAMBDA ANDUR
- Manufacturer: DLP

- Conductor Number: 4
- Number of circuits: 4
- Length [mm]: 400
- Resistor [Ohm]: 9
- Cable Length [mm]: 400
- Oxygen Sensor: Heated
- Manufacturer: MAGNETI MARELLI




- Oxygen Sensor: Heated
-
Thread Size: M18 x 1,
5 - Number of pins: 4
- Connector Shape: rectangular
- Overall Length [mm]: 600
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.


- Operating Mode: pneumatic
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: PIE































- Construction Year from: 04.1999
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Emission Standard: CEE 2000
- Number of circuits: 4
- Overall Length [mm]: 410
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS


- Oxygen Sensor: Regulating Probe
- Construction Year to: 12.1996
- Length [mm]: 400
- Number of pins: 4
- Technical Information Number: Universal 77008
- Manufacturer: FAE






- Construction Year to: 12.1996
-
Exhaust System: for pre-
catalytic converter - for OE number: 16287S
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 540
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 133
- Manufacturer: DENSO
-
Name: DN DOX-
1535
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor






























-
Construction Year from: 04.1999,
01.1997 - Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Manufacturer Restriction: Bosch,
SAGEM - not for emission standard: CEE 2000
- Block Separation:
-
Construction Year to: 12.1996,
03.1999 -
for RPO number from: 7084,
7330 - for RPO number up to: 7329
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS


-
Engine Code: LFY
(XU7JP4) - Manufacturer Restriction: HELLA
- Pressure from [kPA]: 15
- Pressure to [kPA]: 102
- Output Voltage, from [V]: 0.261
- Output Voltage, up to [V]: 4.958
- Manufacturer: FACET


-
Engine Code: LFY
(XU7JP4) - Manufacturer Restriction: HELLA
- Pressure from [kPA]: 15
- Pressure to [kPA]: 102
- Output Voltage, from [V]: 0.261
- Output Voltage, up to [V]: 4.958
- Name: EP 1.993.001
- Manufacturer: EPS


































































- for RPO number up to: 07083
-
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: round
- Conductor Number: 4
- Cable Length [mm]: 450
-
Thread Size: M18 x 1,
5 - Length [mm]: 570
-
Version: ZR-
PLANAR - Weight [kg]: 0.143
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


-
Length [mm]: 1,
520 - Number of circuits: 4
- Conductor Number: 4
- Resistor [Ohm]: 9
-
Cable Length [mm]: 1,
520 - Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG


- Transmission Type: Manual Transmission
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Slider
- Connector Shape: rectangular
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.





























































-
Engine Code: LFY
(XU7JP4) -
Line insulation design: with silicone-
coated woven- fibre insulation - Supplementary Article/Info 2: without plug
- Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Fitting Position: after catalytic converter
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.






























- Construction Year from: 04.1999
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Emission Standard: CEE 2000
- Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter






























































- Construction Year to: 12.1996
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Oxygen Sensor: Planar probe,
Heated, Thread pre- greased - Supplementary Article/Info 2: without plug
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Emission Standard: Euro 2
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
-
Cable Length [mm]: 1,
500 - Weight [kg]: 0.135
- for OE number: 1628.HQ
- Name: SW 33 10 3160
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Oxygen Sensor: Regulating Probe
- Emission Standard: Euro 2
- Fitting Position: Front
- Length [mm]: 640
- Number of connectors: 4
- Manufacturer: VERNET


- Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
235 -
Oxygen Sensor: Planar probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES20307-
12B1


-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Cable Length [mm]: 540
- Manufacturer: DELPHI
-
Name: DE ES20258-
12B1


- Oxygen Sensor: Regulating Probe
- Construction Year from: 12.1996
- for manufacturer exhaust gas norm: L3
- Length [mm]: 450
- Number of pins: 4
- Technical Information Number: Universal 77008
- Manufacturer: FAE































- Construction Year from: 04.1999
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Emission Standard: CEE 2000
- Number of circuits: 4
-
Overall Length [mm]: 1,
510 - Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS






- Construction Year from: 12.1996
-
Exhaust System: for pre-
catalytic converter - for OE number: 16287R
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 545
- Number of pins: 4
- Weight [g]: 102
- Gross Weight [g]: 132
- Manufacturer: DENSO
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor


-
Oxygen Sensor: Regulating Probe,
Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 390
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.


-
Oxygen Sensor: Regulating Probe,
Heated - Construction Year from: 04.1999
-
for manufacturer exhaust gas norm: EURO 2000,
CEE 2000 - Length [mm]: 410
- Technical Information Number: Universal 77015
- Manufacturer: FAE


-
Oxygen Sensor: Diagnostic Probe,
Heated - Construction Year from: 04.1999
-
for manufacturer exhaust gas norm: EURO 2000,
CEE 2000 -
Length [mm]: 1,
520 - Number of pins: 4
- Technical Information Number: Universal 77015
- Socket colour: blue
- Manufacturer: FAE


-
Engine Code: LFY
(XU7JP4) - Fitting Position: after catalytic converter
- Emission Standard: Euro 3
-
Length [mm]: 1,
500 -
Cable Length [mm]: 1,
500 - Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.240
- Number of circuits: 4
- Name: EP 1.998.301
- Manufacturer: EPS
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased































- Construction Year from: 04.1999
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Manufacturer Restriction: Bosch
- not for emission standard: CEE 2000
- Block Separation:
- Construction Year to: 12.1996
- for RPO number from: 7084
- for RPO number up to: 7329
- Number of circuits: 4
- Overall Length [mm]: 410
- Available as universal article as well, see article no.: 0258986506
-
Recommended change interval [km]: 100,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS


- Construction Year to: 04.1999
-
Oxygen Sensor: Diagnostic Probe,
Planar probe -
Emission Standard: Euro 3
(D3) - Number of pins: 4
-
Cable Length [mm]: 1,
370 - for OE number: 1628HQ
- Manufacturer: MEAT&DORIA


-
Engine Code: LFY
(XU7JP4) -
Fuel Type: Petrol/
Gas - Emission Standard: Euro 2
-
Oxygen Sensor: Regulating Probe,
Heated - Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 400
- Manufacturer: PIERBURG

-
Engine Code: LFY
(XU7JP4) - Emission Standard: Euro 3
-
Oxygen Sensor: Diagnostic Probe,
Heated - Voltage [V]: 12
- Conductor Number: 4
-
Cable Length [mm]: 1,
640 - Manufacturer: PIERBURG


-
Oxygen Sensor: Regulating Probe,
Heated - Emission Standard: Euro 2
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 530
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PA358103391
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.






























- Construction Year from: 04.1999
- Vehicle Equipment: for vehicles without gas operation
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: BOS