• Engine Code: RHZ (DW10ATED), RHS (DW10ATED)
• Block Separation:
• Pressure [bar]: 0.5
• Housing Colour: grey
• Manufacturer: JP GROUP
• Lisainfo: Oil Pressure Switch
• Additional information: Oil Pressure Switch

• Thread Size: M 16
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Manufacturer: DELLO AUTOMEGA

• for OE number: 133897
• Spanner Size: 21
• Housing Colour: blue
• Manufacturer: KAMOKA

• Engine Code: RHZ (DW10ATED)
• Pressure [bar]: 0.5
• Thread Size: M16 x 1.5
• Spanner Size: 22
• Number of pins: 1
• Manufacturer: KAVO

• Engine Code: RHZ (DW10ATED)
• for OE number: OErefnolongersup
• Pressure [bar]: 0.5
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• for OE number: 1338A7
• Spanner Size: 19
• Housing Colour: green
• Manufacturer: KAMOKA

• Colour Coding: green
• Connector Shape: angular
• Number of pins: 2
• for OE number: 1342631
• Manufacturer: DELLO AUTOMEGA

• Fabrication Number: ECT-CT-001
• Manufacturer: NTY

• Connector Shape: rectangular
• Operating Mode: Hydraulic
• Thread Size: M 16
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Switch point from [bar]: 0.5
• Switch point to [bar]: 0.6
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECC-CT-001
• Thread Size: M16x1,5
• Pressure [bar]: 0.5
• Manufacturer: NTY

• Engine Code: RHZ (DW10ATED)
• Colour: black
• Pressure [bar]: 0.5
• Thread Size: M16x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• for RPO number from: 08211
• for RPO number up to: 08651, 08578
• Emission Standard: Euro 3 (D3), Euro 2
• Block Separation:
• Spanner Size: 19
• Colour: green
• Number of pins: 2
• Thread Size: M12 x 1,5, M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Number of connectors: 1
• Manufacturer: JPN

• VET Number from: 07847
• Thread Size: M 16x1,5
• Housing Colour: grey
• Pressure [bar]: 0.5
• Manufacturer: FAE

• Pressure [bar]: 5
• Housing Colour: grey
• Thread Size: M16x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• for RPO number up to: 08210
• Spanner Size: 21
• Colour: blue
• Number of pins: 3
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Engine Code: RHS (DW10ATED)
• for RPO number from: 08579, 08652, 08575
• Emission Standard: CEE 95, CEE 2000
• Block Separation:
• Fitted Diameter [mm]: 20
• Connector Shape: rectangular
• Colour Coding: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 24268
• Spanner Size: 19
• Housing Colour: blue
• Manufacturer: KAMOKA

• Spanner Size: 22
• Colour: grey
• Number of pins: 1
• Pressure [bar]: 0.5
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• VET Number to: 07846
• Thread Size: M 16x1,5
• Housing Colour: grey
• Manufacturer: FAE

• Colour: grey
• Pressure [bar]: 5
• Housing Colour: grey
• Thread Size: M16x1.5-6g
• Diameter [mm]: 22
• Spanner Size: 22
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: RHZ (DW10ATED)
• Colour: grey
• Pressure [bar]: 0.5
• Thread Size: M16x1,5
• Spanner Size: 21
• Corresponds to the original part in colour: brown
• Manufacturer: FACET

• Engine Code: RHZ (DW10ATED)
• Colour: grey
• Pressure [bar]: 0.5
• Thread Size: M16x1,5
• Spanner Size: 21
• Corresponds to the original part in colour: brown
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.5
• Thread Size: M16x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 9632562080
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Thread Size: M12x1.5
• Number of connectors: 3
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Switch Pressure [bar]: 0.5
• Thread Size: M16x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Spanner Size: 22
• Number of connectors: 1
• Colour: grey
• Shifting Points [bar]: 0.5
• Screw length below head [mm]: 13
• Weight [kg]: 0.045
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 1
• Weight [kg]: 0.046
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: green
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC
• Lisainfo: 55138 AIC
• Additional information: 55138 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Housing Type: Synthetic Material Housing
• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M14x1.25
• Temperature range [°C]: 120
• for OE number: 024268
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: RHZ (DW10ATED)
• for article number: 7.8486, 7.8708, 7.8734, 7.8747, 7.8748, 7.8790
• Manufacturer: FACET

• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer: FAE ELEKTRYKA

• Engine Code: RHZ (DW10ATED)
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.486, 1.880.708, 1.880.734, 1.880.747, 1.880.748, 1.880.790

• Thread Size: M16 x 1,5
• Switch Pressure [bar]: 0.5
• Weight [kg]: 0.047
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Name: NI 207021
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: RHS (DW10ATED)
• for OE number: 1920EN
• Colour: grey
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Fabrication Number: ECP-CT-005
• Manufacturer: NTY

• for OE number: 9632400580
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Thread Size: 20 mm
• Number of pins: 2
• Inner Diameter [mm]: 8.5
• Outer Diameter [mm]: 25.5
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 21
• Supplementary Article/Info 2: with seal ring
• Colour: blue
• Number of pins: 3
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: angular
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Thread Size: M12 x 1,5
• Number of pins: 3
• Manufacturer: ERA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• for RPO number up to: 08210
• Thread Size: M12 x 1,5
• Spanner Size: 21
• Number of pins: 3
• Colour Coding: blue
• Weight [kg]: 0.035
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: RHZ (DW10ATED)
• Housing Colour: green
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10218-12B1

• Height [mm]: 24
• Resistor [Ohm]: 400
• Number of connectors: 2
• Manufacturer: VERNET

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: grey
• Colour Coding: white
• Thread Size: M 12x1,5
• Spanner Size: 19
• for OE number: 1920C5
• Manufacturer: MEAT & DORIA

• Vehicle Equipment: for vehicles without air conditioning
• Manufacturer: FAE

• Fabrication Number: ECP-CT-013
• Manufacturer: NTY

• Housing Type: Synthetic Material Housing
• Housing Colour: green
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 5,000, 600
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: green
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: yellow
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mounting Type: Plugged
• Voltage [V]: 12
• Diameter [mm]: 25.4
• Length [mm]: 53
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: green
• Housing Type: Synthetic Material Housing
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.2004
• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Switch Point [°C]: 115
• Vehicle Equipment: for vehicles without air conditioning
• Number of pins: 2
• Weight [kg]: 0.042
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1,5
• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Height [mm]: 24
• Resistor [Ohm]: 400
• Number of connectors: 2
• Manufacturer: VERNET

• for RPO number from: 08211
• for RPO number up to: 08651, 08578
• Emission Standard: Euro 3 (D3), Euro 2
• Block Separation:
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RHZ (DW10ATED)
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: RHZ (DW10ATED)
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET
• Name: EP 1.830.276

• for RPO number from: 08211
• for RPO number up to: 08651, 08578
• Emission Standard: Euro 3 (D3), Euro 2
• Block Separation:
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Required quantity: 1
• Resistor [Ohm]: 390
• Colour: black
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.041
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for RPO number up to: 08210
• Spanner Size: 21
• Number of connectors: 3
• Colour: blue
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2004
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV500

• Engine Code: RHS (DW10ATED)
• Transmission Type: Manual Transmission
• Connector Shape: rectangular
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for RPO number from: 08211
• for RPO number up to: 08651, 08578
• Emission Standard: Euro 3 (D3), Euro 2
• Block Separation:
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 62 92 6318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• for RPO number up to: 08210
• Spanner Size: 21
• Number of connectors: 3
• Colour: blue
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Name: SW 62 93 7171
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Engine Code: RHZ (DW10ATED)
• Transmission Type: Manual Transmission
• Manufacturer Restriction: BOSCH
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Connector Shape: angled
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Transmission Type: Automatic Transmission
• Length [mm]: 24
• Number of connectors: 2
• Weight [kg]: 0.02
• for OE number: 1920.7N
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1920.7V
• Sensor Type: Active sensor
• Manufacturer: KAMOKA